Common Issues with the Great Wall Hover H6

By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on November 30, 2023

1. Overview of Great Wall Hover H6

1.1. Introduction to Great Wall Hover H6

The Great Wall Hover H6 is a mid-size SUV produced by the Chinese automaker Great Wall Motors. It was first introduced in 2011 and remained in production until 2020. The Hover H6 was designed to be a versatile and affordable SUV that could offer a comfortable driving experience both on and off-road.

One of the key features of the Great Wall Hover H6 was its modern and sporty design. The exterior of the vehicle featured bold lines, a sculpted hood, and a large front grille that gave it a distinctive look. The interior of the Hover H6 was designed with comfort and convenience in mind, with a spacious cabin that could accommodate up to five passengers. The dashboard and center console were well-organized and featured a range of modern features such as touchscreen infotainment systems, climate control, and multi-functional steering wheels.

The Great Wall Hover H6 was powered by a range of petrol and diesel engines, depending on the market. These engines ranged from naturally aspirated four-cylinder units to turbocharged options that could produce up to 190 horsepower. Depending on the engine, the Hover H6 could be equipped with either a manual or automatic transmission.

The Great Wall Hover H6 was also available in a range of trim levels, configurations, and complectations, depending on the market. These different versions of the SUV could have different features, options, and equipment, such as leather seats, sunroofs, panoramic cameras, and more. The Hover H6 also offered a range of safety features, including airbags, anti-lock brakes, stability control, and more.

Overall, the Great Wall Hover H6 was a reliable and versatile SUV that offered good value for money. While it faced some issues and problems over its years of production, these were mostly minor and could be easily fixed through regular maintenance and repairs. With its modern design, comfortable interior, and range of features, the Hover H6 remains a popular choice for SUV buyers looking for a quality and affordable vehicle.

1.2. Brief history of Great Wall Hover H6

The Great Wall Hover H6 was first introduced in 2011 as a mid-size SUV designed to offer a comfortable and versatile driving experience both on and off-road. The SUV was produced by the Chinese automaker Great Wall Motors, which was established in 1984 and has since become one of China's largest and most successful car manufacturers.

The Hover H6 was the successor to the Great Wall Hover, which was first introduced in 2005. The Hover was designed as a rugged and reliable SUV that could handle rough terrain and harsh weather conditions, and it became a popular choice among Chinese buyers who valued its durability and versatility.

When the Great Wall Hover H6 was first introduced, it was immediately praised for its modern and sporty design, which was a departure from the more utilitarian look of the original Hover. The Hover H6 featured bold lines, a sculpted hood, and a large front grille that gave it a distinctive and aggressive look.

In addition to its stylish design, the Great Wall Hover H6 was also praised for its comfortable interior and range of modern features. The SUV had a spacious cabin that could accommodate up to five passengers, and it offered a range of amenities such as touchscreen infotainment systems, climate control, and more.

Over the years, the Great Wall Hover H6 underwent several updates and facelifts, with new features and improvements added to keep it competitive in the highly competitive SUV market. Despite facing some challenges and issues, such as recalls and quality concerns, the Hover H6 remained a popular choice among SUV buyers who valued its combination of affordability, reliability, and modern design.

The Great Wall Hover H6 remained in production until 2020, when it was eventually replaced by the Great Wall Haval H6, which was designed to be a more modern and advanced version of the popular SUV. Despite being discontinued, the Hover H6 remains a popular choice for used car buyers looking for a quality and affordable mid-size SUV.

2. Common Issues with Great Wall Hover H6

2.1. Powertrain Issues

2.1.1. Engine overheating

One common issue that has been reported with the Great Wall Hover H6 is engine overheating. This can be caused by a variety of factors, including a malfunctioning cooling system, low coolant levels, or a faulty thermostat. When the engine overheats, it can cause serious damage to the vehicle's powertrain, which can be costly to repair.

One of the most common causes of engine overheating in the Great Wall Hover H6 is a malfunctioning cooling system. This can be caused by a variety of issues, such as a leak in the radiator or a malfunctioning water pump. When the cooling system isn't functioning properly, it can cause the engine to overheat, which can lead to serious damage.

Another common cause of engine overheating in the Great Wall Hover H6 is low coolant levels. When the coolant levels are too low, the engine can't regulate its temperature properly, which can cause it to overheat. This can be caused by a leak in the cooling system or by neglecting to check and top up the coolant levels regularly.

Finally, a faulty thermostat can also cause the engine to overheat. The thermostat is responsible for regulating the engine's temperature, and if it fails to open or close properly, it can cause the engine to overheat. This can be caused by a malfunctioning thermostat or by a buildup of debris or corrosion in the cooling system.

To prevent engine overheating in the Great Wall Hover H6, it's important to keep the cooling system in good condition and to regularly check and top up the coolant levels. If you notice any signs of overheating, such as a rising temperature gauge or steam coming from under the hood, it's important to stop the vehicle immediately and seek assistance. It's also important to have the vehicle regularly serviced by a qualified mechanic, who can inspect the cooling system and powertrain for any potential issues.

2.1.2. Engine misfires

Another common issue reported with the Great Wall Hover H6 is engine misfires. Engine misfires occur when one or more cylinders in the engine fail to ignite properly, causing a loss of power, vibration, and potentially damaging the engine.

There are a variety of factors that can cause engine misfires in the Great Wall Hover H6. One of the most common causes is a faulty spark plug or ignition coil. When the spark plug or ignition coil isn't working properly, it can cause the engine to misfire, resulting in reduced power and rough idling.

Another common cause of engine misfires in the Great Wall Hover H6 is a clogged fuel injector. When the fuel injector becomes clogged with debris or dirt, it can cause a lean fuel mixture, which can result in engine misfires. This can also lead to increased fuel consumption and potentially damage to the engine.

