Common Issues with Mazda Ford Ixion - Year, Model, and Engine-Specific Problems
By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on September 24, 20232. Common issues by year range
2.1. 2000-2005
2.2. 2006-2010
2.3. 2011-2015
3. Model-specific issues
3.1. Mazda Ford Ixion hatchback
3.2. Mazda Ford Ixion sedan
3.3. Mazda Ford Ixion wagon
4. Engine-specific issues
4.1. 1.6L Zetec-SE engine
4.2. 2.0L Duratec engine
4.3. 2.3L Duratec engine
5. Conclusion
Frequently Asked Questions (FAQ) for Mazda Ford Ixion Issues
1. Introduction
The Mazda Ford Ixion was a collaboration between two of the world's most renowned car manufacturers, Mazda and Ford. It was produced in the early 2000s and was available in different models and trim levels such as the hatchback, sedan, and wagon. The Mazda Ford Ixion was equipped with different types of engines, ranging from the 1.6L Zetec-SE engine to the 2.3L Duratec engine, depending on the model and year.Like any other car, the Mazda Ford Ixion was prone to issues and problems that could range from minor to major. Common problems that were reported with the Mazda Ford Ixion included engine overheating, transmission failure, suspension problems, electrical issues, and brake system problems. These problems were usually caused by faulty components or normal wear and tear.
In terms of model-specific issues, the Mazda Ford Ixion hatchback was known to have rear door latch failures, while the fuel tank vent valve caused fuel odors and leaks. The sedan model was known to have transmission shifting issues, and the wagon had problems with the ignition coil and power steering pump.
Different engine types had their own sets of problems as well. The 1.6L Zetec-SE engine had timing belt tensioner failure and oil leaks, while the 2.0L Duratec engine had water pump and crankshaft position sensor failures. The 2.3L Duratec engine was known to have variable valve timing solenoid and ignition coil failures.
It's important to note that regular car maintenance and inspections are crucial to prevent or catch car problems early on. Seeking professional help for more serious car issues is also recommended.
In conclusion, the Mazda Ford Ixion was a collaborative effort between Mazda and Ford, and like any other car, it had its fair share of problems and issues. Identifying these problems early on and seeking professional help can save time, money, and potentially prevent accidents.
2. Common issues by year range
2.1. 2000-2005
From 2000 to 2005, the Mazda Ford Ixion was known to have a number of common issues that affected many of its models. One of the most common issues during this time period was engine overheating caused by a faulty thermostat. When the thermostat fails, it can cause the engine to overheat, which can lead to serious engine damage if not addressed promptly.Another common issue during this time period was transmission failure caused by fluid leaks. The transmission system relies on fluid to operate properly, and if there is a leak, it can cause the transmission to fail. This issue was reported in multiple models of the Mazda Ford Ixion, including the hatchback, sedan, and wagon.
Suspension problems leading to uneven tire wear were also reported during this time period. The suspension system is responsible for providing a smooth ride and keeping the vehicle stable while driving, so any issues with this system can cause problems with the car's handling and safety.
Other common issues during this time period included electrical issues with the power windows and locks, which could cause these systems to malfunction or stop working altogether. Brake system problems were also reported, which could lead to a loss of stopping power and potentially dangerous situations on the road.
To address these issues, it's important to conduct regular maintenance and inspections of the car, including checking the fluid levels, replacing worn or damaged components, and addressing any warning signs or unusual behavior from the car. Seeking professional help for more serious issues is also recommended.
2.2. 2006-2010
Between 2006 and 2010, the Mazda Ford Ixion continued to have a number of common issues that affected many of its models. One of the most common issues during this time period was transmission failure caused by faulty transmission solenoids. The solenoids are responsible for controlling the flow of fluid in the transmission, and when they fail, it can cause the transmission to slip or stop working altogether.Another common issue during this time period was power steering pump failure, which can cause a loss of power steering assist while driving. This issue was reported in multiple models of the Mazda Ford Ixion, including the hatchback, sedan, and wagon.
Electrical issues continued to be a problem during this time period as well. One of the most common electrical issues reported was the failure of the electronic control module (ECM), which is responsible for controlling various systems in the car. When the ECM fails, it can cause a wide range of problems, including engine stalling and starting issues.
