Common Issues with Derways Plutus: Troubleshooting and Maintenance

By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on February 29, 2024
1. General issues with Derways Plutus
1.1. Engine performance problems
1.2. Electrical system problems
1.3. Suspension and steering problems
2. Issues by year and model
2.1. Derways Plutus 2004-2008
2.2. Derways Plutus 2009-2012
2.3. Derways Plutus 2013-present
3. Issues by generation and complectations
3.1. First generation Derways Plutus (2004-2012)
3.2. Second generation Derways Plutus (2013-present)
3.3. Different complectations of Derways Plutus
4. Engine-specific issues
4.1. 2.4-liter gasoline engine (code: 4G64S4M)
4.2. 2.8-liter turbocharged diesel engine (code: 4JB1TC)
4.3. 2.5-liter turbocharged diesel engine (code: 4JA1L)
4.4. 2.2-liter gasoline engine (code: 491Q-ME)
5. Common issues by system
5.1. Engine system
5.2. Transmission system
5.3. Suspension system
5.4. Electrical system
6. Common maintenance tasks
6.1. Oil changes
6.2. Timing belt replacement
6.3. Brake system maintenance
6.4. Suspension system maintenance
7. How to troubleshoot issues
7.1. Check engine light
7.2. Fluid leaks
7.3. Unusual noises
7.4. Poor performance or handling
8. When to seek professional help
9. Conclusion
Frequently Asked Questions (FAQ) About Common Issues with Derways Plutus
Example List of Derways Plutus Engine Error Codes and Descriptions

1. General issues with Derways Plutus

1.1. Engine performance problems

The Derways Plutus is a reliable and robust vehicle designed to tackle various terrains and conditions. However, like any other vehicle, it may experience performance issues over time that require immediate attention. In this section, we'll discuss some of the most common engine performance problems that Derways Plutus owners face.

One of the most common engine performance problems in Derways Plutus is a loss of power. A vehicle may experience a loss of power due to various reasons, including clogged air filters, damaged fuel lines, and faulty fuel pumps. To prevent this problem, it is recommended to replace the air filter at regular intervals and ensure that the fuel lines are clean and clear of debris.

Another common performance issue in Derways Plutus is a rough or shaky engine. This problem may occur due to several reasons, including damaged spark plugs, worn-out ignition coils, or a faulty engine control module. To diagnose this issue, it is recommended to have the vehicle scanned for any error codes, and the spark plugs and ignition coils should be replaced if they are found to be faulty.

Engine misfires are also a common problem in Derways Plutus. This issue may occur due to various reasons, including worn-out spark plugs, faulty fuel injectors, or a malfunctioning ignition system. To prevent engine misfires, it is recommended to replace the spark plugs at regular intervals and ensure that the fuel injectors are clean and functioning correctly.

Finally, another engine performance issue that Derways Plutus owners may encounter is a decrease in fuel efficiency. This problem may occur due to clogged air filters, worn-out oxygen sensors, or a faulty fuel pump. To prevent this issue, it is recommended to replace the air filter at regular intervals, and the oxygen sensors and fuel pump should be checked for proper functionality.

1.2. Electrical system problems

The electrical system in a vehicle is a crucial component that ensures that all the electronic systems are functioning correctly. Derways Plutus is no exception, and it may encounter some electrical system problems over time. In this section, we'll discuss some of the most common electrical system problems that Derways Plutus owners may face.

One of the most common electrical system problems in Derways Plutus is a dead battery. A dead battery may occur due to several reasons, including leaving the lights on for an extended period, a faulty alternator, or a damaged battery. To prevent this problem, it is recommended to ensure that all electronic systems are turned off when the vehicle is not in use and have the battery checked regularly.

Another common problem is issues with the starter motor. A faulty starter motor may prevent the vehicle from starting, which can be frustrating for the owner. This problem may occur due to several reasons, including a dead battery, a faulty starter motor, or a damaged ignition switch. To diagnose this issue, it is recommended to have the starter motor and ignition switch checked by a qualified mechanic.

Faulty alternators are also a common electrical system problem in Derways Plutus. A faulty alternator can cause the battery to drain quickly, which can prevent the vehicle from starting. This problem may occur due to several reasons, including a damaged alternator belt, faulty voltage regulator, or a faulty alternator. To diagnose this issue, it is recommended to have the alternator checked by a qualified mechanic.

Finally, faulty fuses are another common electrical system problem in Derways Plutus. A blown fuse can cause various electronic systems to stop working, including the headlights, radio, and power windows. This problem may occur due to several reasons, including a short circuit, a faulty component, or a damaged fuse. To diagnose this issue, it is recommended to have the fuses checked and replaced by a qualified mechanic.

1.3. Suspension and steering problems

The suspension and steering system in a vehicle are essential components that ensure a smooth and stable ride. Derways Plutus is no exception, and it may encounter some suspension and steering problems over time. In this section, we'll discuss some of the most common suspension and steering problems that Derways Plutus owners may face.

One of the most common suspension problems in Derways Plutus is worn-out shock absorbers. The shock absorbers are responsible for ensuring a smooth ride by absorbing the shocks and vibrations from the road. Over time, they may become worn-out, which can result in a bumpy ride, reduced handling, and increased tire wear. To prevent this problem, it is recommended to have the shock absorbers checked regularly and replaced as needed.

Another common problem is issues with the steering system. The steering system in Derways Plutus may encounter problems such as loose or worn-out steering components, including the tie rods, ball joints, and steering rack. These problems can result in poor handling, increased tire wear, and a lack of control over the vehicle. To diagnose this issue, it is recommended to have the steering system checked by a qualified mechanic.

Faulty suspension components such as worn-out bushings or springs are also common suspension problems in Derways Plutus. These problems can cause uneven tire wear, a bumpy ride, and reduced handling. To prevent this problem, it is recommended to have the suspension components checked regularly and replaced as needed.

Finally, alignment issues are also common suspension problems in Derways Plutus. Misaligned wheels can result in poor handling, uneven tire wear, and a lack of control over the vehicle. To diagnose this issue, it is recommended to have the wheels checked and aligned by a qualified mechanic.

2. Issues by year and model

2.1. Derways Plutus 2004-2008

The Derways Plutus was produced from 2004 to 2018, and each year and model may have its own set of issues. In this section, we'll discuss some of the most common issues with the 2004-2008 Derways Plutus models.

One of the most common issues with the 2004-2008 Derways Plutus models is engine problems. Many owners have reported issues with the engine's power and performance, which can be caused by several factors. Some owners have reported issues with the fuel injection system, while others have experienced issues with the timing chain or oil leaks. To prevent these problems, it is recommended to have the engine checked regularly and perform regular maintenance, including oil changes.

Another issue with the 2004-2008 Derways Plutus models is electrical problems. Many owners have reported issues with the electrical system, including problems with the wiring and the battery. Some owners have also reported issues with the dashboard and instrument cluster, including faulty gauges and warning lights. To diagnose and fix these problems, it is recommended to have the electrical system checked by a qualified mechanic.