In addition, a malfunctioning oxygen sensor can also cause engine misfires in the Great Wall Hover H6. The oxygen sensor is responsible for monitoring the oxygen levels in the exhaust system, and if it fails, it can cause the engine to run too rich or too lean, resulting in engine misfires.

To prevent engine misfires in the Great Wall Hover H6, it's important to have the vehicle regularly serviced by a qualified mechanic. This includes routine maintenance such as replacing spark plugs, ignition coils, and fuel filters. Additionally, it's important to use high-quality fuel and to avoid driving with low fuel levels, which can increase the risk of clogged fuel injectors. If you notice any signs of engine misfires, such as rough idling or reduced power, it's important to have the vehicle inspected by a qualified mechanic to identify and address any potential issues.

2.1.3. Engine stalling

Another common powertrain issue reported with the Great Wall Hover H6 is engine stalling. Engine stalling occurs when the engine suddenly shuts off while the vehicle is in motion, which can be a dangerous situation, especially when driving on busy roads.

There are several factors that can cause engine stalling in the Great Wall Hover H6. One of the most common causes is a faulty ignition switch or starter motor. When the ignition switch or starter motor isn't functioning correctly, it can cause the engine to stall, as it fails to start properly.

Another cause of engine stalling in the Great Wall Hover H6 is a faulty fuel pump or fuel filter. When the fuel pump or fuel filter is damaged, it can restrict the flow of fuel to the engine, causing the engine to stall or stop running altogether.

In addition, engine stalling can also be caused by a malfunctioning mass air flow sensor or throttle position sensor. The mass air flow sensor monitors the amount of air entering the engine, and if it fails, it can cause the engine to stall. Similarly, the throttle position sensor is responsible for monitoring the position of the throttle, and if it fails, it can cause the engine to stall.

To prevent engine stalling in the Great Wall Hover H6, it's important to have the vehicle regularly serviced by a qualified mechanic. This includes routine maintenance such as replacing faulty ignition switches, starter motors, fuel pumps, and filters. Additionally, it's important to avoid driving with low fuel levels, as this can put additional strain on the fuel system and increase the risk of engine stalling. If you notice any signs of engine stalling, such as sudden loss of power or the engine shutting off while driving, it's important to have the vehicle inspected by a qualified mechanic to identify and address any potential issues.

2.1.4. Transmission problems

Transmission problems are another common issue reported with the Great Wall Hover H6. The transmission is responsible for transferring power from the engine to the wheels, and if it's not functioning correctly, it can cause a range of issues.

One of the most common transmission problems with the Great Wall Hover H6 is slipping or delayed shifting. This occurs when the transmission fails to shift gears smoothly or slips out of gear altogether. It can be caused by a range of issues, including low transmission fluid levels, damaged gears or clutch plates, or a malfunctioning torque converter.

Another common transmission issue with the Great Wall Hover H6 is a faulty transmission control module (TCM). The TCM is responsible for controlling the transmission and can fail due to a range of issues, such as faulty wiring or electronic components, software glitches, or overheating.

In addition, the Great Wall Hover H6 can also experience problems with the transmission cooler, which is responsible for regulating the temperature of the transmission fluid. When the transmission cooler fails, it can cause the transmission fluid to overheat, leading to damage to the transmission and other components.

To prevent transmission problems with the Great Wall Hover H6, it's important to have the vehicle regularly serviced by a qualified mechanic. This includes routine maintenance such as checking and replacing transmission fluid, inspecting gears and clutch plates, and ensuring the transmission cooler is functioning correctly. Additionally, it's important to avoid overloading the vehicle or towing heavy loads, as this can put additional strain on the transmission and increase the risk of damage. If you notice any signs of transmission problems, such as slipping or delayed shifting, it's important to have the vehicle inspected by a qualified mechanic to identify and address any potential issues.

2.2. Electrical Issues

2.2.1. Battery failure

Battery failure is a common issue with many vehicles, including the Great Wall Hover H6. The battery is responsible for providing the electrical power needed to start the engine and operate the vehicle's electrical systems. When the battery fails, it can cause a range of issues, including difficulty starting the engine and loss of power to electrical systems.

There are several reasons why the battery may fail in the Great Wall Hover H6. One of the most common is simply due to age and wear and tear. Over time, batteries can lose their ability to hold a charge, and eventually, they will need to be replaced.

Another common cause of battery failure in the Great Wall Hover H6 is due to electrical system issues. For example, a malfunctioning alternator can cause the battery to become drained, as it's responsible for recharging the battery while the engine is running. Similarly, faulty wiring or connections can prevent the battery from properly charging or discharging, leading to premature failure.

To prevent battery failure in the Great Wall Hover H6, it's important to have the vehicle's electrical system regularly inspected and maintained. This includes checking the battery's voltage and charging capacity, inspecting wiring and connections for damage or wear, and ensuring the alternator is functioning correctly. Additionally, it's important to avoid leaving the vehicle's electrical systems on for extended periods when the engine is not running, as this can drain the battery and decrease its overall lifespan. If you notice any signs of battery issues, such as difficulty starting the engine or loss of power to electrical systems, it's important to have the vehicle inspected by a qualified mechanic to identify and address any potential issues.

2.2.2. Alternator problems

The alternator is an essential component of the electrical system in the Great Wall Hover H6. Its primary function is to convert mechanical energy from the engine into electrical energy to power the vehicle's electrical systems and recharge the battery. When the alternator fails, it can cause a range of issues that can affect the performance and reliability of the vehicle.

