Toyota Pixis Space Issues: Common Problems and Solutions

By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 18, 2024

1. Common Issues with Toyota Pixis Space

1.1. Issues with the First Generation (2011-2016)

1.1.1. Engine Misfires due to Faulty Spark Plugs

Engine misfires due to faulty spark plugs are a common issue with the Toyota Pixis Space, especially with the first generation models produced between 2011 and 2016. A spark plug is a crucial component in the engine that ignites the fuel-air mixture in the combustion chamber to create the necessary power for the vehicle to run smoothly. When a spark plug fails or malfunctions, the engine may not start, or it may run poorly, causing misfires and other performance issues.

The first-generation Toyota Pixis Space models have reported engine misfires due to faulty spark plugs, which is often caused by wear and tear, contamination, or incorrect installation. In some cases, the misfires may also be due to an issue with the ignition coils, which may also need to be replaced.

To address the issue of engine misfires due to faulty spark plugs, Toyota recommends regular maintenance of the vehicle and replacing the spark plugs at the recommended intervals. Most spark plugs need to be replaced every 30,000 to 50,000 miles, depending on the type of spark plug and the driving conditions. It is important to use the recommended spark plugs for your Toyota Pixis Space model to ensure proper fit and function.

If you experience engine misfires or other performance issues with your Toyota Pixis Space, it is recommended to have the vehicle inspected by a certified mechanic to diagnose and repair the issue. Ignoring engine misfires can lead to further damage to the engine, decreased fuel efficiency, and potential safety hazards.

1.1.2. Transmission Issues with CVT

Transmission issues with the continuously variable transmission (CVT) are a common problem with the Toyota Pixis Space, particularly with the first-generation models produced between 2011 and 2016. The CVT is a type of automatic transmission that uses a belt and pulley system to smoothly change the gears, providing a more fuel-efficient and smoother driving experience. However, some drivers have reported issues with the CVT in their Toyota Pixis Space.

One of the most common problems with the CVT is a lack of power or slow acceleration when starting from a stop or when driving uphill. This issue is often caused by a slipping belt in the transmission, which can result in a loss of power and reduced fuel efficiency. Additionally, some drivers have reported jerking or shuddering when the transmission shifts gears, which can also be attributed to the slipping belt.

To address these issues, Toyota recommends regular maintenance of the CVT, including checking and replacing the transmission fluid at the recommended intervals. It is also important to follow the manufacturer's recommendations for driving and maintenance, such as avoiding rapid acceleration and keeping the transmission cool by not towing heavy loads.

If you experience transmission issues with your Toyota Pixis Space, it is recommended to have the vehicle inspected by a certified mechanic to diagnose and repair the issue. Ignoring transmission issues can lead to further damage to the transmission and potentially other parts of the vehicle, resulting in costly repairs.

1.1.3. Excessive Oil Consumption

Excessive oil consumption is a common issue reported by owners of the first-generation Toyota Pixis Space models produced between 2011 and 2016. This issue can be caused by a number of factors, including worn piston rings, valve seals, or a faulty PCV valve.

When the engine is burning excessive amounts of oil, you may notice blue smoke coming from the exhaust, a burning oil smell, or a drop in the engine's oil level between oil changes. In addition to being a nuisance, excessive oil consumption can lead to engine damage and reduced performance if not addressed promptly.

To address this issue, it is recommended to first check the oil level and top off as needed. It is also recommended to follow the manufacturer's recommended oil change intervals and use the recommended type of oil. If the excessive oil consumption persists, it is recommended to have the vehicle inspected by a certified mechanic who can diagnose and repair the issue.

In some cases, excessive oil consumption can be resolved by replacing worn piston rings or valve seals. A faulty PCV valve can also contribute to excessive oil consumption, as it allows excess pressure to build up in the engine and can cause oil to be burned. Replacing the PCV valve can help resolve this issue.

Regular maintenance and inspections can help prevent excessive oil consumption in the Toyota Pixis Space. It is recommended to follow the manufacturer's recommended maintenance schedule and have the vehicle inspected by a certified mechanic at the first sign of any issues, including excessive oil consumption.

1.2. Issues with the Second Generation (2016-Present)

1.2.1. Engine Knocking due to Faulty Piston Rings

Engine knocking is a common issue reported by owners of the second-generation Toyota Pixis Space models produced from 2016 to present. This issue can be caused by faulty piston rings, which can cause the engine to run rough and reduce performance.

When the engine is experiencing knocking, you may hear a loud knocking or ticking sound coming from the engine. In addition to being a nuisance, engine knocking can lead to engine damage and reduced performance if not addressed promptly.

To address this issue, it is recommended to have the vehicle inspected by a certified mechanic who can diagnose and repair the issue. In some cases, the engine may need to be rebuilt or replaced in order to resolve the issue.

Faulty piston rings can be caused by a number of factors, including wear and tear, improper maintenance, or low-quality oil. Regular maintenance and inspections can help prevent engine knocking and other issues with the engine.

It is recommended to follow the manufacturer's recommended maintenance schedule and use the recommended type of oil. Using high-quality oil and performing regular oil changes can help prevent engine knocking and other issues with the engine.

1.2.2. Issues with Hybrid System

The Toyota Pixis Space second generation models produced from 2016 to present have a hybrid engine option, which provides a fuel-efficient and environmentally friendly option for drivers. However, some owners have reported issues with the hybrid system.

One common issue with the hybrid system is a malfunctioning battery. The hybrid battery may not hold a charge, which can result in reduced fuel efficiency and performance. In some cases, the battery may need to be replaced in order to resolve the issue.

Another issue with the hybrid system is related to the engine's start-stop system. The start-stop system is designed to turn off the engine when the vehicle is stopped, such as at a stop sign or traffic light. However, some owners have reported that the engine does not restart properly, which can result in a loss of power and reduced performance.

In addition to battery and start-stop system issues, some owners have reported issues with the hybrid system's sensors and software. These issues can cause the vehicle to operate improperly, leading to reduced performance and safety concerns.

To address these issues, it is recommended to have the vehicle inspected by a certified mechanic who is experienced with hybrid engines. In some cases, the battery or other components may need to be replaced in order to resolve the issue. Regular maintenance and inspections can also help prevent issues with the hybrid system.

1.2.3. Brake Problems

The Toyota Pixis Space second generation models produced from 2016 to present have been reported to experience brake issues. The brake system is an essential component of any vehicle and is responsible for ensuring the safety of the driver and passengers.

One common issue with the brake system in the Toyota Pixis Space is premature brake wear. Premature brake wear occurs when the brake pads and/or rotors wear down faster than expected. This can lead to decreased braking performance and increased stopping distances, which can be dangerous for the driver and passengers.

Another issue with the brake system is brake fluid leakage. Brake fluid is an essential component of the brake system and is responsible for transmitting force from the brake pedal to the brake calipers. If there is a leak in the brake system, the brake fluid level can become low, which can result in reduced braking performance or a complete loss of brakes.

Additionally, some owners have reported issues with the brake pedal becoming soft or spongy, which can make it difficult to apply the brakes properly. This can be caused by a variety of issues, such as air in the brake lines or a malfunctioning master cylinder.

To address these issues, it is recommended to have the brake system inspected by a certified mechanic who is experienced with Toyota Pixis Space vehicles. In some cases, the brake pads, rotors, or other components may need to be replaced in order to resolve the issue. Regular maintenance and inspections can also help prevent issues with the brake system.

2. Troubleshooting and Solutions

2.1. Engine Misfires

2.1.1. Replace Faulty Spark Plugs

If you are experiencing engine misfires in your Toyota Pixis Space, it could be due to faulty spark plugs. Spark plugs play an essential role in the combustion process, providing the spark that ignites the fuel and air mixture in the engine. When they become worn or damaged, they can cause misfires, which can lead to a variety of issues, including poor performance, decreased fuel efficiency, and even engine damage.

To troubleshoot this issue, the first step is to visually inspect the spark plugs. Look for signs of wear, such as cracks or deposits on the electrode. If the spark plugs appear worn or damaged, they should be replaced immediately.

When replacing spark plugs in your Toyota Pixis Space, it's essential to use the correct type of spark plugs recommended by the manufacturer. Using the wrong type of spark plug can cause further damage to the engine.

Additionally, it's important to ensure that the spark plugs are installed correctly and torqued to the manufacturer's specifications. Over-tightening or under-tightening the spark plugs can cause further issues, including damage to the threads in the engine block.

Regular maintenance, including routine spark plug replacement, can help prevent engine misfires and ensure that your Toyota Pixis Space is running smoothly. If you continue to experience engine misfires after replacing the spark plugs, further diagnosis may be necessary to identify any underlying issues.

2.1.2. Clean Fuel Injectors and Throttle Body

If your Toyota Pixis Space is experiencing engine misfires, it could be due to dirty fuel injectors or a dirty throttle body. Fuel injectors and the throttle body work together to control the air and fuel mixture that goes into the engine. Over time, they can become clogged with dirt, debris, and other contaminants, leading to a restricted airflow and fuel flow, which can cause misfires.

To fix this issue, you will need to clean the fuel injectors and throttle body. This can be done using specialized cleaning solutions and tools. It is recommended to take your vehicle to a certified mechanic for this procedure, as improper cleaning can cause further damage to the engine.

The mechanic will use a specialized cleaning solution to dissolve any dirt and debris that has built up in the fuel injectors and throttle body. They will then use a high-pressure stream of air to flush out the cleaning solution and any remaining debris. This will ensure that the fuel injectors and throttle body are free from any obstruction and functioning properly.

Regular maintenance of your Toyota Pixis Space is important to prevent issues such as engine misfires. It is recommended to have the fuel injectors and throttle body cleaned at least once a year or every 10,000 miles to ensure optimal performance and fuel efficiency.

2.1.3. Check Ignition Coils

If your Toyota Pixis Space is experiencing engine misfires, another component that should be checked is the ignition coils. Ignition coils are responsible for providing the electrical current that powers the spark plugs, which in turn ignite the fuel in the engine. If the ignition coils are not functioning properly, it can lead to misfires, rough idling, and even stalling.

One way to check the ignition coils is to use a multimeter to test the electrical resistance of each coil. The resistance should fall within the manufacturer's specifications. If it does not, then the coil may be faulty and in need of replacement.

Another way to check the ignition coils is to visually inspect them for any signs of damage or wear. Look for cracks or breaks in the casing, as well as signs of corrosion or rust. If any of these issues are present, then the coil may be faulty and need to be replaced.

It's important to note that if one ignition coil is faulty, it's often recommended to replace all of them at once. This is because if one coil has failed, the others may not be far behind and replacing them all at once can prevent future issues.