The 2004-2008 Derways Plutus models may also experience problems with the transmission. Many owners have reported issues with the automatic transmission, including slipping gears and difficulty shifting. To prevent these problems, it is recommended to have the transmission checked regularly and perform regular maintenance, including fluid changes.

Finally, the 2004-2008 Derways Plutus models may encounter suspension problems. Some owners have reported issues with the suspension, including worn-out shocks and struts, which can result in a bumpy ride and reduced handling. To prevent these problems, it is recommended to have the suspension checked regularly and replace any worn-out components as needed.

2.2. Derways Plutus 2009-2012

The Derways Plutus was produced from 2004 to 2018, and each year and model may have its own set of issues. In this section, we'll discuss some of the most common issues with the 2009-2012 Derways Plutus models.

One of the most common issues with the 2009-2012 Derways Plutus models is engine problems. Many owners have reported issues with the engine's power and performance, which can be caused by several factors. Some owners have reported issues with the fuel injection system, while others have experienced issues with the timing chain or oil leaks. To prevent these problems, it is recommended to have the engine checked regularly and perform regular maintenance, including oil changes.

Another issue with the 2009-2012 Derways Plutus models is transmission problems. Many owners have reported issues with the automatic transmission, including slipping gears and difficulty shifting. Some owners have also reported issues with the clutch in manual transmission models. To prevent these problems, it is recommended to have the transmission checked regularly and perform regular maintenance, including fluid changes.

The 2009-2012 Derways Plutus models may also experience problems with the suspension. Some owners have reported issues with the suspension, including worn-out shocks and struts, which can result in a bumpy ride and reduced handling. To prevent these problems, it is recommended to have the suspension checked regularly and replace any worn-out components as needed.

Finally, the 2009-2012 Derways Plutus models may encounter electrical problems. Many owners have reported issues with the electrical system, including problems with the wiring and the battery. Some owners have also reported issues with the dashboard and instrument cluster, including faulty gauges and warning lights. To diagnose and fix these problems, it is recommended to have the electrical system checked by a qualified mechanic.

2.3. Derways Plutus 2013-present

The Derways Plutus has undergone some changes since its initial release in 2004. In this section, we'll discuss some of the most common issues with the 2013-present Derways Plutus models.

One of the most common issues with the 2013-present Derways Plutus models is engine problems. Some owners have reported issues with the engine's power and performance, which can be caused by several factors. Some owners have reported issues with the fuel injection system, while others have experienced issues with the timing chain or oil leaks. To prevent these problems, it is recommended to have the engine checked regularly and perform regular maintenance, including oil changes.

Another issue with the 2013-present Derways Plutus models is transmission problems. Many owners have reported issues with the automatic transmission, including slipping gears and difficulty shifting. Some owners have also reported issues with the clutch in manual transmission models. To prevent these problems, it is recommended to have the transmission checked regularly and perform regular maintenance, including fluid changes.

The 2013-present Derways Plutus models may also experience problems with the suspension. Some owners have reported issues with the suspension, including worn-out shocks and struts, which can result in a bumpy ride and reduced handling. To prevent these problems, it is recommended to have the suspension checked regularly and replace any worn-out components as needed.

Finally, the 2013-present Derways Plutus models may encounter electrical problems. Many owners have reported issues with the electrical system, including problems with the wiring and the battery. Some owners have also reported issues with the dashboard and instrument cluster, including faulty gauges and warning lights. To diagnose and fix these problems, it is recommended to have the electrical system checked by a qualified mechanic.

3. Issues by generation and complectations

3.1. First generation Derways Plutus (2004-2012)

The first generation Derways Plutus was produced from 2004 to 2012 and it faced various issues related to its generation and different complectations. One of the common issues faced by the first generation Derways Plutus was related to its engine. Many users reported that their car's engine started making a knocking noise and resulted in reduced power output. This was caused by the use of low-quality fuel and a lack of regular maintenance. To avoid this problem, it is recommended to use high-quality fuel and to maintain the engine regularly.

Another issue that was commonly reported with the first generation Derways Plutus was related to the suspension system. The suspension system was found to be too soft and resulted in a bumpy ride. This issue can be solved by replacing the suspension system with a higher quality one or by using a higher tire pressure.

The electrical system of the first generation Derways Plutus also faced various issues. Users reported problems with the car's battery and alternator, resulting in a weak electrical system. To avoid this issue, it is recommended to replace the battery and alternator regularly and to ensure that the electrical system is maintained properly.

In terms of complectations, the first generation Derways Plutus with a diesel engine was reported to have issues related to the diesel particulate filter (DPF). The DPF required regular maintenance and cleaning, which was often neglected by users. Neglecting the DPF resulted in reduced power output and increased fuel consumption.

Overall, the first generation Derways Plutus faced various issues related to its engine, suspension system, and electrical system. Regular maintenance and the use of high-quality components can help avoid these issues and ensure the car's longevity.

3.2. Second generation Derways Plutus (2013-present)

The second generation Derways Plutus, which was introduced in 2013, features several improvements over the first generation. However, like any other vehicle, it also has its share of issues that owners may encounter.

One common issue reported by owners of the second generation Derways Plutus is related to the transmission system. Some owners have reported issues with the transmission slipping, not shifting smoothly, or even failing altogether. These issues can be caused by a number of factors, including low transmission fluid levels, worn-out clutch plates, or a faulty torque converter. In some cases, the transmission may need to be completely replaced to resolve the issue.

Another issue reported by some owners is related to the engine. Some have reported that the engine is not as powerful as it should be or that it idles roughly. This can be caused by a number of factors, including a clogged air filter, faulty spark plugs, or a malfunctioning fuel injector. In some cases, a complete engine overhaul may be necessary to fix the issue.

In addition to these issues, some owners have reported problems with the electrical system of the second generation Derways Plutus. This can include issues with the battery, alternator, or starter motor. In some cases, the wiring may need to be replaced or repaired to resolve the issue.

When it comes to suspension and steering, some owners have reported issues with the shocks and struts. These components can wear out over time, causing the vehicle to handle poorly or to bounce excessively over bumps. In some cases, the entire suspension system may need to be replaced to address the issue.

Overall, the second generation Derways Plutus is a reliable vehicle with a number of improvements over its predecessor. However, like any vehicle, it is not without its issues. If you experience any of these issues, it is important to have them diagnosed and repaired by a qualified mechanic to ensure the continued safe and reliable operation of your vehicle.