One of the most common signs of alternator problems in the Great Wall Hover H6 is a warning light on the dashboard. This warning light typically looks like a battery, and it indicates that there is an issue with the vehicle's charging system. Other signs of alternator issues may include dimming headlights, slow cranking or clicking sounds when trying to start the engine, and loss of power to electrical systems such as the radio and air conditioning.

There are several reasons why the alternator may fail in the Great Wall Hover H6. One of the most common is due to wear and tear over time. Alternators have a limited lifespan and will eventually need to be replaced. Other common causes of alternator failure include faulty wiring or connections, a malfunctioning voltage regulator, or a broken serpentine belt.

To prevent alternator problems in the Great Wall Hover H6, it's important to have the electrical system regularly inspected and maintained. This includes checking the alternator's output voltage and amperage, inspecting wiring and connections for damage or wear, and ensuring the serpentine belt is in good condition and properly tensioned. Additionally, it's important to avoid overloading the electrical system by running too many accessories or devices at the same time. If you notice any signs of alternator issues, such as warning lights or dimming headlights, it's important to have the vehicle inspected by a qualified mechanic to identify and address any potential issues.

2.2.3. Starter motor issues

The starter motor is responsible for cranking the engine and starting the vehicle. Over time, the starter motor of a Great Wall Hover H6 may experience issues that prevent it from functioning properly. One common issue is when the starter motor fails to engage or turn the engine when the key is turned. This can be due to a number of factors such as a faulty starter solenoid, damaged starter motor or wiring issues.

Another common issue with the starter motor is when it continues to run even after the engine has started. This can cause excessive wear on the starter motor and drain the battery. This problem may be caused by a damaged starter solenoid or wiring issues.

In some cases, the starter motor may also produce a grinding noise when starting the vehicle. This can be due to a worn starter gear or a damaged flywheel ring gear. If this issue is not addressed promptly, it can cause further damage to the engine and transmission.

To prevent starter motor issues, it is important to have the starter system inspected regularly and replace any worn or damaged components as soon as possible. In addition, proper maintenance of the vehicle's electrical system can help prevent issues such as battery drain or damage to the starter motor. If you experience any issues with the starter motor, it is important to have a professional mechanic diagnose and repair the problem.

2.2.4. Electrical wiring faults

Electrical wiring faults are another common issue with the Great Wall Hover H6. The electrical system of a car is complex and interconnected, with various components relying on a steady supply of power to function properly. Faults in the electrical wiring can disrupt this supply, leading to a range of problems.

Some common symptoms of electrical wiring faults in the Great Wall Hover H6 include flickering lights, intermittent power loss, and strange noises or smells coming from the engine compartment. These symptoms can be caused by a number of different issues, such as damaged wiring, loose connections, or faulty electrical components.

It's important to address any electrical wiring faults in your Great Wall Hover H6 as soon as possible, as they can cause serious issues if left unaddressed. A skilled mechanic can diagnose the root cause of the problem and make the necessary repairs, which may involve replacing damaged wiring or faulty components.

To prevent electrical wiring faults in the Great Wall Hover H6, it's important to maintain the car's electrical system and have it inspected regularly by a qualified mechanic. This can help identify and address any potential issues before they become serious problems, ensuring the car runs smoothly and reliably for years to come.

2.3. Suspension and Steering Issues

2.3.1. Steering problems

The Great Wall Hover H6 has had some reported issues with its steering system, particularly with the power steering system. One of the most common issues is a loss of power steering assistance while driving, which can make the vehicle difficult to steer, especially at low speeds or when turning.

This problem may be caused by a variety of factors, including a low level of power steering fluid, a faulty power steering pump, or a problem with the power steering control module. In some cases, the issue may be related to a malfunctioning electrical component or wiring in the power steering system.

Other steering issues that have been reported with the Great Wall Hover H6 include excessive play in the steering wheel, a pulling to one side while driving, and uneven tire wear. These issues may be related to problems with the suspension system or wheel alignment, rather than with the steering system itself.

To diagnose and fix steering issues with the Great Wall Hover H6, it is important to have the vehicle inspected by a qualified mechanic. They will typically perform a visual inspection of the steering and suspension components, as well as check the power steering fluid level and quality. They may also use diagnostic equipment to identify any fault codes or other issues with the vehicle's onboard computer system.

Depending on the specific issue, repairs for steering problems with the Great Wall Hover H6 may involve replacing faulty components such as the power steering pump or control module, repairing damaged wiring or electrical connections, or adjusting the wheel alignment or suspension system. Regular maintenance, including regular inspections and fluid changes, can also help to prevent steering issues and prolong the life of the vehicle's steering system.

2.3.2. Suspension system issues

The suspension system is a critical part of any vehicle, and the Great Wall Hover H6 is no exception. The suspension system is responsible for providing a smooth and comfortable ride while also ensuring that the wheels maintain contact with the road surface. However, like any other vehicle, the Great Wall Hover H6 can experience suspension system issues over time.

One common issue with the suspension system of the Great Wall Hover H6 is the development of noise and vibrations when driving. These issues can be caused by worn out suspension components such as shocks, struts, and bushings. Damaged or worn-out components can cause the suspension system to become loose, resulting in increased noise and vibration. In some cases, the suspension system may also make clunking noises when going over bumps or uneven surfaces.

Another common issue with the suspension system of the Great Wall Hover H6 is uneven tire wear. This can be caused by a variety of issues, such as misaligned wheels, worn-out suspension components, or even a damaged frame. Uneven tire wear can result in poor handling and reduced traction, which can compromise the safety of the vehicle.

Finally, the Great Wall Hover H6 can also experience issues with the steering system. A common issue is difficulty turning the steering wheel, which can be caused by a variety of issues, such as a damaged power steering pump, worn-out steering components, or low power steering fluid levels. These issues can make it challenging to control the vehicle and can compromise the safety of the driver and passengers.