Overall, checking and potentially replacing faulty ignition coils can be an effective solution to engine misfires in your Toyota Pixis Space. However, it's always important to consult with a qualified mechanic or technician for a proper diagnosis and solution to any issues with your vehicle.

2.2. Transmission Issues with CVT

2.2.1. Check Fluid Levels

One of the most important aspects of maintaining a vehicle's transmission is ensuring that the fluid levels are at the appropriate levels. In the case of the Toyota Pixis Space, which has a Continuously Variable Transmission (CVT), checking the fluid levels regularly can help prevent transmission issues.

Low fluid levels can cause the transmission to overheat, which can lead to internal damage and eventually transmission failure. Additionally, dirty or contaminated fluid can cause issues with the transmission's performance.

To check the fluid levels, first, ensure that the vehicle is parked on a level surface and the engine is turned off. Locate the transmission dipstick, which is typically labeled and located near the transmission. Remove the dipstick, wipe it clean, and reinsert it. Remove the dipstick again and check the fluid level against the markings on the dipstick.

If the fluid level is low, add the appropriate type of transmission fluid until it reaches the recommended level. It is essential to use the correct type of fluid, as using the wrong type can cause further transmission issues.

If the fluid is dirty or contaminated, it may be necessary to have the transmission fluid flushed and replaced. It is recommended to have this done by a professional mechanic who can ensure that the appropriate type of fluid is used, and the transmission is properly serviced.

Regularly checking the fluid levels in the Toyota Pixis Space's CVT can help prevent transmission issues and prolong the life of the transmission.

2.2.2. Replace Transmission Filter

If you're experiencing transmission issues with your Toyota Pixis Space, one of the potential causes could be a clogged or dirty transmission filter. The transmission filter is responsible for trapping contaminants and debris that could cause damage to the transmission system. Over time, the filter can become clogged with accumulated debris, which can restrict the flow of transmission fluid and cause problems with shifting or slipping.

If you suspect that the transmission filter may be the cause of your transmission issues, the first step is to check the fluid level and condition. If the fluid level is low or the fluid is dark and burnt smelling, it's possible that the filter needs to be replaced. It's recommended to consult the owner's manual or a trusted mechanic for guidance on how often to replace the transmission filter.

Replacing the transmission filter is a relatively straightforward process, but it's important to ensure that the replacement filter is the correct one for your vehicle's make and model. It's also essential to use the recommended type and quantity of transmission fluid when refilling the system after replacing the filter.

If you're unsure about the process or lack the necessary tools and equipment, it's always best to consult a professional mechanic. They can help diagnose the issue and perform any necessary repairs or replacements to get your Toyota Pixis Space back on the road.

2.2.3. Replace Transmission if Necessary

If the transmission issues with the Toyota Pixis Space CVT persist despite replacing the filter, it may be necessary to replace the entire transmission. This is often the case when the internal components have become damaged or worn beyond repair. While transmission replacement can be an expensive repair, it may be the only option if the transmission has suffered severe damage.

Before replacing the transmission, it's important to ensure that all other potential causes of the transmission issues have been ruled out. This includes checking the fluid levels, replacing the filter, and inspecting the transmission for any signs of damage. Additionally, it's important to ensure that the replacement transmission is of high quality and has been properly tested and inspected.

To avoid transmission issues in the future, it's important to maintain the transmission by following the manufacturer's recommended maintenance schedule. This includes regular fluid changes and filter replacements. Additionally, it's important to avoid driving habits that can cause excessive wear on the transmission, such as rapid acceleration and abrupt stops.

If you are experiencing transmission issues with your Toyota Pixis Space, it's important to address them as soon as possible to prevent further damage and potentially costly repairs. A professional mechanic can help diagnose and repair the issue and provide guidance on preventative maintenance to avoid future issues.

2.3. Excessive Oil Consumption

2.3.1. Check Oil Levels Regularly

One of the most common issues that Toyota Pixis Space owners may face is excessive oil consumption. This is particularly common in the first generation of the Pixis Space (2011-2016). Excessive oil consumption can be caused by several factors, including worn out piston rings, clogged oil passages, or a faulty PCV valve.

To prevent excessive oil consumption, it is important to regularly check the oil levels in your Pixis Space. You should do this at least once a month or more frequently if you have been experiencing oil consumption issues. If you notice that the oil levels are low, you should add oil immediately to prevent damage to the engine.

It is also important to use the correct type of oil for your Pixis Space, as recommended in the owner's manual. Using the wrong type of oil can cause excessive oil consumption and other engine problems.

If you suspect that your Pixis Space is consuming too much oil, you may need to take it to a mechanic for diagnosis and repair. The mechanic may need to replace the piston rings or perform other repairs to resolve the issue.

Regular maintenance, such as changing the oil and oil filter as recommended, can help prevent excessive oil consumption and other engine problems in your Toyota Pixis Space.

2.3.2. Replace Piston Rings

If you're experiencing excessive oil consumption in your Toyota Pixis Space, one possible cause could be faulty piston rings. Piston rings are responsible for sealing the combustion chamber, preventing oil from entering and being burned along with fuel. When piston rings fail, oil can slip past them and get burned up during the combustion process, leading to increased oil consumption and potentially engine damage over time.

To troubleshoot this issue, it's recommended to start by checking the oil level regularly and topping up as needed to ensure the engine has sufficient lubrication. If the oil level is consistently low despite regular top-ups, it may be time to replace the piston rings.

Replacing piston rings is a complex process and is best done by a professional mechanic. The mechanic will need to remove the engine from the vehicle and disassemble it to access the piston rings. Once the rings have been replaced, the engine will need to be reassembled and reinstalled.

It's worth noting that excessive oil consumption can have multiple causes, and replacing the piston rings may not necessarily solve the problem. If you're unsure what's causing your Toyota Pixis Space's oil consumption, it's best to bring it to a trusted mechanic for a diagnosis.

2.3.3. Check for Leaks

One of the potential causes of excessive oil consumption in the Toyota Pixis Space is a leak in the engine. It's essential to regularly check for oil leaks, particularly around the valve cover gasket, oil pan gasket, and oil filter. If you notice any oil leaks, it's crucial to have them repaired promptly to prevent further oil loss and potential engine damage.

It's also important to inspect the PCV valve, which is responsible for regulating crankcase pressure and removing harmful gases from the engine. If the PCV valve is clogged or faulty, it can cause excess oil consumption. Replacing a clogged PCV valve can help reduce oil consumption and prevent further engine damage.

If you have checked for leaks and inspected the PCV valve and still experience excessive oil consumption, it may be necessary to replace the piston rings. Faulty piston rings can allow oil to seep into the combustion chamber, resulting in increased oil consumption. Replacing the piston rings can help improve engine performance and reduce oil consumption.

2.4. Engine Knocking

2.4.1. Replace Faulty Piston Rings

If you hear a knocking sound coming from your Toyota Pixis Space's engine, it could be due to faulty piston rings. Piston rings are responsible for sealing the combustion chamber and keeping the oil from entering it. If the rings are worn out or damaged, oil can enter the combustion chamber, causing a knocking sound.

To troubleshoot and solve engine knocking, you can replace the faulty piston rings. However, replacing piston rings can be a time-consuming and costly process. It requires disassembling the engine and removing the pistons, which means you'll need to take your car to a mechanic for this task.

In addition to replacing the piston rings, it's also essential to check the engine's oil level regularly. Low oil levels can cause engine knocking, and it's crucial to top up the oil to the correct level to prevent further damage.

It's also essential to maintain your car's regular service intervals, as this can help prevent engine knocking due to worn-out piston rings. Regular servicing includes changing the oil, oil filter, and air filter, which can help keep the engine running smoothly and prevent costly repairs in the future.

2.4.2. Check Oil Levels Regularly

One of the common causes of engine knocking in the Toyota Pixis Space is low oil levels. This is because the oil is responsible for lubricating the engine components, and when the oil levels are low, the engine components start to rub against each other, leading to wear and tear, and eventually engine knocking. As a result, it's crucial to check the oil levels regularly and top up the oil as necessary.

Checking the oil levels is an easy process and can be done by following a few simple steps. Firstly, make sure the car is on level ground and the engine is turned off. Next, locate the oil dipstick, which is usually located near the front of the engine. Pull the dipstick out and wipe it clean with a cloth. Insert the dipstick back into the tube, making sure it's fully seated. Pull the dipstick out again and check the oil level. The oil should be between the high and low marks on the dipstick.

If the oil level is low, top it up with the recommended type of oil. It's important to use the recommended type of oil as using the wrong type can cause damage to the engine. After adding the oil, check the oil level again to ensure it's at the correct level. It's also a good idea to check for any oil leaks, which can also contribute to low oil levels and engine knocking.

2.4.3. Avoid Heavy Loads and High-Speed Driving

One of the possible reasons for engine knocking in a Toyota Pixis Space is excessive load on the engine. Heavy loads and high-speed driving can put significant stress on the engine, causing it to knock. To prevent engine knocking, it is important to avoid carrying heavy loads and driving at high speeds for extended periods. This is especially important when driving uphill, as the engine has to work harder to maintain speed.

In addition to avoiding heavy loads and high-speed driving, it is important to maintain the engine properly by following the manufacturer's recommendations for oil changes and other routine maintenance. Regular oil changes are critical to maintaining proper lubrication of the engine components, reducing friction, and preventing engine knocking. It is also important to check the oil levels regularly and top up as needed to prevent the engine from running low on oil.

If engine knocking persists even after following these preventative measures, it may be necessary to have the engine inspected by a qualified mechanic. They can diagnose the problem and recommend the necessary repairs, such as replacing faulty piston rings or other engine components. In some cases, it may be necessary to replace the entire engine if the damage is too severe.

2.5. Issues with Hybrid System

2.5.1. Check Hybrid Battery Health

The Toyota Pixis Space is equipped with a hybrid system that combines a gasoline engine and an electric motor. As with any hybrid vehicle, the battery is a critical component of the system. Over time, the hybrid battery's health may deteriorate, resulting in reduced performance and efficiency. To ensure the hybrid system is functioning optimally, it's essential to check the battery's health regularly.

To check the hybrid battery health, the first step is to inspect the dashboard display for any warning lights or messages related to the battery. If there are no warning signs, a diagnostic test should be performed using a specialized tool. This diagnostic test will determine the battery's state of health, which is expressed as a percentage of its original capacity.

If the battery's health is found to be below the acceptable range, the battery may need to be replaced. However, before replacing the battery, it's essential to check for any underlying issues that may have caused the battery's deterioration. For example, if the battery is exposed to extreme temperatures, this can cause the cells to degrade prematurely. In this case, addressing the root cause of the problem may prevent the new battery from suffering the same fate.