Brake system problems also continued to be reported during this time period, including brake pad wear and uneven brake rotor wear. These issues can lead to reduced braking performance and potentially dangerous situations on the road.
To address these issues, it's important to conduct regular maintenance and inspections of the car, including checking the fluid levels, replacing worn or damaged components, and addressing any warning signs or unusual behavior from the car. Seeking professional help for more serious issues is also recommended. Additionally, staying up-to-date with any recalls or service bulletins related to the Mazda Ford Ixion can help prevent or address known issues with the car.
2.3. 2011-2015
Between 2011 and 2015, the Mazda Ford Ixion continued to experience a number of common issues that affected many of its models. One of the most commonly reported issues during this time period was engine misfires caused by faulty ignition coils. The ignition coils are responsible for providing the spark that ignites the fuel in the engine, and when they fail, it can cause the engine to misfire and run poorly.Another common issue during this time period was the failure of the air conditioning compressor, which can cause a loss of cold air and a decrease in the effectiveness of the air conditioning system. This issue was reported in multiple models of the Mazda Ford Ixion, including the hatchback, sedan, and wagon.
Electrical issues continued to be a problem during this time period as well, with many owners reporting issues with the car's audio system and dashboard display. In some cases, these issues were caused by faulty wiring or connectors, while in other cases, they were caused by issues with the audio unit itself.
Brake system problems also continued to be reported during this time period, with many owners experiencing issues with brake pad wear and brake rotor warping. These issues can lead to reduced braking performance and potentially dangerous situations on the road.
To address these issues, it's important to conduct regular maintenance and inspections of the car, including checking the ignition system, replacing worn or damaged components, and addressing any warning signs or unusual behavior from the car. Seeking professional help for more serious issues is also recommended. Additionally, staying up-to-date with any recalls or service bulletins related to the Mazda Ford Ixion can help prevent or address known issues with the car.
3. Model-specific issues
3.1. Mazda Ford Ixion hatchback
The Mazda Ford Ixion hatchback is a popular model that has had its fair share of issues over the years. One of the most common issues reported by owners of this model is with the suspension system. The hatchback's suspension can be prone to issues such as worn-out shocks or struts, which can cause a rough ride and reduced handling. This can also lead to premature wear and tear on other components of the car, such as the tires.Another issue that has been reported with the Mazda Ford Ixion hatchback is with the transmission system. Some owners have reported issues with rough shifting, transmission slippage, and even complete transmission failure. This can be a costly repair, and in some cases, it may require a complete replacement of the transmission.
The hatchback's electrical system has also been a cause for concern, with some owners reporting issues with the car's audio system, dashboard display, and other electronic components. These issues can be caused by faulty wiring, connectors, or issues with the audio unit itself.
Another issue that has been reported with the Mazda Ford Ixion hatchback is with the fuel system. Some owners have reported issues with fuel leaks, which can be a serious safety hazard. This can be caused by a faulty fuel pump, fuel line, or fuel tank, and should be addressed immediately.
To address these issues with the Mazda Ford Ixion hatchback, regular maintenance and inspections are important, as well as addressing any warning signs or unusual behavior from the car. It's also recommended to seek professional help for more serious issues, such as transmission failure or fuel leaks. Staying up-to-date with any recalls or service bulletins related to the Mazda Ford Ixion hatchback can also help prevent or address known issues with the car.
3.2. Mazda Ford Ixion sedan
The Mazda Ford Ixion sedan is another popular model that has its own set of model-specific issues. One of the most common issues reported with this sedan is with the engine. Some owners have reported issues with the engine misfiring or stalling, which can be caused by a variety of factors such as a faulty ignition coil or spark plug.Another issue that has been reported with the Mazda Ford Ixion sedan is with the brakes. Some owners have reported issues with the brakes, such as brake squeaking or grinding noises. This can be caused by worn brake pads or rotors, which should be replaced as soon as possible to prevent further damage.
The sedan's air conditioning system has also been a source of concern, with some owners reporting issues with the air conditioner not blowing cold air or not working at all. This can be caused by a variety of factors such as a faulty compressor or refrigerant leak.
Another issue that has been reported with the Mazda Ford Ixion sedan is with the power windows. Some owners have reported issues with the power windows not functioning properly, which can be caused by a faulty window motor or switch.