2.3.3. Brake problems

The braking system is a crucial safety component of any vehicle, and the Great Wall Hover H6 is no exception. However, some owners have reported issues with the braking system that require attention.

One of the most common problems reported by owners is a squeaking or squealing noise when braking. This can be caused by a variety of factors, including worn brake pads, warped rotors, or lack of lubrication. It is important to have these issues addressed promptly, as they can affect the overall performance of the braking system and potentially compromise safety.

Another issue reported by some owners is a soft or spongy brake pedal. This can be caused by air in the brake lines, a leaking master cylinder, or worn brake pads. Any of these issues can compromise the effectiveness of the braking system and should be addressed promptly.

In some cases, owners have reported that the brakes on their Great Wall Hover H6 are excessively sensitive, making it difficult to modulate the brake pedal. This can be caused by a malfunctioning brake booster or issues with the ABS system.

Finally, some owners have reported that the brake warning light on their dashboard remains illuminated, even after the brakes have been serviced. This can be caused by a variety of issues, including a malfunctioning ABS module or a faulty brake fluid level sensor.

It is important to address any issues with the braking system promptly to ensure the safety and reliability of your Great Wall Hover H6. Regular maintenance, including brake inspections and fluid flushes, can help prevent problems from developing in the first place.

2.3.4. Wheel alignment issues

Wheel alignment is an important aspect of any vehicle's suspension and steering system, including the Great Wall Hover H6. Proper wheel alignment ensures that the tires are perpendicular to the road and that they are all pointing in the same direction. Wheel misalignment can cause several problems, including uneven tire wear, reduced fuel efficiency, and poor handling.

Some common signs of wheel alignment issues include the vehicle pulling to one side, uneven or excessive tire wear, and steering wheel vibration. The causes of wheel misalignment can vary, but they are often due to hitting potholes, curbs, or other road hazards.

If you suspect that your Great Wall Hover H6 has wheel alignment issues, it is essential to have it inspected and fixed by a professional mechanic. The mechanic will use specialized equipment to measure the alignment angles of the wheels and make any necessary adjustments to bring them back into the manufacturer's specifications.

Regular maintenance and inspections of the suspension and steering system can help prevent wheel alignment issues and other related problems. It is recommended to have the alignment checked at least once a year or every 10,000 miles, whichever comes first. Proper wheel alignment can not only prolong the lifespan of your tires and improve fuel efficiency but also enhance the overall driving experience and safety of your vehicle.

3. Troubleshooting and Solutions for Great Wall Hover H6 Issues

3.1. Powertrain Troubleshooting and Solutions

3.1.1. Diagnosing engine overheating

Engine overheating can be a common issue with the Great Wall Hover H6, and it can be caused by several factors. The first step in diagnosing the problem is to check the engine coolant level and make sure it is at the proper level. If the coolant level is low, it could be due to a leak in the system, which will need to be repaired.

Another cause of engine overheating could be a faulty thermostat, which regulates the engine temperature. A malfunctioning thermostat may not open and close correctly, leading to overheating. In this case, the thermostat will need to be replaced.

A clogged radiator can also cause the engine to overheat. Over time, the radiator can become clogged with debris, dirt, and rust, preventing proper circulation of coolant. To fix this, the radiator will need to be cleaned or replaced.

It is also important to check the condition of the radiator fan. A malfunctioning fan will not cool the engine properly, leading to overheating. The fan may need to be replaced if it is not working correctly.

Lastly, a faulty water pump can also cause engine overheating. The water pump is responsible for circulating the coolant through the engine, and a malfunctioning pump can result in insufficient coolant flow. If the water pump is the problem, it will need to be replaced.

Overall, diagnosing and solving engine overheating in a Great Wall Hover H6 can be complex and requires proper diagnosis by a qualified mechanic.

3.1.2. Diagnosing engine misfires

Engine misfires can be a frustrating problem to deal with, but they are not uncommon in vehicles like the Great Wall Hover H6. There are a number of potential causes for engine misfires, ranging from simple and easily fixed issues to more complex and costly problems.

One of the most common causes of engine misfires is a problem with the spark plugs. Spark plugs are responsible for igniting the fuel in the engine's cylinders, and if they become dirty or worn out, they may not be able to do their job properly. A quick inspection of the spark plugs can usually determine whether or not they need to be replaced.

Another potential cause of engine misfires is a problem with the ignition coils. These coils are responsible for providing the electrical current that powers the spark plugs, and if they fail or become damaged, they may not be able to provide the necessary voltage to the spark plugs.

A clogged fuel filter or fuel injectors that are dirty or malfunctioning can also cause engine misfires. These components are responsible for delivering fuel to the engine, and if they become clogged or dirty, the engine may not be getting enough fuel to run properly.

Finally, a problem with the engine's sensors or computer system can also cause engine misfires. The sensors are responsible for monitoring various aspects of the engine's performance, and if they fail or become damaged, they may not be able to send accurate information to the computer, causing it to misinterpret the data and potentially leading to engine misfires.

If you are experiencing engine misfires in your Great Wall Hover H6, it is important to diagnose the problem as quickly as possible to avoid causing further damage to the engine. A qualified mechanic can perform a thorough inspection of the engine and its components to determine the underlying cause of the misfires, and recommend the appropriate solution to fix the problem.

3.1.3. Diagnosing engine stalling

Engine stalling is a common issue that can occur in any vehicle, including the Great Wall Hover H6. There are several reasons why the engine may stall, and identifying the root cause is crucial in addressing the issue.