Regularly checking the hybrid battery health and addressing any issues promptly can help to extend the battery's lifespan and ensure the Toyota Pixis Space's hybrid system operates optimally. It's recommended to have the battery checked by a certified technician trained in hybrid vehicle maintenance to ensure accurate diagnosis and repair.

2.5.2. Replace Faulty Components

The Toyota Pixis Space is a hybrid vehicle that is designed to provide high fuel efficiency and a comfortable ride. However, like any other hybrid vehicle, it can experience issues with the hybrid system. One of the most common issues is the failure of the hybrid components, such as the battery, inverters, or electric motors.

To troubleshoot and solve these issues, it is important to regularly check the hybrid battery health using a diagnostic tool. This will help to identify any issues with the battery cells or modules that may be causing the problem. If the battery health is poor, it may be necessary to replace the battery.

In addition, faulty components such as inverters or electric motors can also cause issues with the hybrid system. These components should be checked for proper operation and replaced if necessary. It is also important to check the electrical connections and wiring for any damage or corrosion.

Finally, regular maintenance of the hybrid system, such as replacing the engine air filter, checking the coolant level, and inspecting the drive belts, can help prevent issues with the hybrid system. It is important to follow the manufacturer's recommended maintenance schedule to ensure the longevity and reliability of the hybrid system.

2.5.3. Check for Software Updates

The Toyota Pixis Space is a popular hybrid car that combines fuel efficiency with a spacious interior. However, like any other hybrid car, it may experience issues with its hybrid system. One common troubleshooting step to resolve such issues is to check for software updates.

As hybrid technology evolves rapidly, car manufacturers release software updates to fix bugs and improve system performance. These updates can also address issues with the hybrid system of the Toyota Pixis Space. Car owners can check with their Toyota dealer to see if there are any available software updates for their vehicle.

The update process usually involves connecting the car to a computer and downloading the latest software from Toyota. It is essential to follow the instructions carefully to ensure that the update is successful. Software updates can sometimes resolve issues that are not related to the hybrid system, such as problems with the dashboard display or audio system.

If a car owner notices any issues with their Toyota Pixis Space's hybrid system, they should schedule an appointment with their dealer to check for software updates. It is essential to keep the hybrid system up-to-date to ensure optimal performance and fuel efficiency.

2.6. Brake Problems

2.6.1. Check Brake Pads and Rotors

Regular maintenance of brake pads and rotors is essential for the safe and efficient operation of your Toyota Pixis Space. Brake pads, which are designed to provide friction to stop the vehicle, wear down over time and must be replaced periodically. Rotors, on the other hand, are the disc-shaped components that the brake pads grip onto when the brakes are applied. They can also become worn, warped or damaged, and may need to be replaced or resurfaced to ensure smooth and even braking.

To check your brake pads, you can look through the spokes of your wheel to inspect the pads themselves. If they appear to be less than 1/4 inch thick, it may be time to replace them. Another indication that your brake pads need replacing is if you hear a high-pitched squeaking or grinding noise when applying the brakes. If you notice any of these signs, it's important to have your brake pads inspected and replaced if necessary.

Rotors should be inspected for wear and damage during a routine brake pad replacement. If they are worn or have grooves, scoring, or cracks on their surface, they may need to be resurfaced or replaced. Warped rotors can cause vibration or pulsation in the brake pedal when stopping, so it's important to address any issues promptly.

Regularly checking and maintaining your brake pads and rotors can help prevent more costly and dangerous brake problems in the future. If you're unsure about the condition of your brakes, it's best to have them inspected by a qualified mechanic.

2.6.2. Replace Faulty Components

Brakes are an essential component of any vehicle, including the Toyota Pixis Space. If you experience any brake problems, it's important to diagnose and fix the issue as soon as possible to ensure your safety on the road. One of the most common solutions to brake problems is to replace faulty components. This includes brake pads, rotors, calipers, and brake lines.

Brake pads are a common wear item and need to be replaced periodically. Worn brake pads can cause squealing or grinding noises when you apply the brakes, and may result in longer stopping distances. Similarly, brake rotors can also wear down over time and may need to be replaced. Warped or damaged rotors can cause a pulsation or vibration in the brake pedal when you apply the brakes.

Calipers are responsible for applying the brake pads to the rotors, and faulty calipers can cause uneven braking, leading to longer stopping distances or pulling to one side. Additionally, brake lines can also deteriorate over time, leading to leaks or restricted fluid flow. This can cause a spongy or soft feeling when you apply the brakes.

If you experience any brake problems with your Toyota Pixis Space, it's important to have a certified mechanic inspect and diagnose the issue. They may recommend replacing faulty components to ensure the proper function of your brakes and your safety on the road.

2.6.3. Bleed Brake Lines Regularly

Regularly bleeding the brake lines is an important maintenance task that can help solve and prevent brake problems in your Toyota Pixis Space. Over time, air can get trapped in the brake lines, which can lead to a soft or spongy brake pedal and reduced braking performance. Bleeding the brake lines removes any air bubbles and ensures that the brake system is operating at its maximum efficiency.

To bleed the brake lines, you will need a brake bleeding kit, which includes a hose, a container for collecting brake fluid, and a wrench to open the bleeder valve. Begin by locating the brake fluid reservoir and ensuring that it is filled to the correct level. Then, starting with the brake farthest from the reservoir, attach the hose to the bleeder valve and insert the other end of the hose into the container. Have someone press and hold down the brake pedal while you open the bleeder valve, allowing the old fluid and any air bubbles to flow out of the system. Once the fluid runs clear and free of air bubbles, close the valve and move on to the next brake.

It is recommended to bleed the brake lines at least once a year, or more frequently if you have noticed any issues with your brakes. Regularly inspecting the brake system for any leaks, wear, or damage to the components and replacing any faulty parts can also help prevent brake problems from occurring.

3. Grouping Issues by Models and Trim Levels

3.1. Toyota Pixis Space X

3.1.1. Issues with Engine Misfires

Engine misfires can be a common issue experienced by drivers of the Toyota Pixis Space X, particularly in certain models and trim levels. One of the most common causes of engine misfires is a faulty ignition system, which can cause the spark plugs to not fire properly and result in misfires.

In the Pixis Space X, the issue of engine misfires has been reported primarily in the 660cc engine models, particularly those with the G and L trim levels. This can be caused by a variety of factors, including a malfunctioning ignition coil, faulty spark plugs, or a clogged fuel injector.

To address engine misfires in the Pixis Space X, it is important to first diagnose the specific cause of the issue. This may involve running diagnostic tests to determine if there are any error codes stored in the vehicle's computer system, as well as physically inspecting the ignition system, spark plugs, and fuel injectors for signs of wear or damage.

If the cause of the misfires is determined to be a faulty ignition system component, such as a malfunctioning ignition coil or worn spark plugs, these components should be replaced as soon as possible to prevent further damage to the engine. Additionally, regular maintenance tasks such as changing the engine oil and air filter, and using high-quality fuel can help to prevent engine misfires and ensure the long-term health of the engine.

3.1.2. Transmission Problems

The Toyota Pixis Space X has been known to experience transmission problems. One issue that has been reported is the transmission slipping, which can cause the vehicle to jerk or hesitate while accelerating. This problem can be caused by low transmission fluid levels or dirty transmission fluid. It is important to check the transmission fluid level regularly and replace it according to the manufacturer's recommendations.

Another transmission issue that has been reported in the Toyota Pixis Space X is a shuddering sensation while driving. This can be caused by a faulty torque converter or worn transmission components. It is important to address this issue promptly as it can cause further damage to the transmission.

In some cases, the transmission in the Toyota Pixis Space X may fail completely, requiring a replacement. This can be a costly repair, so it is important to address any transmission issues as soon as they arise to prevent further damage.

It is recommended to take the vehicle to a certified Toyota technician for diagnosis and repair of any transmission problems. They have the expertise and equipment to properly diagnose and repair the issue, ensuring that the vehicle operates safely and efficiently.

3.1.3. Brake Issues

The Toyota Pixis Space X is a compact car that is designed for city driving, but it is still important to have a reliable braking system. Some drivers of the Toyota Pixis Space X have reported brake issues, such as squeaking, grinding, or reduced braking power. These issues can be caused by a number of factors, including worn brake pads, damaged rotors, or brake fluid leaks.

It is important to have your brakes inspected regularly to ensure they are in good working condition. If you notice any of the above-mentioned symptoms, it is recommended to bring your car to a certified Toyota dealer or mechanic for an inspection. They will be able to identify the cause of the issue and recommend a solution.

In some cases, the brake pads may need to be replaced or the rotors may need to be resurfaced or replaced. Brake fluid leaks may also need to be repaired to ensure proper brake function. It is important to address any brake issues as soon as possible to prevent further damage or safety concerns.

Overall, while brake issues can occur in any vehicle, regular inspections and maintenance can help prevent these problems from occurring in your Toyota Pixis Space X.

3.2. Toyota Pixis Space G

3.2.1. Excessive Oil Consumption

Excessive oil consumption is a common issue that has been reported by Toyota Pixis Space G owners. This issue can be caused by a number of factors, including faulty piston rings, worn valve seals, and damaged engine gaskets. The problem can lead to several other issues such as a decrease in fuel efficiency and engine performance.

To troubleshoot the excessive oil consumption issue in Toyota Pixis Space G, it is recommended to first check the oil level and make sure it is not too low or too high. If the oil level is fine, then the next step is to check for leaks in the engine or oil system. It is important to inspect the engine gaskets, valve seals, and piston rings for any signs of wear or damage.

If the issue persists after checking for leaks, it may be necessary to replace faulty piston rings or other engine components that may be causing the issue. Regular maintenance such as changing the oil and filter, and checking the PCV valve can also help to prevent excessive oil consumption.

It is important to address excessive oil consumption in a timely manner to prevent further engine damage and ensure the longevity of the vehicle.

3.2.2. Hybrid System Issues

The Toyota Pixis Space G is equipped with a hybrid system that provides excellent fuel efficiency and a smooth driving experience. However, some owners have reported issues with the hybrid system.

One common issue is a warning light on the dashboard indicating a problem with the hybrid system. This can be caused by a malfunctioning component, such as a faulty hybrid battery, inverter, or motor generator. It is important to have the system diagnosed and repaired by a qualified technician to prevent further damage.

Another issue is a decrease in fuel efficiency over time. This could be caused by a variety of factors, including a deteriorating hybrid battery, worn out tires, or a malfunctioning sensor. Regular maintenance, such as replacing the hybrid battery every 8 years or 100,000 miles, can help prevent this issue.

Finally, some owners have reported a loss of power or stalling while driving. This could be caused by a malfunctioning motor generator or inverter. It is important to have the system diagnosed and repaired as soon as possible to prevent accidents or further damage to the vehicle.