3.3. Different complectations of Derways Plutus

The Derways Plutus is available in different complectations, each with its own set of features and issues. Here are some of the issues that have been reported for different complectations of the Derways Plutus:

1. Derways Plutus Base:
The base model of the Derways Plutus is the most basic complectation and comes with minimal features. Some issues that have been reported for this model include:

- Lack of power and acceleration due to the small engine size
- Poor fuel efficiency
- Low-quality interior materials and finish
- Limited safety features, such as no airbags

2. Derways Plutus Comfort:
The Comfort complectation comes with additional features such as air conditioning, power windows, and a CD player. Some of the issues that have been reported for this complectation include:

- Electrical problems, such as issues with the power windows and CD player
- Suspension problems, including excessive noise and vibration while driving
- Poor fuel efficiency due to the added weight of the additional features

3. Derways Plutus Deluxe:
The Deluxe complectation comes with even more features, including alloy wheels, fog lights, and a leather interior. Some of the issues reported for this model include:

- Electrical problems, such as issues with the power windows and stereo system
- Suspension problems, including excessive noise and vibration while driving
- Engine problems, such as misfires and stalling
- Transmission problems, including slipping and difficulty shifting gears

4. Derways Plutus Luxe:
The Luxe complectation is the most high-end model of the Derways Plutus, and comes with features such as a sunroof, heated seats, and a navigation system. Some issues reported for this model include:

- Electrical problems, such as issues with the navigation system and stereo system
- Suspension problems, including excessive noise and vibration while driving
- Engine problems, such as misfires and stalling
- Transmission problems, including slipping and difficulty shifting gears

Overall, while the Derways Plutus offers a range of complectations with varying features, it is important to note that many models have reported issues with electrical systems, suspension, and engine performance. It is important to thoroughly research and test drive any model before making a purchase decision.

4. Engine-specific issues

4.1. 2.4-liter gasoline engine (code: 4G64S4M)

The Derways Plutus is equipped with a 2.4-liter gasoline engine, with a code of 4G64S4M. While this engine has proven to be reliable, there are some common issues that owners may experience.

One issue that has been reported is a ticking noise coming from the engine. This could be caused by a problem with the valve lash adjuster, which may need to be replaced. Additionally, a knocking noise from the engine could be caused by worn connecting rod bearings, which may also require replacement.

Another issue that some owners have experienced is a loss of power or stalling. This could be caused by a variety of factors, such as a clogged fuel filter or a faulty fuel pump. It is important to have these issues diagnosed and repaired by a qualified mechanic to prevent further damage to the engine.

Owners may also notice that the engine is burning oil or experiencing leaks. This could be caused by a faulty valve cover gasket or a worn piston ring, which may need to be replaced. It is important to address these issues promptly to prevent further damage to the engine.

Overall, while the 2.4-liter gasoline engine in the Derways Plutus is generally reliable, it is important for owners to stay vigilant for any signs of issues and address them promptly to ensure the longevity and performance of the engine.

4.2. 2.8-liter turbocharged diesel engine (code: 4JB1TC)

The 2.8-liter turbocharged diesel engine (code: 4JB1TC) is one of the engine options available in the Derways Plutus. This engine is known for its durability and fuel efficiency. However, there are some issues that owners of this engine may experience.

One common issue is a lack of power, which can be caused by a variety of factors such as clogged fuel injectors or a failing turbocharger. Owners may also experience excessive smoke coming from the exhaust, which can be a sign of a failing turbocharger or a problem with the fuel injection system.

Another issue that owners may face is a leak in the fuel system, which can cause fuel to spill onto the engine and create a fire hazard. This can be caused by a faulty fuel injector or a damaged fuel line.

It is also important for owners to regularly maintain their diesel engines, as neglecting routine maintenance can lead to issues such as carbon buildup in the engine or a clogged diesel particulate filter.

To prevent these issues, owners of the Derways Plutus with the 2.8-liter turbocharged diesel engine should regularly service their engine and pay attention to any changes in performance or unusual smoke or smells coming from the exhaust. They should also address any fuel leaks immediately to prevent a fire hazard.

4.3. 2.5-liter turbocharged diesel engine (code: 4JA1L)

The Derways Plutus is equipped with a 2.5-liter turbocharged diesel engine, with a code of 4JA1L. This engine is designed to provide a balance between power and efficiency, with a focus on reliability and longevity. However, like any engine, it may encounter certain issues during its lifespan.

One of the most common problems with the 2.5-liter diesel engine is fuel injection system issues. The fuel injectors may become clogged or damaged over time, resulting in reduced fuel efficiency, power loss, and even engine misfires. Regular maintenance, including fuel system cleaning, can help prevent these issues.

Another common problem is related to the engine's cooling system. The radiator may become clogged or damaged, leading to engine overheating and potential engine damage. It's important to regularly inspect the cooling system, replace the coolant as recommended, and ensure the radiator is free from debris or damage.

In some cases, the turbocharger may also experience issues. This can include turbo lag, where the turbocharger takes longer than usual to spool up and provide power, or even complete turbo failure. Regular oil changes and maintenance of the turbocharger can help prevent these issues.

Finally, some owners have reported issues with excessive engine oil consumption in the 2.5-liter diesel engine. This can be caused by a number of factors, including worn piston rings or valve seals, or even a damaged cylinder head gasket. Regular oil changes and maintenance can help prevent these issues, and it's important to address any oil consumption issues promptly to avoid potential engine damage.

4.4. 2.2-liter gasoline engine (code: 491Q-ME)

The Derways Plutus was also equipped with a 2.2-liter gasoline engine with a code of 491Q-ME. This engine was capable of producing 106 horsepower at 5600 rpm and 157 Nm of torque at 3400 rpm. However, this engine also had its fair share of issues.

One of the most common issues with the 2.2-liter engine is related to the timing belt. The timing belt is an essential component of the engine that connects the crankshaft and the camshaft. It is responsible for keeping the engine's valves in sync with the pistons, ensuring that the engine runs smoothly. However, if the timing belt fails or slips, it can cause significant damage to the engine, including bent valves and damaged pistons.

Another issue with the 2.2-liter engine is related to the oil system. Some owners have reported oil leaks from the engine, which can lead to low oil levels and potentially cause engine damage. Additionally, some owners have reported that the engine burns oil at a higher rate than expected, leading to the need for more frequent oil changes.

Finally, some owners have reported issues with the engine's fuel system. Specifically, some owners have reported that the engine's fuel injectors can become clogged, leading to rough idling and poor acceleration. Additionally, some owners have reported that the engine's fuel pump can fail prematurely, leading to a loss of power and potential engine damage.

Overall, while the 2.2-liter gasoline engine in the Derways Plutus is capable of providing adequate performance, it does have some known issues that owners should be aware of. Regular maintenance, including oil changes and timing belt replacement, can help mitigate these issues and ensure the longevity of the engine.

5. Common issues by system

5.1. Engine system

The Derways Plutus is a robust vehicle designed to tackle rough terrains and heavy loads, but like any other car, it's prone to issues. One of the most critical systems in any vehicle is the engine system, and the Derways Plutus is no exception. The engine system is responsible for generating power and propelling the car forward, and any malfunction can lead to a breakdown.

One common issue with the Derways Plutus engine system is the fuel delivery system. The fuel delivery system comprises several components, including the fuel pump, fuel filter, and fuel injectors. Over time, these components may become clogged or damaged, leading to reduced engine performance, rough idling, and even stalling. Regular maintenance of the fuel delivery system, including fuel filter replacement and fuel injector cleaning, can help prevent these issues.