One possible cause of engine stalling in the Great Wall Hover H6 is a faulty fuel system. A clogged fuel filter, damaged fuel pump, or malfunctioning fuel injectors can cause a lack of fuel supply to the engine, leading to stalling. It's important to check the fuel system for any issues and address them accordingly.

Another possible cause of engine stalling is a malfunctioning ignition system. This can include faulty spark plugs, a faulty ignition coil, or a faulty distributor cap. These components are responsible for igniting the fuel and air mixture in the engine cylinders, and if they're not functioning properly, the engine can stall.

Other potential causes of engine stalling in the Great Wall Hover H6 include a malfunctioning sensor, a vacuum leak, or a dirty throttle body. It's important to perform a thorough inspection of the vehicle's powertrain and electrical systems to identify any potential issues that could be causing the engine to stall.

Once the root cause of the engine stalling has been identified, appropriate action can be taken to address the issue. This may include replacing faulty components, cleaning or repairing damaged systems, or performing maintenance to prevent future issues from arising. Regular maintenance of the Great Wall Hover H6 is key to preventing engine stalling and other powertrain issues, so it's important to follow the manufacturer's recommended service intervals and keep the vehicle in good working condition.

3.1.4. Diagnosing transmission problems

The transmission system of the Great Wall Hover H6 is responsible for transferring power from the engine to the wheels. However, like any other vehicle, transmission problems can occur, leading to a decline in performance and even total failure of the transmission system. Some common transmission problems in the Great Wall Hover H6 include transmission slipping, difficulty in shifting gears, and strange noises coming from the transmission.

To diagnose transmission problems, one of the first things to do is to check the transmission fluid level and condition. Low or dirty transmission fluid can lead to transmission problems. A visual inspection of the transmission system is also necessary to check for any leaks, damages, or worn out parts.

Another way to diagnose transmission problems is through a computerized diagnostic system. This system can detect any issues with the transmission and provide the mechanic with the necessary information to fix the problem. The computerized diagnostic system can also reset any error codes in the vehicle's onboard computer.

In some cases, transmission problems can be fixed by repairing or replacing damaged parts. However, if the damage is extensive, a complete transmission overhaul may be necessary. Regular maintenance of the transmission system, including regular fluid changes and inspections, can help prevent transmission problems from occurring and extend the lifespan of the transmission.

In summary, diagnosing transmission problems in the Great Wall Hover H6 requires a thorough inspection of the transmission system, checking the fluid level and condition, and the use of a computerized diagnostic system. Early detection of transmission problems can help prevent further damage and extend the lifespan of the transmission system.

3.2. Electrical Troubleshooting and Solutions

3.2.1. Diagnosing battery failure

Battery failure is a common issue in the Great Wall Hover H6, and can lead to problems starting the vehicle or even cause the engine to stop running while driving. To diagnose this issue, it is important to check the battery voltage with a multimeter when the engine is off and when the engine is running. If the voltage is lower than normal when the engine is off, the battery may be discharged or have a faulty cell. If the voltage drops significantly when the engine is running, this may indicate a problem with the alternator.

It is also important to inspect the battery terminals for corrosion or loose connections, as this can also cause issues with the electrical system. If the terminals are corroded, they should be cleaned with a wire brush and a solution of baking soda and water. If the connections are loose, they should be tightened with a wrench.

Another possible cause of battery failure is a parasitic draw, which occurs when an electrical component in the vehicle is drawing power even when the engine is off. To diagnose this issue, a technician can perform a parasitic draw test, which involves disconnecting the negative battery cable and measuring the amperage draw between the battery terminal and the cable end with a multimeter. If there is a high amperage draw, this may indicate a problem with a component such as the radio or interior lights that is not turning off when the engine is off.

If the battery is determined to be faulty, it should be replaced with a new one that meets the manufacturer's specifications. It is important to choose a high-quality battery that is designed for use in the Great Wall Hover H6 to ensure reliable performance. Additionally, regular maintenance such as checking and cleaning the battery terminals and performing a parasitic draw test can help prevent battery failure and other electrical issues in the vehicle.

3.2.2. Diagnosing alternator problems

The alternator is an essential component of the Great Wall Hover H6's electrical system, as it is responsible for keeping the battery charged and providing power to the various electrical components of the vehicle. If there are problems with the alternator, it can cause a variety of issues with the vehicle's electrical system.

One of the most common signs of alternator problems in the Great Wall Hover H6 is a dead battery. If the alternator is not functioning properly, it may not be able to recharge the battery while the vehicle is running, causing the battery to become depleted over time. This can result in the vehicle not starting or stalling while driving.

Another common symptom of alternator problems is dimming or flickering headlights. This is because the alternator is not providing enough power to keep the headlights illuminated at full brightness. Other electrical components, such as the radio, air conditioning, and power windows, may also exhibit similar symptoms if the alternator is not functioning properly.

A whining or grinding noise coming from the engine bay may also be an indication of alternator issues. This noise is typically caused by a worn or damaged bearing within the alternator, which can cause the rotor to spin unevenly and produce the noise.

If you suspect that there may be issues with the alternator in your Great Wall Hover H6, it is important to have it diagnosed and repaired as soon as possible. A failing alternator can cause further damage to the electrical system, and can eventually lead to complete failure of the alternator and other electrical components.

3.2.3. Diagnosing starter motor issues

The starter motor is an essential component of any vehicle's electrical system. It is responsible for turning the engine over and getting it running. The Great Wall Hover H6 can experience starter motor issues just like any other vehicle.

One common issue is when the starter motor fails to engage when the ignition is turned on. This can be caused by a variety of factors, including a weak battery, corroded or loose connections, or a faulty starter solenoid. In some cases, the starter motor itself may be damaged and need to be replaced.