Overall, while the hybrid system in the Toyota Pixis Space G offers many benefits, it is important to be aware of potential issues and to have the system regularly inspected and maintained by a qualified technician.

3.2.3. Brake Problems

The Toyota Pixis Space G is a popular compact car that is known for its fuel efficiency and comfortable ride. However, like any car, it is not immune to issues. One common issue that owners have reported is brake problems.

Some owners have reported issues with the brake system, including squeaking and grinding noises, reduced braking performance, and even brake failure. These issues can be caused by a variety of factors, including worn brake pads, damaged rotors, or brake fluid leaks.

To prevent brake problems in the Toyota Pixis Space G, it is important to maintain the brake system regularly. This includes replacing worn brake pads and damaged rotors, checking for brake fluid leaks, and bleeding the brake lines when necessary. Additionally, drivers should avoid aggressive braking and driving in conditions that can put excess strain on the brakes, such as driving in mountainous areas or towing heavy loads.

If you experience any issues with the brake system in your Toyota Pixis Space G, it is important to address them promptly. Ignoring brake problems can lead to reduced braking performance and even brake failure, which can be dangerous. It is always best to have your car inspected by a qualified mechanic if you experience any issues with the brake system.

3.3. Toyota Pixis Space F

3.3.1. Engine Knocking

The Toyota Pixis Space F is a popular model that is known for its fuel efficiency and reliability. However, one issue that some drivers have reported experiencing is engine knocking. Engine knocking is a problem that occurs when the fuel in the engine combusts at the wrong time, causing a knocking or pinging sound.

One possible cause of engine knocking in the Toyota Pixis Space F is low-quality fuel. If the fuel used in the car has a low octane rating, it may not be able to withstand the high compression ratios of the engine, leading to premature combustion and engine knocking. To avoid this problem, it is important to use high-quality fuel with the recommended octane rating.

Another potential cause of engine knocking in the Toyota Pixis Space F is carbon buildup on the engine's pistons or cylinder walls. Over time, carbon deposits can accumulate in the engine, which can cause the fuel to ignite prematurely and cause knocking. Regular maintenance, such as regular oil changes, can help prevent carbon buildup and reduce the risk of engine knocking.

In some cases, engine knocking may also be caused by a malfunctioning sensor or ignition system. If this is the case, a mechanic will need to diagnose and repair the problem. It is important to address engine knocking as soon as possible to prevent further damage to the engine and ensure the safety of the vehicle.

3.3.2. CVT Transmission Issues

The continuously variable transmission (CVT) used in some Toyota Pixis Space F models has been known to experience issues. Drivers may notice jerking or shuddering when accelerating, as well as delayed or erratic shifting. These symptoms can be caused by a variety of problems, including low transmission fluid levels, worn belts or pulleys, or a malfunctioning control module.

To address these issues, it's important to have the transmission fluid level checked and topped off if necessary. A mechanic may also recommend a transmission fluid flush and filter replacement if the fluid appears dirty or contaminated. Worn belts or pulleys may need to be replaced, while a malfunctioning control module may require reprogramming or replacement.

Regular maintenance, including fluid changes and inspections, can help prevent transmission issues from occurring in the first place. Drivers should also be mindful of driving habits that can put extra strain on the transmission, such as frequent rapid acceleration or towing heavy loads. If you experience any issues with your Pixis Space F's transmission, it's important to have it checked out by a qualified mechanic to prevent further damage and ensure safe driving.

3.3.3. Hybrid System Problems

The Toyota Pixis Space F, like any hybrid vehicle, has a complex powertrain system that combines a gasoline engine with an electric motor. While this setup offers benefits such as increased fuel efficiency and reduced emissions, it also presents potential issues. One common problem with the hybrid system is a malfunctioning hybrid battery. Signs of a faulty battery can include decreased power and acceleration, as well as a warning light on the dashboard. Other hybrid system problems can include issues with the power control unit or inverter.

Another issue that can arise with the Toyota Pixis Space F is transmission problems. Specifically, some drivers have reported issues with the continuously variable transmission (CVT), which can lead to difficulty accelerating and jerky shifting. These issues can be caused by a range of factors, including low transmission fluid levels, a worn or damaged CVT belt, or a malfunctioning CVT control module.

Finally, some Toyota Pixis Space F owners have experienced hybrid system problems beyond just a malfunctioning battery. These can include issues with the power control unit or inverter, which are responsible for controlling the flow of electricity between the gasoline engine, electric motor, and battery. Signs of a problem with these components can include reduced power, difficulty starting the vehicle, and warning lights on the dashboard.

Overall, it is important for Toyota Pixis Space F owners to stay aware of any signs of trouble with their hybrid system or transmission and address them promptly to avoid further damage or more costly repairs.

4. Engine Types and Name of Toyota Pixis Space

4.1. 1KR-FE Engine

4.1.1. Common Issues

The Toyota Pixis Space is equipped with different engine options, with one of the most common being the 1KR-FE engine. This engine is a 1.0-liter, three-cylinder engine that delivers a decent amount of power while being fuel-efficient. However, like any engine, it can experience some common issues.

One common issue with the 1KR-FE engine is excessive oil consumption. Some drivers have reported that their engine burns through oil more quickly than expected, which can lead to engine damage if not addressed. Another issue is engine knocking, which can be caused by a variety of factors, including low-quality fuel or incorrect engine timing.

In addition to these issues, some drivers have reported problems with the engine's variable valve timing (VVT) system, which can cause issues with engine performance and fuel efficiency. Issues with the engine control module (ECM) and ignition coils have also been reported, leading to misfires and reduced engine performance.

To avoid these issues, it is important to follow the manufacturer's recommended maintenance schedule, including regular oil changes and engine tune-ups. Drivers should also use high-quality fuel and ensure that any aftermarket modifications are properly installed and tuned.

4.1.2. Troubleshooting and Solutions

The Toyota Pixis Space is equipped with a 1KR-FE engine, which is a reliable and efficient engine. However, like all engines, it can experience issues from time to time. One common issue with this engine is overheating, which can cause damage to the engine if not addressed promptly. If you notice that your engine temperature gauge is reading higher than normal or if you see steam coming from under the hood, it's important to pull over and let the engine cool down before continuing to drive.

Another issue that can occur with the 1KR-FE engine is misfires. Misfires can be caused by a variety of factors, including faulty spark plugs, a malfunctioning ignition coil, or a clogged fuel injector. To troubleshoot this issue, you should first check the spark plugs and ignition coils to ensure they are functioning properly. If those components are working as intended, then you may need to have the fuel injectors cleaned or replaced.

In addition to these issues, the 1KR-FE engine may also experience oil leaks or burning oil. This can be caused by worn or damaged seals, or by using the wrong type of oil. To avoid oil leaks and burning oil, it's important to have your engine serviced regularly and to use the recommended type of oil.

If you do experience issues with your Toyota Pixis Space's 1KR-FE engine, there are a number of solutions available. Depending on the issue, you may need to replace faulty components, such as spark plugs, ignition coils, or fuel injectors. In some cases, you may also need to have the engine rebuilt or replaced. To ensure that your engine is running smoothly and reliably, it's important to have it serviced by a qualified mechanic who is familiar with the 1KR-FE engine and the Toyota Pixis Space.

4.2. KF-VE Engine

4.2.1. Common Issues

The Toyota Pixis Space comes with a 3-cylinder KF-VE engine. While this engine is generally reliable, there are a few common issues that have been reported by some drivers.

One common issue is excessive oil consumption. This can be caused by worn piston rings, valve guides, or other internal engine components. It is important to monitor oil levels regularly and to address any signs of excessive oil consumption promptly to avoid engine damage.

Another issue that has been reported is rough idling or stalling. This can be caused by a variety of factors, including a dirty or clogged air filter, a malfunctioning idle air control valve, or a faulty ignition coil. Regular maintenance and timely repairs can help to prevent these issues from occurring.

Finally, some drivers have reported problems with the engine overheating or running hot. This can be caused by a variety of factors, including a malfunctioning thermostat, a clogged radiator, or a damaged water pump. Regular maintenance and timely repairs can help to prevent these issues from occurring, and it is important to address any signs of engine overheating promptly to avoid serious engine damage.

4.2.2. Troubleshooting and Solutions

The Toyota Pixis Space comes equipped with the KF-VE engine, which is known for its reliability and efficiency. However, even the most dependable engines can experience problems from time to time. Some common issues that have been reported with this engine include rough idling, lack of power, and stalling.

If you're experiencing any of these issues, there are a few things you can try before taking your vehicle to a mechanic. First, check your air filter and replace it if it's dirty or clogged. A dirty air filter can restrict airflow to the engine, which can cause it to run poorly. Next, check your spark plugs and replace them if they're worn or fouled. Worn or fouled spark plugs can cause misfires and poor engine performance.

Another common issue with the KF-VE engine is oil leaks. If you notice oil spots under your vehicle or a burning smell coming from the engine, you may have an oil leak. Check your oil levels regularly and look for signs of leaks around the valve cover gasket and oil pan gasket.

If you've tried these troubleshooting steps and are still experiencing issues, it may be time to take your Toyota Pixis Space to a mechanic for further diagnosis and repair. They can perform a diagnostic test to identify any specific issues with your engine and recommend the necessary repairs to get it running smoothly again.

5. Maintenance Tips to Prevent Common Issues

5.1. Regular Oil Changes

Regular oil changes are an essential part of maintaining your Toyota Pixis Space's engine health and preventing common issues. Oil is responsible for lubricating the engine components, reducing friction and heat, and removing impurities and debris from the engine.

Without proper lubrication, the engine components can wear out quickly, leading to excessive oil consumption, engine knocking, and other problems. As a general rule, you should change the oil in your Toyota Pixis Space every 5,000 to 7,500 miles or as recommended in the owner's manual.

It's also important to choose the right type of oil for your engine. Toyota recommends using synthetic blend or full synthetic oil for the Toyota Pixis Space. These oils are designed to offer better performance and protection than conventional oils, especially in extreme temperatures.

In addition to regular oil changes, there are other maintenance tips you can follow to prevent common issues with your Toyota Pixis Space. These include checking the oil level regularly, inspecting the engine for leaks or damage, and replacing the air filter as needed. It's also important to follow the manufacturer's recommended maintenance schedule for other components, such as the brakes, transmission, and suspension.

By following these maintenance tips and regularly changing the oil, you can help keep your Toyota Pixis Space running smoothly and prevent common issues from developing. If you do experience any problems, it's important to address them promptly to avoid more significant damage and costly repairs down the line.

5.2. Checking Fluid Levels

One important maintenance tip to prevent common issues with the Toyota Pixis Space is to regularly check fluid levels. This includes engine oil, transmission fluid, brake fluid, power steering fluid, and coolant.