To address these issues with the Mazda Ford Ixion sedan, regular maintenance and inspections are important, as well as addressing any warning signs or unusual behavior from the car. It's also recommended to seek professional help for more serious issues, such as engine or brake problems. Staying up-to-date with any recalls or service bulletins related to the Mazda Ford Ixion sedan can also help prevent or address known issues with the car.
3.3. Mazda Ford Ixion wagon
The Mazda Ford Ixion wagon is another popular model that has its own set of model-specific issues. One of the most common issues reported with this wagon is with the suspension system. Some owners have reported issues with the suspension, such as excessive bouncing or uneven tire wear, which can be caused by worn out shocks or struts.Another issue that has been reported with the Mazda Ford Ixion wagon is with the transmission. Some owners have reported issues with the transmission, such as slipping or jerking during gear changes. This can be caused by a variety of factors such as a low transmission fluid level or a worn-out transmission.
The wagon's electrical system has also been a source of concern, with some owners reporting issues with the electrical components such as the dashboard lights or the radio. This can be caused by a faulty battery or a problem with the wiring.
Another issue that has been reported with the Mazda Ford Ixion wagon is with the fuel system. Some owners have reported issues with the fuel system, such as difficulty starting the car or reduced fuel efficiency. This can be caused by a clogged fuel filter or a faulty fuel pump.
To address these issues with the Mazda Ford Ixion wagon, regular maintenance and inspections are important, as well as addressing any warning signs or unusual behavior from the car. It's also recommended to seek professional help for more serious issues, such as transmission or suspension problems. Staying up-to-date with any recalls or service bulletins related to the Mazda Ford Ixion wagon can also help prevent or address known issues with the car.
4. Engine-specific issues
4.1. 1.6L Zetec-SE engine
The Mazda Ford Ixion is equipped with various types of engines, including the 1.6L Zetec-SE engine, which is known for its reliability and fuel efficiency. However, like any engine, it can experience specific issues.One common issue reported with the 1.6L Zetec-SE engine is with the timing belt. The timing belt is a crucial component that keeps the engine's pistons and valves in sync. Over time, the timing belt can wear out, stretch, or snap, which can cause significant engine damage. To prevent this issue, it's recommended to have the timing belt replaced at the manufacturer-recommended intervals.
Another issue reported with the 1.6L Zetec-SE engine is with the cooling system. Some owners have reported overheating issues, which can be caused by a variety of factors such as a malfunctioning radiator or a faulty water pump. Regular maintenance and inspections of the cooling system can help prevent this issue.
The engine's fuel system has also been a source of concern, with some owners reporting issues with fuel injectors or the fuel pressure regulator. This can cause issues such as reduced fuel efficiency or difficulty starting the engine. Regular maintenance, such as fuel system cleanings, can help prevent this issue.
In addition, the 1.6L Zetec-SE engine may also experience issues with the exhaust system. This can cause issues such as reduced engine performance or increased emissions. Regular inspections and maintenance of the exhaust system can help prevent this issue.
Overall, the 1.6L Zetec-SE engine is known for its reliability and fuel efficiency, but regular maintenance and inspections are essential to prevent any potential issues. Staying up-to-date with any recalls or service bulletins related to the engine can also help prevent or address known issues with the car.
4.2. 2.0L Duratec engine
The Mazda Ford Ixion was also available with the 2.0L Duratec engine, which had its own set of issues. One common problem reported by owners of this engine is a ticking or rattling noise, which may be caused by a faulty timing chain tensioner or worn timing chain guides. This issue can be addressed by replacing the timing chain tensioner and guides.Another issue with the 2.0L Duratec engine is oil consumption. Some owners have reported that their engines consume a significant amount of oil between oil changes. This can be caused by a variety of factors, including worn piston rings or valve guides, or even a faulty PCV valve. Addressing this issue may require a rebuild of the engine or replacement of the faulty components.
Finally, some owners have reported issues with the electronic throttle control system on the 2.0L Duratec engine. Symptoms of this issue may include a rough idle or hesitation during acceleration. This problem can be caused by a faulty throttle body or accelerator pedal position sensor, and may require replacement of these components to address the issue.