Another issue that can occur with the starter motor is when it spins but does not engage with the engine. This can be caused by a worn or damaged starter drive gear, a faulty starter solenoid, or a faulty ignition switch. In some cases, the problem may be with the flywheel, which may be damaged or worn, preventing the starter motor from engaging properly.

To diagnose starter motor issues in the Great Wall Hover H6, a technician will need to perform several tests. They may start by checking the battery and the connections to ensure that they are clean and secure. If the battery and connections are good, they may move on to testing the starter solenoid and starter motor to see if they are functioning properly. They may also check the flywheel and other components to see if they are damaged or worn.

Once the problem has been identified, the technician can recommend a solution. This may involve repairing or replacing damaged components, such as the starter motor, solenoid, or drive gear. It may also involve replacing the battery or making other electrical repairs.

Regular maintenance and inspection can help prevent starter motor issues in the Great Wall Hover H6. This includes checking the battery and connections, inspecting the starter motor and solenoid for signs of wear or damage, and addressing any issues promptly. By taking these steps, owners can help ensure that their vehicle's electrical system is working properly and that the engine starts reliably every time.

3.2.4. Diagnosing electrical wiring faults

Electrical wiring faults can be a common issue in the Great Wall Hover H6. The electrical system of the vehicle is responsible for powering many of the car's features, such as the lights, audio system, and dashboard. Electrical wiring faults can lead to these features malfunctioning or not working at all.

Some common signs of electrical wiring faults in the Great Wall Hover H6 include flickering or dimming headlights, dashboard warning lights that remain illuminated, audio system malfunctions, and power windows or locks that don't work correctly. These issues can be caused by a variety of problems, including loose or corroded wiring connections, damaged wiring harnesses, or faulty electrical components.

To diagnose an electrical wiring fault in the Great Wall Hover H6, it's essential to start by inspecting the wiring and electrical connections visually. Any signs of frayed or damaged wires, loose connections, or corrosion must be addressed promptly. If visual inspection doesn't uncover any obvious issues, an electrical diagnostic tool can be used to identify the problem area. This tool can pinpoint the specific area of the wiring harness that's causing the fault.

Once the fault has been identified, repairs can be made by replacing the damaged wiring or electrical component. It's important to make sure that all wiring connections are tightened correctly and that the wiring harness is securely fastened in place. After repairs have been made, the electrical system should be tested to ensure that the issue has been resolved.

Overall, electrical wiring faults in the Great Wall Hover H6 can be frustrating and difficult to diagnose, but with proper inspection and repair, they can be resolved. It's essential to address any electrical issues promptly to avoid more severe problems and ensure the vehicle's continued safe operation.

3.3. Suspension and Steering Troubleshooting and Solutions

3.3.1. Diagnosing steering problems

Steering problems are common issues that can affect the Great Wall Hover H6. There are a number of potential causes of steering problems, and diagnosing the root cause is essential in order to implement an effective solution.

One of the most common causes of steering problems in the Great Wall Hover H6 is a faulty power steering system. This can cause difficulty in turning the wheel, or a jerky, uneven feeling when turning. If this is the case, the power steering pump may need to be replaced or the system may need to be flushed and refilled with new fluid.

Another possible cause of steering problems in the Great Wall Hover H6 is worn or damaged steering components such as tie rods, ball joints, or the steering rack itself. These parts can wear out over time or become damaged due to road hazards or accidents, causing issues such as wandering, pulling to one side, or difficulty maintaining a straight line.

Issues with the suspension system can also lead to steering problems in the Great Wall Hover H6. Worn or damaged shocks or struts, as well as worn or damaged bushings, can cause the vehicle to bounce or sway excessively, leading to difficulty in controlling the vehicle while turning.

In order to diagnose the specific cause of steering problems in the Great Wall Hover H6, it is important to have a professional mechanic perform a thorough inspection of the vehicle. This may include a visual inspection of the steering and suspension components, as well as a test drive to evaluate the handling and steering feel of the vehicle. Once the root cause of the issue has been identified, the mechanic can recommend the appropriate repair or replacement options to ensure safe and reliable operation of the vehicle.

3.3.2. Diagnosing suspension system issues

The suspension system of the Great Wall Hover H6 is designed to provide a smooth and comfortable ride while also ensuring safety and stability on the road. However, like any other vehicle, it is prone to wear and tear over time, leading to potential issues. If you notice any of the following symptoms, it's important to diagnose the problem and find a solution as soon as possible:

1. Unusual noises: If you hear clunking or banging sounds while driving over bumps or turning, it could indicate a problem with the suspension system.

2. Uneven tire wear: If the tires are wearing unevenly or quickly, it could be a sign of suspension issues. Misaligned wheels, worn-out shocks or struts, and other problems could cause this issue.

3. Vehicle bounces excessively: If the car bounces more than usual or takes a long time to settle after hitting a bump, it could be a sign of worn-out shocks or struts.

4. Difficulty steering: If the steering feels stiff or unresponsive, it could be a sign of a problem with the suspension system.

5. Car pulls to one side: If the vehicle pulls to one side while driving, it could indicate a problem with the suspension or steering components.

To diagnose suspension system issues, you may need to inspect the shocks, struts, springs, bushings, and other components. It's important to take the car to a qualified mechanic to accurately diagnose and repair any suspension system problems. Some possible solutions include replacing worn-out components, aligning the wheels, or repairing any damaged parts. Proper maintenance and regular inspections can help prevent suspension system issues and ensure the longevity and safety of your Great Wall Hover H6.

3.3.3. Diagnosing brake problems

The Great Wall Hover H6 is a reliable vehicle but like any other car, it may develop brake issues. One of the most common problems associated with the braking system is brake failure, which can be a severe safety issue. It can be caused by a leak in the brake lines, worn-out brake pads, or a malfunctioning brake booster.