Low fluid levels can cause various problems, including engine overheating, transmission slipping, brake failure, and power steering issues. It's important to check fluid levels regularly, especially before long trips or when the vehicle is showing signs of trouble.

To check engine oil, park the car on a level surface, wait for the engine to cool down, and remove the dipstick. Wipe it clean, reinsert it, and remove it again to check the level. If the level is low, add the recommended type of oil and recheck the level.

To check transmission fluid, warm up the engine and shift through all the gears before parking the car on a level surface. Remove the dipstick, wipe it clean, reinsert it, and remove it again to check the level. If the level is low, add the recommended type of fluid and recheck the level.

To check brake fluid, locate the reservoir under the hood and check the level against the markings on the side. If the level is low, add the recommended type of fluid to the "full" mark.

To check power steering fluid, locate the reservoir under the hood and check the level against the markings on the side. If the level is low, add the recommended type of fluid to the "full" mark.

To check coolant, park the car on a level surface and wait for the engine to cool down. Locate the radiator and check the level against the markings on the side. If the level is low, add the recommended type of coolant and recheck the level.

Regularly checking fluid levels can help prevent common issues and extend the lifespan of your Toyota Pixis Space. It's important to refer to the owner's manual for specific maintenance intervals and recommendations.

5.3. Inspecting Brakes and Tires

Regular inspections of your Toyota Pixis Space's brakes and tires are essential to prevent common issues and ensure the safety of your vehicle. The brake system of your car includes brake pads, rotors, and calipers, which need to be inspected for wear and tear. Over time, brake pads and rotors will start to wear out, causing them to become less effective at stopping the car. In extreme cases, worn-out brakes can lead to accidents. Thus, it's important to have your brakes inspected regularly and replace them when necessary.

The tires of your Toyota Pixis Space are also essential for your safety on the road. Regular inspections can help identify any tire damage, punctures, or wear and tear. Driving with worn-out tires can affect your vehicle's handling, cause blowouts, and increase the risk of accidents. Inspecting your tires regularly can also help you catch any issues with the suspension system, alignment, or steering, which can lead to uneven tire wear.

In addition to regular inspections, it's important to maintain proper tire pressure and alignment. Proper tire pressure ensures better fuel efficiency, reduces tire wear, and provides better handling. Misaligned wheels can cause uneven tire wear, leading to early tire replacement and affecting the handling of your car.

By performing regular inspections of your brakes and tires, you can identify and address any issues before they become bigger problems. This will not only prevent common issues but also help extend the life of your Toyota Pixis Space.

5.4. Checking and Replacing Filters

Regularly checking and replacing filters is an important part of maintaining your Toyota Pixis Space and preventing common issues. There are several filters in your vehicle that need to be checked and replaced periodically.

The engine air filter should be inspected at least once a year and replaced if it is dirty or clogged. A dirty air filter can cause decreased engine performance and reduced fuel efficiency.

The cabin air filter, which filters the air that comes into the passenger compartment, should be replaced every 10,000 to 15,000 miles. A dirty cabin air filter can reduce the effectiveness of your vehicle's heating and air conditioning system and can also affect the air quality inside your car.

The fuel filter should be replaced every 30,000 miles to prevent clogging and maintain proper fuel flow. A clogged fuel filter can cause engine performance issues and may even result in engine damage.

In addition to these filters, it is also important to regularly check and replace the oil filter as part of routine oil changes. A dirty or clogged oil filter can reduce the effectiveness of your engine oil and lead to engine damage over time.

By regularly checking and replacing filters in your Toyota Pixis Space, you can help prevent common issues and ensure that your vehicle runs smoothly and efficiently.

5.5. Scheduled Maintenance and Service

To prevent common issues with the Toyota Pixis Space, it is important to stay on top of scheduled maintenance and service. Following the manufacturer's recommended maintenance schedule is crucial for keeping your vehicle running smoothly and avoiding potential problems down the line.

Regularly scheduled maintenance can include oil changes, tire rotations, brake inspections, and filter replacements. Additionally, it is important to have your vehicle inspected by a professional mechanic at regular intervals, such as every 30,000 miles, to check for any potential issues that may not be immediately noticeable.

By keeping up with regular maintenance, you can avoid more costly and time-consuming repairs in the future. It is also recommended to have any repairs done as soon as possible to prevent further damage and potential safety hazards.

When it comes to scheduled maintenance and service, it is important to choose a reputable and experienced mechanic who is familiar with the Toyota Pixis Space. They can provide guidance on the specific needs of your vehicle and ensure that all necessary maintenance is completed properly and efficiently.

6. Issues with Toyota Pixis Space Generations

6.1. First Generation (2011-2016)

6.1.1. Engine Misfires

The first generation of Toyota Pixis Space, produced from 2011 to 2016, has been known to experience engine misfires. This issue can be caused by a number of factors, including a faulty ignition coil or spark plug, clogged fuel injectors, or a malfunctioning oxygen sensor.

When an engine misfires, it means that one or more cylinders in the engine are not firing properly. This can result in a rough idle, poor acceleration, reduced fuel efficiency, and in some cases, engine damage if left unresolved.

To diagnose and resolve engine misfires in the Toyota Pixis Space, it is recommended to take the vehicle to a qualified mechanic. The mechanic may perform a diagnostic scan of the engine to identify any error codes or warning signs, and may conduct further tests to determine the root cause of the misfire.

Possible solutions to address engine misfires in the Toyota Pixis Space may include replacing faulty ignition components, cleaning or replacing clogged fuel injectors, or replacing a malfunctioning oxygen sensor. Regular maintenance, such as scheduled oil changes and spark plug replacements, can also help prevent engine misfires from occurring in the first place.

6.1.2. Transmission Issues

The first-generation Toyota Pixis Space (2011-2016) is a popular mini MPV in the Japanese market. While it is generally reliable, there have been some reported issues with the transmission system.

One common problem is the automatic transmission slipping or hesitating when shifting gears. Some drivers have also reported difficulty in shifting between gears or experiencing jerky movements while driving. These issues may be due to problems with the transmission fluid, sensors, or solenoids.

Another issue that has been reported is the transmission overheating, which can lead to damage or failure of the transmission system. This can be caused by a variety of factors, including low fluid levels, dirty or worn-out filters, or issues with the cooling system.

If you experience any of these issues, it is important to have your vehicle inspected and serviced by a qualified mechanic. Regular maintenance and servicing, such as checking fluid levels and changing the transmission fluid and filter at recommended intervals, can also help prevent these problems from occurring.

6.1.3. Excessive Oil Consumption

Toyota Pixis Space, like any other vehicle, can develop certain issues over time. One of the common issues reported by some owners of the first-generation Toyota Pixis Space (2011-2016) is excessive oil consumption.

Excessive oil consumption can be caused by a variety of factors, including worn-out piston rings, damaged valve seals, or clogged PCV valves. In the case of the first-generation Toyota Pixis Space, some owners have reported that their vehicles consume an abnormal amount of oil, which can lead to engine damage if not addressed.

To troubleshoot excessive oil consumption, it is recommended to check the oil level regularly and keep track of how often oil needs to be added to the engine. If the oil consumption is significantly higher than normal, then it may be necessary to have the vehicle inspected by a qualified mechanic.

In some cases, the excessive oil consumption can be resolved by replacing the PCV valve or valve seals. However, if the issue is caused by worn-out piston rings, then an engine rebuild or replacement may be necessary.

To prevent excessive oil consumption in the first place, it is essential to perform regular oil changes and use the recommended oil type and viscosity specified by the manufacturer. It is also recommended to avoid overloading the vehicle and driving at high speeds for extended periods, which can put extra stress on the engine.

Overall, excessive oil consumption is a common issue that can affect any vehicle, including the Toyota Pixis Space. Regular maintenance and inspections can help detect and address the problem early, preventing more significant engine damage down the line.

6.2. Second Generation (2016-Present)

6.2.1. Engine Knocking

The Toyota Pixis Space second generation (2016-present) is equipped with the KF-VE engine, which is known for engine knocking issues. Engine knocking is a condition where the engine makes a loud, knocking noise during operation, which can be caused by several factors, including poor fuel quality, low-quality oil, or worn-out engine components.

One of the most common causes of engine knocking in the Toyota Pixis Space is the use of low-quality fuel. When the fuel has a low octane rating, it can cause the engine to knock, which can lead to serious engine damage if not addressed promptly.

Another potential cause of engine knocking in the Toyota Pixis Space is the use of low-quality oil. When the oil is not of the correct viscosity or contains contaminants, it can cause the engine to knock during operation. Regular oil changes and using the recommended oil grade can help prevent this issue.

Worn-out engine components, such as the bearings, connecting rods, or piston rings, can also cause engine knocking. These parts can become worn over time, leading to excessive play, which can cause the engine to knock during operation. Regular maintenance and prompt repairs can help prevent this issue.

If you hear engine knocking in your Toyota Pixis Space, it is important to have it inspected by a qualified mechanic as soon as possible. Ignoring the issue can lead to serious engine damage, which can be costly to repair. A mechanic can diagnose the cause of the knocking and recommend the necessary repairs to get your vehicle back in good working order.

6.2.2. Hybrid System Issues

The Toyota Pixis Space second-generation model, which was introduced in 2016, features a hybrid powertrain that is designed to improve fuel efficiency and reduce emissions. However, some owners have reported issues with the hybrid system, including reduced power output, difficulty starting the vehicle, and warning lights on the dashboard.

One possible cause of these issues is a faulty battery or battery management system. In some cases, the battery may need to be replaced, while in others, reprogramming the battery management system may be necessary. Other potential causes of hybrid system issues in the Toyota Pixis Space include problems with the electric motor or inverter.

If you experience any problems with your Toyota Pixis Space's hybrid system, it is recommended to bring the vehicle to an authorized Toyota service center for diagnosis and repair. The hybrid system is a complex system that requires specialized training and equipment to diagnose and repair properly.

Regular maintenance, including checking and replacing the hybrid system components as recommended by the manufacturer, can also help prevent issues with the hybrid system. It is important to follow the maintenance schedule outlined in the owner's manual to ensure the vehicle's optimal performance and reliability.

6.2.3. Brake Problems

The Toyota Pixis Space is a popular minivan that has been in production since 2011. The second generation of the vehicle, which was launched in 2016, has been reported to have some brake-related issues. Some owners have reported experiencing a soft or spongy brake pedal, while others have reported that the brakes make a grinding or scraping noise.

One possible cause of soft or spongy brake pedal is a problem with the brake fluid. Over time, brake fluid can become contaminated with moisture, which can cause it to boil and reduce its effectiveness. Another possible cause of a soft brake pedal is air in the brake lines, which can occur if the brake system is not bled properly during maintenance or repair.