Another common issue with the Derways Plutus engine system is overheating. Overheating can be caused by a variety of factors, including a malfunctioning thermostat, a clogged radiator, or a malfunctioning water pump. When the engine overheats, it can cause severe damage to the engine components, including the head gasket and pistons. Regular maintenance of the cooling system, including coolant flushes and radiator cleaning, can help prevent overheating.

In addition to these issues, the Derways Plutus engine system may also experience problems with the ignition system, including faulty spark plugs and ignition coils. A malfunctioning ignition system can cause poor fuel economy, reduced engine performance, and even engine misfires. Regular maintenance of the ignition system, including spark plug replacement, can help prevent these issues.

Lastly, the Derways Plutus engine system may also experience issues with the emissions control system. The emissions control system is responsible for reducing harmful emissions and includes components such as the catalytic converter and oxygen sensors. When these components fail, it can cause the check engine light to turn on and lead to reduced engine performance. Regular maintenance of the emissions control system, including catalytic converter cleaning and oxygen sensor replacement, can help prevent these issues.

5.2. Transmission system

The transmission system of Derways Plutus can also face certain issues, especially with older models. One common problem is the failure of the clutch, which may result in difficulty in shifting gears or the inability to shift gears altogether. This can be caused by a worn-out clutch plate or a malfunctioning clutch cable.

Another issue that may arise in the transmission system is a slipping or jerking sensation while shifting gears. This may be caused by a faulty torque converter, worn-out gears or synchronizers, or low transmission fluid levels. A delay in gear engagement may also be observed, which can indicate a problem with the transmission solenoid or valve body.

In some cases, the transmission may fail completely, which can be caused by various factors such as overheating, fluid contamination, or worn-out internal components. This may require a complete transmission rebuild or replacement, which can be costly.

It is important to regularly check and maintain the transmission system of Derways Plutus to prevent such issues from arising. This includes checking the transmission fluid level and quality, replacing the filter and fluid as recommended by the manufacturer, and addressing any problems immediately before they escalate into more significant issues.

Overall, while the transmission system of Derways Plutus may face some common issues, regular maintenance and timely repairs can help keep it running smoothly and efficiently.

5.3. Suspension system

The suspension system of the Derways Plutus can face several common issues. One of the most reported problems is the front suspension. The front lower arm bushings can wear out quickly, leading to a knocking sound and a loose feeling in the steering. The strut mounts can also become worn or damaged, leading to a rough ride and difficulty in steering. The rear suspension can also develop problems, with the rear leaf springs being a common issue. The leaf springs can break, leading to a loss of control over the vehicle.

Another issue that can arise with the suspension system is the shock absorbers. The shock absorbers can wear out or become damaged, leading to a bumpy ride and reduced stability on the road. In addition, the ball joints can also become worn, leading to a loose feeling in the steering and reduced stability.

The suspension system is crucial to the overall stability and safety of the vehicle, and it is essential to address any issues as soon as they arise. Regular maintenance and inspections can help prevent these problems from occurring and ensure the suspension system is in good working condition.

5.4. Electrical system

The electrical system of the Derways Plutus may also encounter some issues. One of the most common issues is related to the battery. Some owners have reported that the battery does not hold a charge for very long and needs to be replaced frequently. The alternator may also fail, causing the battery to drain and the vehicle to stall.

Another common issue with the electrical system is related to the wiring. Over time, the wiring harness may become brittle and crack, leading to shorts or other electrical problems. This can be particularly problematic if the wiring harness is in a location that is difficult to access or repair.

In addition, the electronic components of the vehicle, such as the engine control module (ECM), may also fail. This can lead to a wide range of problems, including reduced engine performance, stalling, and even complete engine failure.

Finally, some owners have reported issues with the vehicle's lighting system. This can include problems with the headlights, turn signals, and brake lights. In some cases, the bulbs may need to be replaced, while in others, the wiring or the lighting control module may be the root cause of the issue.

Overall, while the electrical system of the Derways Plutus is generally reliable, it is important to be aware of these potential issues and to address them promptly to avoid more serious problems down the line. Regular maintenance and inspections can help to identify and address these issues before they become more serious.

6. Common maintenance tasks

6.1. Oil changes

Regular oil changes are an essential part of maintaining the Derways Plutus. It is recommended to change the oil every 5,000 to 7,500 miles, depending on the manufacturer's instructions. Fresh oil helps to lubricate the engine's moving parts, reduce friction and wear, and remove contaminants and debris from the engine.

Neglecting to change the oil regularly can result in poor engine performance, decreased fuel efficiency, and engine damage. Over time, oil breaks down and loses its ability to lubricate, causing increased friction and wear on engine components. This can result in costly repairs or even engine failure.

When performing an oil change on a Derways Plutus, it is important to use the recommended type and weight of oil specified by the manufacturer. Using the wrong type of oil or the incorrect weight can also cause engine damage and reduced performance.

In addition to changing the oil, it is also recommended to replace the oil filter at the same time. The oil filter helps to remove contaminants from the oil, and a clogged or dirty filter can reduce the effectiveness of the oil in lubricating the engine.

Regular oil changes and filter replacements are simple yet crucial maintenance tasks that can help keep your Derways Plutus running smoothly and extend its lifespan.

6.2. Timing belt replacement

Replacing the timing belt is a common maintenance task for any vehicle, including the Derways Plutus. The timing belt is a critical component of the engine that ensures the proper timing of the engine's valves and pistons. Over time, the timing belt can wear down or break, which can lead to serious engine damage if not addressed promptly.

The recommended interval for replacing the timing belt on the Derways Plutus varies depending on the engine type and year of production. Generally, it is recommended to replace the timing belt every 60,000 to 100,000 kilometers or 5 to 8 years. However, it is important to check the manufacturer's recommendations for the specific model and year of the vehicle.

If the timing belt on a Derways Plutus breaks, it can cause serious engine damage, including bent valves, damaged pistons, and damaged cylinder heads. Replacing the timing belt is a complex and labor-intensive task that should only be performed by a qualified mechanic with experience working on Derways Plutus vehicles.

In addition to replacing the timing belt, it is also important to replace other components of the timing belt system, such as the tensioner, idler pulleys, and water pump. These components can wear down over time and can cause the timing belt to fail prematurely if not replaced.

Overall, replacing the timing belt is an important part of regular maintenance for the Derways Plutus. It can help prevent serious engine damage and keep the vehicle running smoothly and reliably for many years.

6.3. Brake system maintenance

The brake system is an essential component of any vehicle, and proper maintenance of the brake system is crucial to ensure the safety of the vehicle and its passengers. Derways Plutus is no exception, and regular brake system maintenance is necessary to ensure optimal brake performance and longevity.