Another common brake problem is a soft or spongy brake pedal. A soft brake pedal may indicate air in the brake lines, worn brake pads, or a damaged brake rotor. Other symptoms of brake problems in the Great Wall Hover H6 include grinding, squeaking or squealing brakes, and vibrations or pulsations while braking.

To diagnose brake issues in the Great Wall Hover H6, start by checking the brake fluid level and the condition of the brake pads and rotors. Also, inspect the brake lines for leaks and damage. If you notice any signs of wear or damage, replace the affected parts immediately. Additionally, consider bleeding the brakes to remove any trapped air in the system.

If the brake problem persists, it may be due to a malfunctioning brake booster or master cylinder. A faulty brake booster can cause a hard brake pedal, while a malfunctioning master cylinder can result in a soft or spongy brake pedal. In this case, it's best to take the vehicle to a qualified mechanic for proper diagnosis and repair.

Regular brake maintenance and inspections are crucial in ensuring the safety of the Great Wall Hover H6. It's recommended to have the brakes checked at least once a year or more frequently if you frequently drive in stop-and-go traffic or mountainous areas. Proper brake maintenance will also prolong the life of your vehicle's braking system and save you money in the long run.

3.3.4. Diagnosing wheel alignment issues

Great Wall Hover H6 is a reliable SUV with good performance, but it may experience wheel alignment issues due to various factors. Common signs of wheel alignment problems in Great Wall Hover H6 include uneven tire wear, vehicle pulling to one side, steering wheel vibration, and wandering steering.

To diagnose wheel alignment issues, you may need to check the tire pressure, inspect the tires for damage, and examine the suspension and steering components. You can also use specialized equipment like a wheel alignment machine to determine the degree of misalignment in the vehicle's wheels and adjust them accordingly.

One of the common causes of wheel alignment issues in Great Wall Hover H6 is hitting a curb or pothole, which can cause misalignment in the vehicle's wheels. Other factors that may contribute to wheel alignment problems include worn suspension components, bent or damaged wheels, and improper installation of suspension or steering parts.

If you suspect that your Great Wall Hover H6 is experiencing wheel alignment issues, it's essential to address the problem as soon as possible to prevent further damage to the vehicle's tires and suspension components. Regular maintenance and inspection of the vehicle's wheels, tires, and suspension can also help prevent wheel alignment problems from occurring in the first place.

Overall, wheel alignment issues in Great Wall Hover H6 can cause significant problems with the vehicle's handling and stability. Therefore, it's essential to diagnose and address any wheel alignment problems promptly to ensure the vehicle's safety and performance.

4. Preventative Maintenance for Great Wall Hover H6

4.1. Regular Engine Maintenance

Regular engine maintenance is essential to ensure the longevity and performance of your Great Wall Hover H6. Some of the most important preventative maintenance tasks for the engine include regular oil changes, checking and replacing the air filter, inspecting and replacing the spark plugs, and maintaining the cooling system.

Oil changes are necessary to keep the engine lubricated and to remove dirt and debris that can accumulate over time. It is recommended to change the oil every 5,000 to 7,500 miles or as recommended by the manufacturer. In addition, it is important to regularly check the oil level to ensure that the engine is not running low on oil.

The air filter should also be checked and replaced regularly. The air filter prevents dirt and debris from entering the engine and can become clogged over time. A clogged air filter can reduce the engine's performance and fuel efficiency. It is recommended to replace the air filter every 10,000 to 15,000 miles.

Spark plugs should also be inspected and replaced as needed. Worn or damaged spark plugs can cause the engine to misfire or run rough. It is recommended to replace the spark plugs every 30,000 to 50,000 miles.

Finally, the cooling system should be maintained to prevent overheating and engine damage. This includes checking the coolant level, inspecting the hoses for leaks or damage, and replacing the coolant as recommended by the manufacturer. It is also important to regularly inspect the radiator and cooling fans for any obstructions or damage.

By performing these preventative maintenance tasks, you can help ensure that your Great Wall Hover H6's engine runs smoothly and efficiently for years to come.

4.2. Regular Electrical System Maintenance

Regular maintenance of the electrical system is crucial to ensure the smooth operation of the Great Wall Hover H6. The electrical system includes the battery, alternator, starter motor, wiring, and various electrical components, such as lights, sensors, and gauges.

One of the most important preventative maintenance tasks for the electrical system is to regularly check the battery. The battery should be checked for corrosion and loose connections. If there is corrosion, it should be removed with a wire brush and baking soda solution. The battery terminals should be cleaned and tightened to ensure proper contact. It is also important to check the battery's electrolyte levels and keep them topped up with distilled water if needed.

Another important maintenance task is to check the alternator. The alternator's belt should be checked for wear and tension, and replaced if necessary. The alternator output voltage should also be checked to ensure that it is within the manufacturer's recommended range.

Regular inspection of the wiring and electrical components is also important to prevent issues before they occur. The wiring should be checked for fraying, damage, or loose connections. Any damaged wiring should be repaired or replaced immediately. Electrical components such as fuses, relays, and switches should also be checked regularly and replaced if they are worn out or not functioning correctly.

It is also important to ensure that all electrical components are working correctly, including lights, sensors, and gauges. If any of these components are not functioning correctly, they should be inspected and repaired or replaced as needed.

Regular preventative maintenance of the electrical system can prevent issues from occurring and ensure the reliable operation of the Great Wall Hover H6. It is recommended to have a professional mechanic perform these tasks to ensure they are done correctly and safely.