The grinding or scraping noise when applying the brakes could be caused by worn brake pads or rotors. When the brake pads wear down, the metal backing plate can come into contact with the rotor, causing the noise. This can also happen if the brake rotors are warped or damaged. It is important to have the brakes inspected and repaired as soon as possible if this noise is heard, as continued driving can lead to more serious damage.

To prevent brake-related issues in the Toyota Pixis Space, it is recommended to follow the manufacturer's recommended maintenance schedule, which includes regular brake inspections and replacing worn brake components. Additionally, it is important to use high-quality brake components and have the brake system bled properly during maintenance or repair. Any unusual noise or feeling in the brake pedal should be addressed promptly to prevent further damage and ensure the safety of the vehicle and its passengers.

7. Troubleshooting by Symptoms

7.1. Check Engine Light

The check engine light is a warning indicator that appears on the dashboard of a Toyota Pixis Space when there is a problem with the vehicle's engine or emissions system. It is a crucial tool for identifying potential issues before they become more severe and expensive to fix.

When the check engine light appears, it is essential to address the issue promptly. One of the most common causes of the check engine light is a malfunctioning oxygen sensor, which is responsible for measuring the amount of oxygen in the exhaust system. If this sensor is faulty, it can cause the engine to run inefficiently, which can lead to decreased fuel economy and increased emissions.

Another possible cause of the check engine light is a faulty catalytic converter. This component is responsible for converting harmful emissions into less harmful gases, and if it fails, it can cause the vehicle to fail emissions tests and can also lead to decreased fuel efficiency.

Other potential causes of the check engine light include a faulty mass airflow sensor, a loose gas cap, or a malfunctioning ignition coil. These issues can cause a variety of symptoms, including decreased performance, rough idling, and reduced fuel economy.

If the check engine light appears, it is essential to have the vehicle diagnosed by a qualified mechanic. They will use specialized equipment to read the vehicle's diagnostic codes, which can provide valuable information about the cause of the problem. Depending on the issue, the mechanic may need to replace a faulty component, clean or repair a damaged part, or perform other repairs to fix the problem.

7.2. Engine Overheating

Engine overheating is a serious issue that can cause damage to your Toyota Pixis Space. If your engine is running hotter than normal or your temperature gauge is in the red zone, you may have an overheating problem. There are several possible causes of engine overheating, including low coolant levels, a malfunctioning thermostat, a leaking or damaged radiator, a broken water pump, or a blown head gasket.

To troubleshoot engine overheating, start by checking the coolant level in your radiator. If it's low, add more coolant to the system and check for leaks. If the coolant level is normal, check the thermostat to make sure it's opening and closing properly. If the thermostat is working correctly, check the radiator for leaks or damage. If you can't find any obvious problems with the coolant system, you may have a problem with the water pump or head gasket, which will require more extensive repairs.

It's important to address engine overheating as soon as possible to prevent further damage to your engine. If you continue to drive your Toyota Pixis Space with an overheating engine, you may cause serious damage that could be expensive to repair. If you're unable to troubleshoot and fix the issue yourself, it's recommended to take your car to a qualified mechanic for diagnosis and repair.

7.3. Unusual Noises

Unusual noises coming from your Toyota Pixis Space can indicate a variety of problems. One common cause is a loose or worn out accessory belt. This can cause a squeaking or chirping noise under the hood, particularly during acceleration or turning. If you hear a knocking or ticking sound, it could be a sign of low engine oil pressure or a problem with the lifters or valves.

Rattling noises can also be an indication of a problem, such as a loose heat shield or exhaust system. If the rattling noise is particularly loud during acceleration, it could be a sign of a failing catalytic converter.

A grinding or scraping noise while braking can be a sign of worn brake pads or rotors. If the noise is particularly loud or accompanied by a vibration, it may be time to have your brake system inspected and repaired.

In some cases, unusual noises can be a sign of a more serious issue, such as a failing transmission or engine. If you are unsure of the source of the noise, it is important to have it inspected by a qualified mechanic to identify and address the problem before it becomes more severe.

7.4. Poor Fuel Efficiency

If you notice that your Toyota Pixis Space is not getting the fuel efficiency it used to, there may be several issues causing the problem. One common cause of poor fuel efficiency is dirty air filters, which can cause the engine to work harder and use more fuel. Another possible cause could be low tire pressure, which can increase the rolling resistance of the car and make the engine work harder.

Additionally, a malfunctioning oxygen sensor can also lead to poor fuel economy, as it can cause the engine to run too rich or too lean. A clogged fuel injector or a failing fuel pump can also cause a decrease in fuel efficiency. Lastly, driving habits and conditions can also play a significant role in fuel economy, such as aggressive driving, excessive idling, and driving in heavy traffic.

To troubleshoot the issue of poor fuel efficiency, you can start by checking your air filters and tire pressure. If those are not the issue, you may need to have your oxygen sensor, fuel injector, or fuel pump checked by a professional mechanic. Finally, it's important to practice good driving habits and maintain your vehicle regularly to ensure optimal fuel efficiency.

7.5. Vibrations and Shaking

Vibrations and shaking are common issues that can occur in any vehicle, including the Toyota Pixis Space. These issues can be caused by various factors, such as worn-out tires, misaligned wheels, damaged suspension components, and more.

One of the first things to check when experiencing vibrations and shaking is the tires. Worn-out tires can cause the vehicle to vibrate, especially at higher speeds. Ensure that the tires are properly inflated and check for any visible signs of wear, such as bald spots, bulges, or cracks. If the tires are worn out, consider replacing them with new ones.

Misaligned wheels can also cause vibrations and shaking in the vehicle. When the wheels are not properly aligned, the tires may wear out unevenly, which can cause vibrations. Get the wheel alignment checked and corrected if necessary.

Damaged suspension components can also cause vibrations and shaking. The suspension system is responsible for absorbing shocks and vibrations, so damaged components can lead to a bumpy ride. Have the suspension system checked by a professional mechanic to identify and replace any damaged components.

Other factors that can contribute to vibrations and shaking include engine issues, transmission problems, and brake problems. If none of the above solutions work, it's best to take the vehicle to a professional mechanic for a thorough diagnosis and repair. Regular maintenance and inspections can also help prevent vibrations and shaking in the future.

8. Common Maintenance Issues

8.1. Battery Maintenance

The battery is an essential component of any vehicle, including the Toyota Pixis Space. It provides power to the starter motor and other electronic systems, such as lights, radio, and air conditioning. Over time, batteries can lose their charge or become damaged, leading to various problems. Therefore, it's important to maintain and monitor the battery regularly.

One of the most common issues with a car battery is a dead battery. A dead battery can occur due to leaving the lights on or not driving the vehicle for an extended period. If you suspect that your battery is dead, you can try jump-starting the vehicle. However, if the battery keeps dying, it's time to get it checked and replaced if necessary.

Another issue with car batteries is corrosion. Corrosion occurs when the battery terminals become dirty and start to rust. If the corrosion is not cleaned regularly, it can prevent the battery from charging correctly, leading to a dead battery. To prevent corrosion, it's recommended to clean the terminals regularly with a mixture of baking soda and water and ensure they are tightly connected.

Extreme temperatures can also affect battery performance. High temperatures can cause the battery to evaporate, leading to low electrolyte levels and ultimately, a dead battery. On the other hand, cold temperatures can reduce the battery's capacity, making it difficult to start the car. Therefore, it's important to monitor the battery's performance during extreme weather conditions and consider using a battery heater or insulator to prevent any issues.

Regular maintenance of the battery can prevent these common issues. It's recommended to check the battery's voltage regularly and clean the terminals to prevent corrosion. If the battery is more than three years old, it's best to get it checked and possibly replaced. By maintaining the battery properly, you can ensure that your Toyota Pixis Space starts and runs smoothly, without any battery-related issues.

8.2. Alternator Replacement

The alternator is an essential component of any vehicle's charging system, including the Toyota Pixis Space. It is responsible for generating electricity and supplying it to the battery and other electrical systems in the car while the engine is running. If the alternator fails or malfunctions, it can lead to a host of issues, including a dead battery, dimming or flickering headlights, electrical system failures, and stalling.

Replacing an alternator can be a daunting task, but it is a necessary one when dealing with a faulty one. Before attempting to replace the alternator, it is important to have a basic understanding of how it works and the steps involved in the replacement process.

One common symptom of a failing alternator is a warning light on the dashboard. If the battery warning light comes on, it may indicate that the alternator is not charging the battery correctly. However, this could also be due to a battery or wiring issue, so it is important to have a professional diagnose the problem before proceeding with the replacement.

To replace the alternator, the first step is to disconnect the battery to prevent electrical shock or damage to the car's electrical systems. Then, remove the drive belt and any other components that may be in the way, such as the air intake or coolant reservoir.

Once the old alternator is removed, the new one can be installed and connected to the car's electrical system. It is important to ensure that all connections are secure and that the drive belt is properly tensioned.

After the new alternator is installed, it is important to test the charging system to ensure that everything is working properly. A multimeter can be used to test the alternator's output voltage and ensure that it is within the manufacturer's specifications.

8.3. Brake Maintenance

Brake maintenance is an important part of keeping your Toyota Pixis Space safe to drive. Regular brake maintenance can help prevent issues such as brake fade, uneven wear, and noisy brakes. One of the most common brake maintenance tasks is replacing the brake pads.

Brake pads are the part of the brake system that press against the brake rotors to slow down the car. Over time, the pads wear down and need to be replaced. Signs that your brake pads may need replacing include squeaking or grinding noises, a vibration when braking, or a longer stopping distance.

In addition to replacing brake pads, it is also important to have the brake system inspected regularly. This can include checking the brake fluid level and brake lines for any signs of leaks or damage. A brake system inspection can help catch potential issues before they become major problems.

Another important aspect of brake maintenance is brake rotor resurfacing or replacement. Over time, brake rotors can become warped or worn, leading to uneven braking or vibration when braking. Resurfacing the rotors involves removing a small amount of material to create a smooth, even surface. In some cases, the rotors may need to be replaced if they are too worn or damaged.

Regular brake maintenance can help ensure that your Toyota Pixis Space is safe to drive and prevent expensive repairs down the line. Be sure to follow your vehicle’s recommended maintenance schedule and have any brake issues addressed promptly by a qualified technician.

8.4. Wheel Alignment

Wheel alignment is an essential part of vehicle maintenance that helps ensure a smooth and safe driving experience for the Toyota Pixis Space. Proper wheel alignment involves adjusting the angles of the wheels so that they are parallel to each other and perpendicular to the ground. Over time, the wheels on a car can become misaligned due to various factors such as driving over potholes or hitting curbs.