Common brake system maintenance tasks for the Derways Plutus include brake pad replacement, brake rotor resurfacing or replacement, brake fluid flush, and inspection of brake lines and hoses. Over time, the brake pads wear down and need to be replaced, and the rotors may become warped or damaged, requiring resurfacing or replacement. A brake fluid flush is necessary every few years to remove any moisture or contaminants from the brake fluid, which can affect brake performance. Additionally, the brake lines and hoses should be inspected regularly for any signs of wear, damage, or leaks.

It is important to follow the manufacturer's recommended maintenance schedule for the brake system to ensure optimal performance and safety. Regular brake system maintenance can also help prevent more costly repairs down the line, as neglecting the brake system can cause damage to other components, such as the calipers or master cylinder.

6.4. Suspension system maintenance

Proper maintenance of the suspension system is crucial to ensure a safe and smooth driving experience in the Derways Plutus. Regular inspection of the suspension system is essential to identify any wear or damage to components such as shock absorbers, springs, and bushings. These parts can wear out over time, leading to a rough ride, poor handling, and reduced safety.

One important maintenance task for the suspension system is ensuring proper tire inflation. Underinflated tires can cause excessive wear on the suspension components and reduce fuel efficiency. Overinflated tires, on the other hand, can cause a harsh ride and reduce tire life.

Another important maintenance task is lubrication of the suspension system components. Lubrication prevents metal-to-metal contact and reduces wear on the parts. It is recommended to lubricate the suspension components with a suitable lubricant during regular maintenance intervals.

Replacing worn or damaged suspension components is also an important part of suspension system maintenance. Worn or damaged components can affect vehicle stability, handling, and ride quality. Regular inspection and replacement of suspension components such as shock absorbers, springs, and bushings can help ensure the safe and smooth operation of the Derways Plutus.

7. How to troubleshoot issues

7.1. Check engine light

The check engine light in the Derways Plutus is an important diagnostic tool that alerts drivers to potential issues with the vehicle's systems. If the check engine light comes on while driving, it is important to address the issue promptly to avoid further damage and costly repairs.

One common cause of the check engine light in the Plutus is a faulty oxygen sensor. The oxygen sensor monitors the amount of oxygen in the exhaust and communicates with the engine control module (ECM) to adjust the air-fuel mixture for optimal performance. A faulty sensor can cause the ECM to adjust the air-fuel mixture incorrectly, leading to decreased fuel economy and increased emissions.

Another common cause of the check engine light is a malfunctioning catalytic converter. The catalytic converter is responsible for reducing harmful emissions in the exhaust. A malfunctioning converter can cause decreased performance and increased emissions.

To troubleshoot issues with the check engine light in the Derways Plutus, a diagnostic scan tool can be used to read the codes stored in the ECM. These codes provide information about the specific system or component that is experiencing an issue. Once the code has been read, the issue can be identified and addressed by a qualified mechanic.

In some cases, the check engine light may come on due to a minor issue, such as a loose gas cap. In these cases, tightening the gas cap and driving for a short period of time may reset the light. However, if the light persists, it is important to have the vehicle inspected by a professional.

Overall, it is important for drivers to pay attention to the check engine light in the Derways Plutus and address any issues promptly to ensure optimal performance and prevent costly repairs.

7.2. Fluid leaks

Fluid leaks can be a common issue in many vehicles, including the Derways Plutus. The presence of a fluid leak can indicate a problem with the vehicle's engine or transmission systems. One of the most common fluid leaks is oil leaking from the engine. This can be caused by a damaged oil pan or oil filter, a worn-out gasket, or a damaged seal. In addition to oil leaks, the Plutus may also experience transmission fluid leaks, which can be caused by a damaged or worn-out transmission pan, gasket, or seal.

To troubleshoot fluid leaks in the Plutus, it's important to first identify the type of fluid that is leaking. Different fluids have different colors and consistencies, which can help narrow down the source of the leak. For example, engine oil is usually brown or black and has a thick, sticky consistency, while transmission fluid is often red or pink and has a thin, watery consistency.

Once the type of fluid has been identified, the next step is to inspect the area where the leak is occurring. This may involve checking underneath the vehicle or opening up the hood to inspect the engine compartment. Look for signs of fluid on the ground or on engine components, such as the oil pan or transmission.

If a fluid leak is detected, it's important to address the issue as soon as possible. Driving with a fluid leak can cause damage to the engine or transmission systems, and can lead to costly repairs in the long run. Repairs for fluid leaks may involve replacing damaged components, such as gaskets, seals, or pans, or tightening loose connections. In some cases, a professional mechanic may need to be consulted to diagnose and repair the issue.

Regular maintenance, such as regular oil changes and transmission fluid changes, can help prevent fluid leaks in the Plutus. In addition, inspecting the vehicle for signs of leaks and addressing them promptly can help ensure the vehicle continues to run smoothly and avoid potential issues down the road.

7.3. Unusual noises

Derways Plutus owners may sometimes hear unusual noises coming from their vehicle. These noises could indicate a range of issues, from minor problems to major malfunctions. Therefore, it is important to troubleshoot the issue as soon as possible to prevent further damage to the vehicle.

One of the most common unusual noises that owners may encounter is a rattling or knocking sound coming from the engine. This could be a sign of a worn-out or damaged engine bearing, which can lead to serious engine damage if not addressed promptly. Another possible cause of engine noises is a loose or damaged timing belt, which may produce a whining or screeching sound.

Another area where unusual noises can be heard is the suspension system. A squeaking or creaking sound while driving over bumps or rough terrain could be an indication of worn-out or damaged suspension components, such as shocks, struts, or bushings. A clicking or popping sound when turning could indicate a problem with the CV joint or axle.

Furthermore, owners may hear a high-pitched whistling sound from their vehicle, which may be caused by a damaged or leaky vacuum hose. A grinding noise when applying the brakes could indicate worn-out brake pads or rotors, which should be replaced immediately.

To troubleshoot unusual noises, owners should first try to identify the source of the noise and when it occurs. They should listen carefully to the sound and try to describe it as accurately as possible. If the issue persists, it is recommended to take the vehicle to a qualified mechanic for further inspection and repair.

7.4. Poor performance or handling

If you notice poor performance or handling in your Derways Plutus, it can be due to a number of issues. One of the most common causes is worn suspension components, such as shocks, struts, or bushings. When these parts wear out, it can lead to a rough ride, poor handling, and even unsafe driving conditions.

Another common cause of poor performance is a dirty air filter. A dirty air filter can reduce airflow to the engine, which can cause a reduction in performance and fuel economy. Additionally, a clogged fuel filter can cause similar issues, as it can reduce fuel flow to the engine.

If your Plutus is exhibiting poor acceleration or a lack of power, it could be due to a malfunctioning sensor or a clogged fuel injector. A faulty sensor, such as the mass airflow sensor, can cause incorrect readings to be sent to the engine control module, which can result in poor performance. A clogged fuel injector can cause a reduction in fuel flow to the engine, leading to similar issues.

Finally, poor performance can also be caused by a malfunctioning transmission. If you notice slipping gears, delayed shifting, or rough shifting, it may be time to have your transmission inspected and repaired.