4.3. 2.3L Duratec engine
The Mazda Ford Ixion was also available with the 2.3L Duratec engine, which had its own set of issues. One of the most commonly reported issues with this engine is a rough or unstable idle, which may be caused by a faulty idle air control valve or dirty throttle body. Cleaning or replacing these components can usually resolve the issue.Another issue reported by some owners is a hesitation or stumble during acceleration. This can be caused by a variety of factors, including a faulty fuel pump or fuel injector, a clogged fuel filter, or even a faulty mass airflow sensor. Addressing this issue may require a thorough inspection of the fuel system and replacement of any faulty components.
Finally, some owners have reported issues with the timing chain on the 2.3L Duratec engine. Symptoms of a faulty timing chain may include a rattling or grinding noise coming from the engine, especially at low speeds. This issue can be addressed by replacing the timing chain and related components, such as the tensioner and guides. It's important to address this issue as soon as possible to avoid potential engine damage.
5. Conclusion
In conclusion, the Mazda Ford Ixion is a compact car that has had its fair share of issues over the years. Common problems include transmission issues, suspension problems, and engine failures. These problems tend to vary by year range, model, and engine type. It is important to stay on top of regular maintenance and address any issues as soon as they arise to prevent further damage to the vehicle. As with any car, it is recommended to consult with a qualified mechanic for any necessary repairs or maintenance. By being proactive and staying informed about potential issues, owners of the Mazda Ford Ixion can keep their cars running smoothly and reliably for years to come.Frequently Asked Questions (FAQ) for Mazda Ford Ixion Issues
What are some common issues with the Mazda Ford Ixion produced between 2000-2005?
What are some model-specific issues with the Mazda Ford Ixion hatchback?
What are some common engine-specific issues with the Mazda Ford Ixion's 1.6L Zetec-SE engine?
What are some common issues with the Mazda Ford Ixion produced between 2006-2010?
Are there any known issues with the Mazda Ford Ixion's 2.0L Duratec engine?
What are some model-specific issues with the Mazda Ford Ixion wagon?
What are some common issues with the Mazda Ford Ixion produced between 2011-2015?
What are some common engine-specific issues with the Mazda Ford Ixion's 2.3L Duratec engine?
What are some common problems with the Mazda Ford Ixion 2.0L Duratec engine?
Are there any common problems with the Mazda Ford Ixion suspension system?
What should I do if my Mazda Ford Ixion is experiencing transmission issues?
What are some common electrical issues with the Mazda Ford Ixion?
Are there any recalls or known defects for the Mazda Ford Ixion?
What are some common transmission issues for the Mazda Ford Ixion?
What should I do if I notice oil leaks in my Mazda Ford Ixion?
What are some common electrical issues for the Mazda Ford Ixion?
How often should I have the brakes on my Mazda Ford Ixion checked?
What are some common suspension issues for the Mazda Ford Ixion?
What should I do if I notice unusual engine noises in my Mazda Ford Ixion?
What is the recommended maintenance schedule for the Mazda Ford Ixion?
Are there any recalls for the Mazda Ford Ixion?
Are there any common problems with the Mazda Ford Ixion hatchback model?
Are there any known issues with the Mazda Ford Ixion sedan model?
Are there any model-specific issues with the Mazda Ford Ixion wagon?
What are some common issues with the 1.6L Zetec-SE engine in the Mazda Ford Ixion?
What are some common problems with the 2.0L Duratec engine in the Mazda Ford Ixion?
Are there any known issues with the 2.3L Duratec engine in the Mazda Ford Ixion?
What are the common engine issues in the Mazda Ford Ixion?
What are the transmission problems that occur in the Mazda Ford Ixion?
How can I prevent issues in my Mazda Ford Ixion?
What should I do if my Mazda Ford Ixion experiences issues?
How much will it cost to fix issues in my Mazda Ford Ixion?
Is the Mazda Ford Ixion a reliable car?
![]() Brian Wong / AuthorBrian Wong is an accomplished automotive journalist and editor with a passion for cars. With over a decade of experience in the industry, he has established himself as a trusted voice in the automotive community. Brian has written extensively about a wide range of topics in the field, from the latest trends in car design to innovative safety features and emerging technologies. As a senior reviews editor, he is responsible for test driving and analyzing the latest cars on the market, providing readers with accurate and objective reviews. His articles are widely read and respected for their depth of knowledge and analysis. Brian is committed to staying at the forefront of the latest developments in the automotive industry, and is dedicated to sharing his expertise and insights with his readers. |