One of the most common symptoms of misaligned wheels is uneven tire wear. When the wheels are not aligned properly, the tires can wear out more quickly on certain parts of the tread than others. This can lead to reduced traction and handling, as well as increased risk of blowouts or flats.

Other signs of misaligned wheels may include pulling to one side while driving, steering wheel vibration, and a crooked steering wheel when driving straight. Misaligned wheels can also lead to decreased fuel efficiency and increased wear and tear on the suspension components.

To prevent these issues and ensure optimal driving performance, it is recommended to have the wheel alignment checked at least once a year or whenever the vehicle undergoes major repairs or suspension work. A qualified mechanic can perform a wheel alignment using specialized equipment to adjust the camber, caster, and toe angles of the wheels.

Regular wheel alignments can help extend the life of the tires and suspension components, improve handling and steering, and increase fuel efficiency. It is a relatively simple and cost-effective maintenance task that can help keep the Toyota Pixis Space running smoothly and safely on the road.

8.5. Fuel System Cleaning

Fuel system cleaning is an essential maintenance procedure that is often overlooked by vehicle owners. Over time, the fuel system in the Toyota Pixis Space can become clogged with dirt, debris, and other contaminants. This can cause a reduction in fuel efficiency and performance, and in severe cases, it can even lead to engine damage.

To avoid these issues, it is recommended that the fuel system is cleaned periodically. The frequency of cleaning will depend on various factors such as the age of the vehicle, the type of fuel used, and the driving conditions.

There are several methods to clean the fuel system, including using fuel additives, fuel injection cleaning, and fuel tank cleaning. Fuel additives are the most common method of fuel system cleaning and are usually added to the fuel tank. They work by breaking down deposits and other contaminants, allowing them to be burned off during normal engine operation.

Fuel injection cleaning involves the use of specialized equipment to clean the fuel injectors, throttle body, and other components of the fuel system. This method is more effective than fuel additives and can help restore the engine's performance and fuel efficiency.

Fuel tank cleaning is the most invasive method of fuel system cleaning and involves the removal of the fuel tank and cleaning of the tank and its components. This method is usually only necessary in extreme cases where the fuel system is severely clogged or contaminated.

Regular fuel system cleaning can help maintain the performance and reliability of the Toyota Pixis Space, and prevent costly repairs down the line. It is important to consult with a qualified mechanic to determine the best method and frequency of fuel system cleaning for your vehicle.

9. Common DIY Fixes for Toyota Pixis Space

9.1. Replacing Air Filters

Replacing air filters is a common DIY fix for the Toyota Pixis Space. Air filters are an essential part of a car's engine system, as they prevent dirt, debris, and other contaminants from entering the engine. Over time, air filters can become clogged and dirty, reducing their effectiveness and causing a decrease in engine performance.

Fortunately, replacing the air filter in a Toyota Pixis Space is a relatively simple task that can be done at home with just a few basic tools. First, locate the air filter housing under the hood of the car. It is usually a large plastic box with a hose leading into the engine.

Next, remove the cover of the air filter housing by unclipping the latches or unscrewing the screws that hold it in place. Once the cover is removed, the old air filter can be lifted out of the housing. Be sure to take note of the direction in which the filter is installed before removing it, so that the new filter can be installed correctly.

Before installing the new air filter, inspect the housing for any dirt or debris and clean it out if necessary. Then, insert the new filter into the housing, making sure it is installed in the correct direction. Finally, replace the cover of the air filter housing and secure it in place with the latches or screws.

Replacing the air filter in a Toyota Pixis Space on a regular basis can help to maintain engine performance and improve fuel efficiency. It is generally recommended to replace the air filter every 10,000 to 15,000 miles, although this may vary depending on driving conditions. Regular maintenance of the air filter can also help to extend the life of the car's engine.

9.2. Changing Oil and Oil Filter

Regular oil changes are an essential part of maintaining the performance and longevity of your Toyota Pixis Space. As the oil lubricates the engine's moving parts, it also collects debris and contaminants that can cause damage over time. Changing the oil and oil filter regularly can help keep the engine clean and running smoothly.

To change the oil and oil filter in your Toyota Pixis Space, you'll need a few tools and supplies, including a socket wrench, oil filter wrench, oil drain pan, new oil filter, and the correct type and amount of oil for your engine.

First, locate the oil drain plug under the car and place the drain pan beneath it. Use the socket wrench to loosen the plug and drain the old oil into the pan. Be sure to dispose of the used oil properly.

Next, use the oil filter wrench to remove the old oil filter, being careful not to spill any oil. Wipe the area clean where the filter was mounted, and then install the new oil filter, being sure to tighten it securely.

Refill the engine with the recommended amount and type of oil, which can be found in your owner's manual or on the oil cap under the hood. Once you've added the oil, start the engine and let it run for a minute or two, checking for any leaks or issues.

Changing your oil and oil filter regularly can help keep your Toyota Pixis Space running smoothly and prevent costly engine damage down the line. If you're not comfortable doing this maintenance yourself, a mechanic or auto shop can perform the service for you.

9.3. Replacing Brake Pads

Replacing the brake pads in your Toyota Pixis Space is a common DIY fix that you can easily perform at home with the right tools and some basic knowledge. The brake pads are an essential part of your car's braking system, and they must be replaced regularly to ensure your safety on the road.

To begin the process of replacing your brake pads, you will need to remove the wheel from the brake assembly. Once you have removed the wheel, you will need to use a brake piston compressor tool to push the piston back into the brake caliper. This will allow you to remove the old brake pads and replace them with new ones.

When selecting new brake pads, it is essential to choose pads that are compatible with your vehicle's make and model. Some brake pads may be better suited to certain driving conditions, so be sure to do your research and choose pads that are appropriate for your needs.

After you have replaced the brake pads, it is important to break them in properly. This involves driving your car at moderate speeds and gradually applying the brakes until the new pads have been properly bedded in.

While replacing the brake pads is a relatively simple process, it is essential to take the time to do it correctly. If you are uncomfortable performing this task yourself, it is always best to seek the assistance of a professional mechanic. With proper care and maintenance, your Toyota Pixis Space's braking system will remain in top condition for years to come.

9.4. Checking Tire Pressure

Regularly checking tire pressure is an important part of maintaining a Toyota Pixis Space. Proper tire pressure can affect fuel efficiency, handling, and overall safety.

To check the tire pressure, start by checking the recommended tire pressure for the vehicle in the owner's manual or on the tire information placard located on the driver's side door jamb. Using a tire pressure gauge, remove the valve cap from each tire and press the gauge onto the valve stem to get a reading. Compare the reading to the recommended tire pressure and adjust as necessary using an air compressor or by letting air out of the tire with the valve stem tool.

It's important to check tire pressure when the tires are cold, as heat from driving can cause the pressure to increase and give an inaccurate reading. It's also a good idea to check the tire pressure at least once a month and before long trips.

In addition to checking tire pressure, it's also a good idea to inspect the tires for any signs of damage or wear, such as cracks, bulges, or uneven tread wear. If any issues are found, it may be necessary to have the tires repaired or replaced.

Maintaining proper tire pressure and inspecting the tires regularly can help keep the Toyota Pixis Space running smoothly and safely on the road.

9.5. Replacing Spark Plugs

Spark plugs play a vital role in the combustion process of an engine. They are responsible for igniting the fuel mixture inside the engine's cylinders. Over time, spark plugs can wear out, causing poor engine performance, misfires, and reduced fuel efficiency. As a result, it is essential to replace them periodically to maintain the vehicle's optimal performance, including the Toyota Pixis Space.

The Toyota Pixis Space's spark plugs need to be replaced after every 30,000 to 60,000 miles, depending on the manufacturer's recommendations. Replacing spark plugs is a relatively easy DIY fix that requires only a few basic tools and the correct replacement parts.

To replace the spark plugs in a Toyota Pixis Space, the first step is to locate the spark plug wires or coil packs. Next, remove the old spark plug using a socket wrench and replace it with the new one, being careful not to overtighten it. Finally, reconnect the spark plug wire or coil pack, and repeat the process for the remaining spark plugs.

It is crucial to use the correct type of spark plug recommended by the vehicle's manufacturer to ensure optimal performance and prevent any engine damage. It is also advisable to replace all spark plugs at once, even if only one appears to be worn out. This practice ensures that the engine continues to perform uniformly, preventing any issues with engine misfires and reduced fuel efficiency.

Overall, replacing the spark plugs in a Toyota Pixis Space is a relatively easy and inexpensive DIY fix that can help maintain the vehicle's performance and fuel efficiency.

10. Warranty and Recall Information

10.1. Toyota Pixis Space Recalls

Toyota Pixis Space is a popular mini passenger van that has been on the market for several years. Like any other vehicle, it has experienced a few recalls due to various issues. One of the recalls that affected Toyota Pixis Space was in 2019, where the car maker recalled thousands of vehicles due to a faulty fuel pump. This recall affected several Toyota models, including the Pixis Space.

The faulty fuel pump was found to have a defective impeller that could cause the fuel pump to stop working. This issue could lead to the engine stalling while driving, increasing the risk of an accident. Toyota announced that they would replace the fuel pump at no cost to the owners.

Another recall that affected the Toyota Pixis Space was in 2020, where the car maker recalled several vehicles due to an airbag issue. The recall was due to a faulty airbag control unit that could cause the airbags to fail in the event of an accident. This issue could lead to serious injuries or even death in the worst-case scenario. Toyota announced that they would replace the faulty airbag control unit at no cost to the owners.

It is important to note that if your Toyota Pixis Space is affected by a recall, you should take it to a Toyota dealership as soon as possible to have the issue fixed. Toyota dealerships will typically fix the problem free of charge, and the process is usually quick and easy. To find out if your Toyota Pixis Space is affected by any recalls, you can check the official Toyota website or contact your local Toyota dealership.

10.2. Toyota Pixis Space Warranty Coverage

Toyota offers a comprehensive warranty package for the Pixis Space, providing coverage for various components and systems of the vehicle. The basic warranty coverage for the Pixis Space is for three years or 100,000 kilometers, whichever comes first. This includes coverage for the engine, transmission, and other parts of the powertrain. Additionally, the vehicle also comes with a five-year or 150,000-kilometer warranty for the hybrid battery and components.

Toyota also provides a warranty for the Pixis Space's body and paint, which covers defects in materials and workmanship for a period of three years or 100,000 kilometers. The warranty also covers perforation caused by corrosion for five years with no distance limit.

In addition to the standard warranty coverage, Toyota also offers extended warranties for the Pixis Space that can provide additional coverage beyond the basic warranty period. These extended warranties can be purchased at the time of vehicle purchase or anytime before the basic warranty expires.

It's important to note that warranty coverage may vary depending on the market and region where the vehicle was purchased. It's recommended to check with your local Toyota dealer or service center to obtain detailed information on the warranty coverage for your specific Pixis Space model.