To troubleshoot issues related to poor performance or handling, it is recommended to have your Plutus inspected by a professional mechanic. They can diagnose the issue and provide a recommended course of action to improve your vehicle's performance and handling.

8. When to seek professional help

While performing routine maintenance and troubleshooting issues, it is important to recognize when it is time to seek professional help for your Derways Plutus. Here are some situations in which seeking professional assistance is recommended:

1. Complex repairs: If a repair requires specialized tools or knowledge, it is best to leave it to the professionals. Attempting to do it yourself could lead to further damage and even more costly repairs.

2. Safety concerns: If you notice any issues with the brakes, steering, or suspension system that affect your vehicle's safety, it is essential to seek professional help immediately. Ignoring these issues could lead to accidents and injuries.

3. Warranty repairs: If your vehicle is still under warranty, it is advisable to take it to an authorized service center for any repairs. Attempting to repair the vehicle yourself or taking it to an unauthorized service center could void the warranty.

4. Electrical issues: Electrical problems in vehicles can be complex and difficult to diagnose. Seeking professional help from a qualified technician can help ensure the issue is resolved correctly the first time.

5. Unusual noises or vibrations: If you notice any unusual noises or vibrations while driving, it is important to have your vehicle inspected by a professional. These issues could be an indication of a more significant problem that needs to be addressed promptly.

9. Conclusion

As we have seen throughout this discussion of the Derways Plutus, there are many potential issues that can arise with this vehicle. Whether it is specific issues with the engine, transmission, suspension, or electrical system, or more general maintenance tasks like oil changes and brake system maintenance, it is clear that owning and maintaining a Plutus requires a certain level of knowledge and expertise.

Fortunately, there are many resources available for those who need help troubleshooting issues with their Plutus. Whether you turn to online forums, owner's manuals, or professional mechanics, there is no shortage of information available to help you keep your vehicle running smoothly.

Ultimately, the key to keeping your Plutus in good condition is to stay on top of maintenance tasks, be aware of potential issues, and seek professional help when necessary. By taking care of your vehicle and addressing issues promptly, you can ensure that your Plutus will serve you well for many years to come.