4.3. Regular Suspension and Steering System Maintenance

Proper maintenance of the suspension and steering system is crucial for the safety and performance of your Great Wall Hover H6. Here are some preventative maintenance tips to keep your suspension and steering system in top condition:

1. Regularly inspect the suspension and steering components: This includes checking for any signs of wear or damage to the shocks, struts, springs, control arms, ball joints, tie rods, and steering rack. Any worn or damaged components should be replaced immediately.

2. Check and maintain proper tire pressure: Incorrect tire pressure can cause uneven tire wear, affect handling and steering, and even cause suspension damage. Make sure to check your tire pressure regularly and keep it at the recommended levels.

3. Keep your wheels properly aligned: Misaligned wheels can cause excessive tire wear, poor handling, and steering problems. Regularly check and adjust the wheel alignment as needed.

4. Lubricate suspension and steering components: Proper lubrication can help reduce wear and tear on suspension and steering components. Be sure to lubricate the ball joints, tie rods, and other moving parts as recommended by the manufacturer.

5. Inspect the power steering system: Check the power steering fluid level and condition regularly. If the fluid is low or dirty, it can cause damage to the power steering pump and other components.

By following these preventative maintenance tips, you can help extend the lifespan of your Great Wall Hover H6's suspension and steering system, ensure optimal performance, and keep you and your passengers safe on the road.

4.4. Regular Brake Maintenance

Regular brake maintenance is essential to ensure that your Great Wall Hover H6 is always safe to drive. The brake system should be inspected regularly, and any necessary repairs should be made immediately to prevent further damage.

One of the essential components of the brake system is the brake pads. Over time, brake pads wear down and need to be replaced. Regular inspection of the brake pads can help prevent damage to other brake components, such as the rotors.

Brake fluid should also be checked regularly. Over time, brake fluid can become contaminated and lose its effectiveness, which can compromise the brake system's overall performance. If the brake fluid is low, it may be an indication of a leak, and the system should be inspected for damage.

The brake system's rotors should also be checked for signs of wear or damage, such as warping or cracking. Rotors that are worn or damaged can cause the brake pedal to vibrate or pulsate, making it difficult to stop the vehicle.

Regular maintenance of the brake system can also prevent problems with the ABS (anti-lock braking system). The ABS system should be checked periodically to ensure that it is functioning correctly. If the ABS warning light comes on, it may be an indication that there is a problem with the system, and it should be inspected immediately.

Overall, regular brake maintenance is essential to ensure that your Great Wall Hover H6 is safe to drive. If you notice any issues with your brakes, such as unusual noises or decreased stopping power, you should have them inspected by a qualified mechanic as soon as possible.

5. Conclusion

5.1. Recap of Common Issues and Troubleshooting Solutions

Throughout this troubleshooting guide for the Great Wall Hover H6, we have covered various common issues and their solutions for the powertrain, electrical system, suspension and steering systems, and brake system.

For powertrain issues, we have discussed how to diagnose and fix transmission problems, battery failure, alternator problems, and starter motor issues. For electrical system issues, we have covered troubleshooting and solutions for issues related to the battery, alternator, starter motor, and electrical wiring. In addition, we have discussed regular preventative maintenance for the electrical system.

Regarding the suspension and steering systems, we have covered how to diagnose and fix steering problems, suspension system issues, and wheel alignment issues. We have also included preventative maintenance recommendations for these systems.

Lastly, we have discussed common brake problems and solutions and the importance of regular brake maintenance.

Overall, proper maintenance and timely diagnosis and repair of issues are crucial to keep your Great Wall Hover H6 running smoothly and reliably. It is important to address any issues promptly to prevent further damage or potential safety hazards. By following the troubleshooting and maintenance recommendations discussed in this guide, you can ensure the longevity and safety of your vehicle.

5.2. Importance of Regular Maintenance for Avoiding Issues

Regular maintenance is essential for any vehicle, and the Great Wall Hover H6 is no exception. By performing preventative maintenance regularly, you can avoid potential issues and keep your vehicle running smoothly.

Regular maintenance of the engine, electrical system, suspension and steering system, brakes, and other components can help identify and fix potential problems before they become major issues. It also helps to increase the lifespan of the vehicle and keep it in good condition.

Neglecting regular maintenance can lead to a host of problems, including decreased fuel efficiency, poor performance, and even safety hazards. Additionally, skipping regular maintenance may void the warranty and reduce the resale value of the vehicle.

Regular maintenance is a wise investment that saves time, money, and headaches in the long run. By following the recommended maintenance schedule for your Great Wall Hover H6, you can avoid many common issues and enjoy a reliable and safe driving experience.

5.3. Final Thoughts on Great Wall Hover H6

In conclusion, the Great Wall Hover H6 is a well-built and reliable vehicle that has gained popularity in various markets. Like any other vehicle, it may experience issues from time to time, especially if regular maintenance is not performed. However, many of these issues can be resolved through proper diagnosis and troubleshooting. It is essential to be aware of the common issues that may arise and take the necessary steps to prevent them from happening.

Regular maintenance, including engine, electrical, suspension, steering, and brake maintenance, can help avoid potential issues and ensure that the Great Wall Hover H6 runs smoothly. It is also important to seek the help of a qualified mechanic or technician if any issues arise that are beyond the scope of regular maintenance.

Overall, the Great Wall Hover H6 is a great vehicle that offers comfort, reliability, and a good driving experience. By following the manufacturer's recommended maintenance schedule and taking prompt action to resolve any issues that arise, owners can keep their Great Wall Hover H6 in excellent condition for years to come.

Example List of Great Wall Hover H6 Engine Error Codes and Descriptions

Frequently Asked Questions about Issues with the Great Wall Hover H6

• Do you have problems with car?
• Write a Review