11. Safety Issues with Toyota Pixis Space

11.1. Airbag Issues

The Toyota Pixis Space is a compact car that comes with an array of safety features, including airbags. However, some models of the Toyota Pixis Space have been found to have airbag issues that can cause serious safety concerns.

One of the most common airbag issues with the Toyota Pixis Space is related to the Takata airbag recall. This recall affects millions of vehicles worldwide and is due to a defect in the airbag inflator that can cause the airbag to rupture during deployment. If the airbag ruptures, metal shrapnel can be ejected into the cabin, causing serious injuries or even death.

To check if your Toyota Pixis Space is affected by the Takata airbag recall, you can enter your car's Vehicle Identification Number (VIN) on the Toyota website or the National Highway Traffic Safety Administration (NHTSA) website.

In addition to the Takata airbag recall, some Toyota Pixis Space models have also been subject to recalls related to the airbag system. For example, in 2018, Toyota announced a recall of certain Toyota Pixis Space models due to a defect in the airbag sensor. According to the recall notice, the airbag sensor may malfunction and cause the airbag warning light to illuminate or not work properly during an accident. This issue can increase the risk of injury in the event of a crash.

If you own a Toyota Pixis Space and are concerned about airbag issues, it is important to check if your car is affected by any recalls or safety issues. You can check for recalls on the Toyota website or the NHTSA website, or contact your local Toyota dealer for more information. It is also important to follow all recommended maintenance and safety procedures to help ensure the safe operation of your vehicle.

11.2. Brake Failure

Brake failure is a significant safety issue that can occur in any vehicle, including the Toyota Pixis Space. The braking system is critical in preventing accidents and ensuring the safety of the driver and passengers. A brake failure can occur due to several reasons, including worn brake pads, damaged brake lines, or malfunctioning brake components.

One of the signs of brake failure in the Toyota Pixis Space is a soft or spongy brake pedal. This occurs when the brake pedal is pressed, and it goes all the way down to the floor without much resistance. Another sign is a vibrating or pulsating brake pedal, indicating warped brake rotors or drums. If the brake warning light on the dashboard comes on or if there is a grinding noise when the brakes are applied, it is essential to get the brake system checked immediately.

Regular brake maintenance is crucial to prevent brake failure. It is recommended to have the brakes checked at least once a year or every 12,000 miles. The brake pads should be inspected for wear and replaced if they are worn out. The brake fluid should also be checked and replaced if necessary.

If brake failure occurs while driving, the driver should remain calm and try to use the emergency brake to stop the vehicle. The emergency brake is a separate system and can help slow down the car. Once the vehicle has stopped, it is essential to call for assistance and have the brake system inspected by a professional.

It is crucial to address any brake issues immediately to ensure the safety of the driver and passengers. Regular brake maintenance and inspections can help prevent brake failure and ensure that the braking system is functioning correctly.

11.3. Seatbelt Problems

Seatbelts are an essential safety feature in any vehicle, including the Toyota Pixis Space. However, like any other part of a car, seatbelts can also experience problems that may put the safety of passengers at risk. Some of the common seatbelt issues that may affect the Toyota Pixis Space include frayed or cut seatbelt straps, damaged buckles, and malfunctioning retractors.

Frayed or cut seatbelt straps may occur due to regular wear and tear or a manufacturing defect. Such damage may compromise the strength and effectiveness of the seatbelt, increasing the risk of injury in case of an accident. On the other hand, a damaged buckle may not lock correctly, making it difficult for occupants to secure themselves properly. Malfunctioning retractors, on the other hand, may prevent the seatbelt from extending or retracting, making it difficult to fasten.

To ensure the safety of occupants, it is essential to address any seatbelt problems as soon as possible. Toyota may issue a recall to address any seatbelt problems that arise due to manufacturing defects. If a recall is issued, affected vehicle owners will receive a notification letter from Toyota, and the repair or replacement of the affected parts will be done at no cost to the owner.

If the seatbelt issues are not related to a recall, it is recommended that the owner takes the vehicle to a Toyota service center for inspection and repair. It is essential to have a certified technician inspect and repair the seatbelt system as it involves critical safety components that require specific expertise to handle.

11.4. Electrical Issues

The Toyota Pixis Space is known for its reliability and durability, but like any vehicle, it can experience electrical issues. One of the most common electrical issues in the Pixis Space is a faulty alternator, which can lead to a dead battery and difficulty starting the engine. Other common electrical issues include problems with the starter motor, ignition switch, and wiring. These issues can cause intermittent starting problems or a complete failure to start.

Another common electrical issue with the Pixis Space is a malfunctioning power window system. This can be caused by a faulty power window switch, a broken window regulator, or damaged wiring. When the power windows fail, it can be frustrating and even dangerous if the windows are stuck in the open position.

Additionally, some owners have reported issues with the dashboard lights and gauges not working properly. This can make it difficult to monitor the vehicle's speed, fuel level, and other important information while driving. In some cases, the issue is caused by a faulty instrument cluster, which may need to be replaced.

Electrical issues in any vehicle can be tricky to diagnose and repair, so it's important to take your Toyota Pixis Space to a qualified mechanic if you suspect an electrical issue. Ignoring the problem could lead to more serious issues or even safety hazards.

11.5. Structural Defects

Toyota Pixis Space is a popular kei car produced by Toyota Motor Corporation. While it is generally considered to be a reliable and safe vehicle, there have been some reports of structural defects. These defects can pose serious safety risks to drivers and passengers.

One common issue reported by Toyota Pixis Space owners is a defect in the vehicle's body structure. This defect can cause the car to become unstable at high speeds or during sudden maneuvers, increasing the risk of a rollover or other serious accident. Some drivers have reported feeling a wobbling or shaking sensation while driving, which can be a sign of a structural defect.

Another potential safety issue with the Toyota Pixis Space is related to the vehicle's roof strength. In some cases, the roof of the car may not be strong enough to withstand the force of a rollover or other impact, which can result in serious or even fatal injuries to occupants. This is especially concerning for drivers and passengers who live in areas with high rates of severe weather, such as tornadoes or hurricanes.

In response to these safety concerns, Toyota has issued a number of recalls for the Pixis Space. These recalls have addressed a range of issues, including problems with the vehicle's steering, brakes, airbags, and more. However, it is important for Toyota Pixis Space owners to stay informed about any new safety issues that may arise and to take prompt action if necessary to ensure their safety and the safety of others on the road.

12. Final Thoughts

12.1. Summary of Common Issues and Solutions

The Toyota Pixis Space is a reliable vehicle, but like any car, it may encounter common issues that need maintenance and repairs. Some of the most common issues with the Toyota Pixis Space include brake maintenance, wheel alignment, fuel system cleaning, replacing air filters, changing oil and oil filters, replacing brake pads, and checking tire pressure. These issues can be addressed through regular maintenance and DIY fixes.

In addition to common maintenance issues, there are also safety concerns with the Toyota Pixis Space, such as airbag issues, brake failure, seatbelt problems, electrical issues, and structural defects. These safety issues should be taken seriously and addressed immediately to ensure the safety of the driver and passengers.

It is important for Toyota Pixis Space owners to stay up-to-date with warranty and recall information. Toyota offers a warranty on its vehicles, which includes coverage for certain components and systems. It is also essential to stay informed about any recalls or safety issues related to the vehicle.

12.2. Importance of Regular Maintenance and Inspection

Regular maintenance and inspection of a vehicle like the Toyota Pixis Space is crucial for its longevity and safe operation. By keeping up with routine maintenance tasks such as oil changes, brake pad replacements, and tire rotations, you can prevent larger, more expensive problems down the line.

In addition to routine maintenance, it's important to have your Toyota Pixis Space inspected regularly to identify potential issues before they become major problems. This includes checking for fluid leaks, worn brake pads, and tire wear. Regular inspections can also help detect issues with the suspension or steering components, which can affect the vehicle's handling and stability.

Ignoring routine maintenance and inspections can result in serious safety issues. For example, failing to replace worn brake pads can lead to brake failure, while ignoring tire pressure can lead to blowouts or poor handling. Neglecting to replace air filters can lead to reduced engine performance and lower fuel efficiency.

Overall, staying on top of regular maintenance and inspections is key to ensuring the safety and reliability of your Toyota Pixis Space. By taking a proactive approach to vehicle maintenance, you can help extend the life of your car and enjoy worry-free driving for years to come.

12.3. Importance of Professional Diagnosis and Repair

Regular maintenance and DIY fixes can go a long way in keeping your Toyota Pixis Space running smoothly, but there may come a time when a professional diagnosis and repair are necessary. This is especially true if you are experiencing complex issues or if you are unsure of the underlying cause of a problem.

Professional diagnosis and repair can help ensure that the issue is correctly identified and fixed the first time, avoiding potentially costly and time-consuming trial and error attempts at repair. Experienced mechanics have the knowledge, tools, and expertise to diagnose and repair issues efficiently and effectively, minimizing downtime for your vehicle.

Furthermore, repairs completed by a certified technician may come with a warranty, providing additional peace of mind that the work performed is of high quality and will last. Plus, it can help maintain the resale value of your Toyota Pixis Space, as prospective buyers will likely appreciate a well-documented repair history completed by trained professionals.

Overall, while regular maintenance and DIY fixes are important for keeping your Toyota Pixis Space in top shape, professional diagnosis and repair may be necessary for more complex issues. It is essential to prioritize the health and safety of yourself and your passengers by addressing any issues as soon as possible and seeking out the expertise of a qualified mechanic when needed.

12.4. Tips for Keeping Your Toyota Pixis Space Running Smoothly

To keep your Toyota Pixis Space running smoothly, it is important to follow a few tips. Firstly, make sure to follow the recommended maintenance schedule provided in your owner's manual. Regularly changing the oil and other fluids, replacing filters and spark plugs, and inspecting the brakes and tires can help prevent major issues down the line.

It is also important to pay attention to any warning signs that may indicate a problem with your vehicle. Strange noises, smells, or vibrations should be addressed as soon as possible to avoid further damage.

In addition to regular maintenance, it is important to take care of your Toyota Pixis Space on a daily basis. Avoid harsh driving conditions such as excessive idling, harsh acceleration and braking, and overloading the vehicle beyond its recommended capacity.

Finally, consider investing in high-quality parts and components for your vehicle. While cheaper options may seem tempting, they may not provide the same level of performance and durability as genuine Toyota parts.

By following these tips and taking good care of your Toyota Pixis Space, you can help ensure that it runs smoothly for many years to come.

Example List of toyota pixis space Engine Error Codes and Descriptions

FAQ: Common Safety and Maintenance Issues with Toyota Pixis Space

• Do you have problems with car?
• Write a Review