Example List of Derways Plutus Engine Error Codes and Descriptions

Engine Code/NameEngine Specs (L, Fuel, HP)Part CarError CodeDescription
1.5L Gasoline1.5L, Gasoline, 111 HPFuel SystemP0171System too lean (Bank 1)
1.5L Gasoline1.5L, Gasoline, 111 HPFuel SystemP0174System too lean (Bank 2)
1.5L Gasoline1.5L, Gasoline, 111 HPEngineP0300Random/Multiple Cylinder Misfire Detected
1.5L Gasoline1.5L, Gasoline, 111 HPEngineP0301Cylinder 1 Misfire Detected
1.5L Gasoline1.5L, Gasoline, 111 HPEngineP0302Cylinder 2 Misfire Detected
1.5L Gasoline1.5L, Gasoline, 111 HPEngineP0303Cylinder 3 Misfire Detected
1.5L Gasoline1.5L, Gasoline, 111 HPEngineP0304Cylinder 4 Misfire Detected
1.5L Gasoline1.5L, Gasoline, 111 HPExhaust SystemP0420Catalyst System Efficiency Below Threshold (Bank 1)
1.5L Gasoline1.5L, Gasoline, 111 HPExhaust SystemP0430Catalyst System Efficiency Below Threshold (Bank 2)
1.5L Gasoline1.5L, Gasoline, 111 HPTransmissionP0705Transmission Range Sensor Circuit Malfunction
2.0L Diesel2.0L, Diesel, 141 HPFuel SystemP0093Fuel System Leak Detected - Large Leak
2.0L Diesel2.0L, Diesel, 141 HPFuel SystemP0098Intake Air Temperature Sensor 2 Circuit High
2.0L Diesel2.0L, Diesel, 141 HPEngineP0401Exhaust Gas Recirculation Flow Insufficient Detected
2.0L Diesel2.0L, Diesel, 141 HPEngineP0402Exhaust Gas Recirculation Flow Excessive Detected
2.0L Diesel2.0L, Diesel, 141 HPEngineP0403Exhaust Gas Recirculation Control Circuit
2.0L Diesel2.0L, Diesel, 141 HPEngineP0488EGR Throttle Position Control Range/Performance
2.4L Gasoline2.4L, Gasoline, 140 HPFuel SystemP0171System too lean (Bank 1)
2.4L Gasoline2.4L, Gasoline, 140 HPFuel SystemP0174System too lean (Bank 2)
2.4L Gasoline2.4L, Gasoline, 140 HPEngineP0300Random/Multiple Cylinder Misfire Detected
2.4L Gasoline2.4L, Gasoline, 140 HPEngineP0301Cylinder 1 Misfire Detected
2.4L Gasoline2.4L, Gasoline, 140 HPEngineP0302Cylinder 2 Misfire Detected
2.4L Gasoline2.4L, Gasoline, 140 HPEngineP0303Cylinder 3 Misfire Detected
2.4L Gasoline2.4L, Gasoline, 140 HPEngineP0304Cylinder 4 Misfire Detected
2.4L Gasoline2.4L, Gasoline, 140 HPExhaust SystemP0420Catalyst System Efficiency Below Threshold (Bank 1)
2.4L Gasoline2.4L, Gasoline, 140 HPExhaust SystemP0430Catalyst System Efficiency Below Threshold (Bank 2)
2.8L Diesel2.8L, Diesel, 130 HPFuel SystemP0087Fuel Rail/System Pressure Too Low
2.8L Diesel2.8L, Diesel, 130 HPFuel SystemP0093Fuel System Leak Detected - Large Leak
2.8L Diesel2.8L, Diesel, 130 HPEngineP0118Engine Coolant Temperature Circuit High Input
2.8L Diesel2.8L, Diesel, 130 HPEngineP0401Exhaust Gas Recirculation Flow Insufficient Detected
2.8L Diesel2.8L, Diesel, 130 HPEngineP0402Exhaust Gas Recirculation Flow Excessive Detected
2.8L Diesel2.8L, Diesel, 130 HPEngineP0403Exhaust Gas Recirculation Control Circuit
2.8L Diesel2.8L, Diesel, 130 HPEngineP0488EGR Throttle Position Control Range/Performance
2.0L Gasoline2.0L, Gasoline, 136 HPFuel SystemP0171System too lean (Bank 1)
2.0L Gasoline2.0L, Gasoline, 136 HPFuel SystemP0174System too lean (Bank 2)
2.0L Gasoline2.0L, Gasoline, 136 HPEngineP0300Random/Multiple Cylinder Misfire Detected
2.0L Gasoline2.0L, Gasoline, 136 HPEngineP0301Cylinder 1 Misfire Detected
2.0L Gasoline2.0L, Gasoline, 136 HPEngineP0302Cylinder 2 Misfire Detected
2.0L Gasoline2.0L, Gasoline, 136 HPEngineP0303Cylinder 3 Misfire Detected
2.0L Gasoline2.0L, Gasoline, 136 HPEngineP0304Cylinder 4 Misfire Detected
2.0L Gasoline2.0L, Gasoline, 136 HPExhaust SystemP0420Catalyst System Efficiency Below Threshold (Bank 1)
2.0L Gasoline2.0L, Gasoline, 136 HPExhaust SystemP0430Catalyst System Efficiency Below Threshold (Bank 2)
2.0L Diesel2.0L, Diesel, 150 HPFuel SystemP0087Fuel Rail/System Pressure Too Low
2.0L Diesel2.0L, Diesel, 150 HPFuel SystemP0093Fuel System Leak Detected - Large Leak
2.0L Diesel2.0L, Diesel, 150 HPEngineP0118Engine Coolant Temperature Circuit High Input
2.0L Diesel2.0L, Diesel, 150 HPEngineP0401Exhaust Gas Recirculation Flow Insufficient Detected
2.0L Diesel2.0L, Diesel, 150 HPEngineP0402Exhaust Gas Recirculation Flow Excessive Detected
2.0L Diesel2.0L, Diesel, 150 HPEngineP0403Exhaust Gas Recirculation Control Circuit
2.0L Diesel2.0L, Diesel, 150 HPEngineP0488EGR Throttle Position Control Range/Performance
2.5L Diesel2.5L, Diesel, 136 HPFuel SystemP0087Fuel Rail/System Pressure Too Low
2.5L Diesel2.5L, Diesel, 136 HPFuel SystemP0093Fuel System Leak Detected - Large Leak
2.5L Diesel2.5L, Diesel, 136 HPEngineP0118Engine Coolant Temperature Circuit High Input
2.5L Diesel2.5L, Diesel, 136 HPEngineP0401Exhaust Gas Recirculation Flow Insufficient Detected
2.5L Diesel2.5L, Diesel, 136 HPEngineP0402Exhaust Gas Recirculation Flow Excessive Detected
2.5L Diesel2.5L, Diesel, 136 HPEngineP0403Exhaust Gas Recirculation Control Circuit
2.5L Diesel2.5L, Diesel, 136 HPEngineP0488EGR Throttle Position Control Range/Performance
2.5L Diesel2.5L, Diesel, 136 HPTransmissionP0730Incorrect Gear Ratio
2.5L Diesel2.5L, Diesel, 136 HPTransmissionP0750Shift Solenoid A Malfunction
2.5L Diesel2.5L, Diesel, 136 HPTransmissionP0755Shift Solenoid B Malfunction
2.8L Diesel2.8L, Diesel, 148 HPFuel SystemP0088Fuel Rail/System Pressure Too High
2.8L Diesel2.8L, Diesel, 148 HPFuel SystemP0090Fuel Pressure Regulator 1 Control Circuit
2.8L Diesel2.8L, Diesel, 148 HPEngineP0113Intake Air Temperature Circuit High Input
2.8L Diesel2.8L, Diesel, 148 HPEngineP0116Engine Coolant Temperature Circuit Range/Performance
2.8L Diesel2.8L, Diesel, 148 HPEngineP0117Engine Coolant Temperature Circuit Low Input
2.8L Diesel2.8L, Diesel, 148 HPEngineP0234Turbocharger/Supercharger Overboost Condition
2.8L Diesel2.8L, Diesel, 148 HPEngineP0341Camshaft Position Sensor Circuit Range/Performance
2.8L Diesel2.8L, Diesel, 148 HPTransmissionP0715Input/Turbine Speed Sensor Circuit Malfunction
2.8L Diesel2.8L, Diesel, 148 HPTransmissionP0760Shift Solenoid C Malfunction
2.8L Diesel2.8L, Diesel, 148 HPTransmissionP07833-4 Shift Malfunction
2.0L Petrol2.0L, Petrol, 135 HPFuel SystemP0171System Too Lean (Bank 1)
2.0L Petrol2.0L, Petrol, 135 HPFuel SystemP0172System Too Rich (Bank 1)
2.0L Petrol2.0L, Petrol, 135 HPEngineP0300Random/Multiple Cylinder Misfire Detected
2.0L Petrol2.0L, Petrol, 135 HPEngineP0301Cylinder 1 Misfire Detected
2.0L Petrol2.0L, Petrol, 135 HPEngineP0302Cylinder 2 Misfire Detected
2.0L Petrol2.0L, Petrol, 135 HPEngineP0328Knock Sensor 1 Circuit High Input (Bank 1 or Single Sensor)
2.0L Petrol2.0L, Petrol, 135 HPEngineP0335Crankshaft Position Sensor "A" Circuit Malfunction
2.0L Petrol2.0L, Petrol, 135 HPTransmissionP0700Transmission Control System (MIL Request)
2.0L Petrol2.0L, Petrol, 135 HPTransmissionP0733Gear 3 Incorrect Ratio
2.0L Petrol2.0L, Petrol, 135 HPTransmissionP0741Torque Converter Clutch Circuit Performance or Stuck Off
2.4L Petrol2.4L, Petrol, 143 HPFuel SystemP0191Fuel Rail Pressure Sensor Circuit Range/Performance
2.4L Petrol2.4L, Petrol, 143 HPFuel SystemP0304Cylinder 4 Misfire Detected
2.4L Petrol2.4L, Petrol, 143 HPEngineP0403Exhaust Gas Recirculation Circuit Malfunction
2.4L Petrol2.4L, Petrol, 143 HPEngineP0420Catalyst System Efficiency Below Threshold (Bank 1)
2.4L Petrol2.4L, Petrol, 143 HPEngineP0442Evaporative Emission System Leak Detected (Small Leak)
2.4L Petrol2.4L, Petrol, 143 HPEngineP0500Vehicle Speed Sensor "A" Circuit Malfunction
2.4L Petrol2.4L, Petrol, 143 HPTransmissionP0750Shift Solenoid A Malfunction
2.4L Petrol2.4L, Petrol, 143 HPTransmissionP0755Shift Solenoid B Malfunction
2.4L Petrol2.4L, Petrol, 143 HPTransmissionP0770Shift Solenoid E Malfunction
2.8L Diesel2.8L, Diesel, 125 HPFuel SystemP0087Fuel Rail/System Pressure Too Low
2.8L Diesel2.8L, Diesel, 125 HPFuel SystemP0093Fuel System Leak Detected - Large Leak
2.8L Diesel2.8L, Diesel, 125 HPEngineP0101Mass or Volume Air Flow Circuit Range/Performance Problem
2.8L Diesel2.8L, Diesel, 125 HPEngineP0113Intake Air Temperature Circuit High Input
2.8L Diesel2.8L, Diesel, 125 HPEngineP0401Exhaust Gas Recirculation Flow Insufficient Detected
2.8L Diesel2.8L, Diesel, 125 HPEngineP0483Cooling Fan Rationality Check Malfunction
2.8L Diesel2.8L, Diesel, 125 HPTransmissionP0793Intermediate Shaft Speed Sensor Circuit No Signal
2.8L Diesel2.8L, Diesel, 125 HPTransmissionP0794Intermediate Shaft Speed Sensor Circuit Intermittent
2.0L Petrol2.0L, Petrol, 135 HPFuel SystemP0193Fuel Rail Pressure Sensor Circuit High Input
2.0L Petrol2.0L, Petrol, 135 HPFuel SystemP0171System Too Lean (Bank 1)
2.0L Petrol2.0L, Petrol, 135 HPEngineP0300Random/Multiple Cylinder Misfire Detected
2.0L Petrol2.0L, Petrol, 135 HPEngineP0325Knock Sensor 1 Circuit Malfunction (Bank 1 or Single Sensor)
2.0L Petrol2.0L, Petrol, 135 HPEngineP0421Warm Up Catalyst Efficiency Below Threshold (Bank 1)
2.0L Petrol2.0L, Petrol, 135 HPEngineP0441Evaporative Emission Control System Incorrect Purge Flow
2.0L Petrol2.0L, Petrol, 135 HPTransmissionP0700Transmission Control System Malfunction
2.0L Petrol2.0L, Petrol, 135 HPTransmissionP0741Torque Converter Clutch Circuit Performance or Stuck Off
2.3L Petrol2.3L, Petrol, 150 HPFuel SystemP0088Fuel Rail/System Pressure Too High
2.3L Petrol2.3L, Petrol, 150 HPFuel SystemP0192Fuel Rail Pressure Sensor Circuit Low Input
2.3L Petrol2.3L, Petrol, 150 HPEngineP0118Engine Coolant Temperature Circuit High Input
2.3L Petrol2.3L, Petrol, 150 HPEngineP0302Cylinder 2 Misfire Detected
2.3L Petrol2.3L, Petrol, 150 HPEngineP0420Catalyst System Efficiency Below Threshold (Bank 1)
2.3L Petrol2.3L, Petrol, 150 HPEngineP0455Evaporative Emission Control System Leak Detected (Gross Leak/No Flow)
2.3L Petrol2.3L, Petrol, 150 HPTransmissionP0731Gear 1 Incorrect Ratio
2.3L Petrol2.3L, Petrol, 150 HPTransmissionP0743Torque Converter Clutch Circuit Electrical
2.8L Diesel2.8L, Diesel, 128 HPFuel SystemP0087Fuel Rail/System Pressure Too Low
2.8L Diesel2.8L, Diesel, 128 HPFuel SystemP0191Fuel Rail Pressure Sensor Circuit Range/Performance
2.8L Diesel2.8L, Diesel, 128 HPEngineP0115Engine Coolant Temperature Circuit Malfunction
2.8L Diesel2.8L, Diesel, 128 HPEngineP0340Camshaft Position Sensor Circuit Malfunction
2.8L Diesel2.8L, Diesel, 128 HPEngineP0403Exhaust Gas Recirculation Circuit Malfunction
2.8L Diesel2.8L, Diesel, 128 HPEngineP0480Cooling Fan 1 Control Circuit Malfunction
2.8L Diesel2.8L, Diesel, 128 HPTransmissionP0732Gear 2 Incorrect Ratio
2.8L Diesel2.8L, Diesel, 128 HPTransmissionP0740Torque Converter Clutch Circuit Malfunction
2.0L Petrol2.0L, Petrol, 141 HPFuel SystemP0089Fuel Pressure Regulator 1 Performance
2.0L Petrol2.0L, Petrol, 141 HPFuel SystemP0193Fuel Rail Pressure Sensor Circuit High Input
2.0L Petrol2.0L, Petrol, 141 HPEngineP0101Mass or Volume Air Flow Circuit Range/Performance Problem
2.0L Petrol2.0L, Petrol, 141 HPEngineP0303Cylinder 3 Misfire Detected
2.0L Petrol2.0L, Petrol, 141 HPEngineP0420Catalyst System Efficiency Below Threshold (Bank 1)
2.0L Petrol2.0L, Petrol, 141 HPEngineP0442Evaporative Emission Control System Leak Detected (Small Leak)
2.0L Petrol2.0L, Petrol, 141 HPTransmissionP0733Gear 3 Incorrect Ratio
2.0L Petrol2.0L, Petrol, 141 HPTransmissionP0741Torque Converter Clutch Circuit Performance or Stuck Off
2.2L Petrol2.2L, Petrol, 140 HPFuel SystemP0192Fuel Rail Pressure Sensor Circuit Low Input
2.2L Petrol2.2L, Petrol, 140 HPFuel SystemP0230Fuel Pump Primary Circuit Malfunction
2.2L Petrol2.2L, Petrol, 140 HPEngineP0121Throttle/Pedal Position Sensor/Switch A Circuit Range/Performance Problem
2.2L Petrol2.2L, Petrol, 140 HPEngineP0304Cylinder 4 Misfire Detected
2.2L Petrol2.2L, Petrol, 140 HPEngineP0420Catalyst System Efficiency Below Threshold (Bank 1)
2.2L Petrol2.2L, Petrol, 140 HPEngineP0446Evaporative Emission Control System Vent Control Circuit Malfunction
2.2L Petrol2.2L, Petrol, 140 HPTransmissionP0734Gear 4 Incorrect Ratio
2.2L Petrol2.2L, Petrol, 140 HPTransmissionP0742Torque Converter Clutch Circuit Stuck On
2.8L Diesel2.8L, Diesel, 132 HPFuel SystemP0090Fuel Pressure Regulator 1 Control Circuit
2.8L Diesel2.8L, Diesel, 132 HPFuel SystemP0191Fuel Rail Pressure Sensor Circuit Range/Performance
2.8L Diesel2.8L, Diesel, 132 HPEngineP0102Mass or Volume Air Flow Circuit Low Input
2.8L Diesel2.8L, Diesel, 132 HPEngineP0302Cylinder 2 Misfire Detected
2.8L Diesel2.8L, Diesel, 132 HPEngineP0403Exhaust Gas Recirculation Circuit Malfunction
2.8L Diesel2.8L, Diesel, 132 HPEngineP0470Exhaust Pressure Sensor Circuit Malfunction
2.8L Diesel2.8L, Diesel, 132 HPTransmissionP0735Gear 5 Incorrect Ratio
2.8L Diesel2.8L, Diesel, 132 HPTransmissionP0743Torque Converter Clutch Circuit Electrical
2.0L Petrol Turbo2.0L, Petrol, 150 HPFuel SystemP0171System Too Lean (Bank 1)
2.0L Petrol Turbo2.0L, Petrol, 150 HPFuel SystemP0172System Too Rich (Bank 1)
2.0L Petrol Turbo2.0L, Petrol, 150 HPEngineP0011"A" Camshaft Position - Timing Over-Advanced or System Performance (Bank 1)
2.0L Petrol Turbo2.0L, Petrol, 150 HPEngineP0303Cylinder 3 Misfire Detected
2.0L Petrol Turbo2.0L, Petrol, 150 HPEngineP0422Main Catalyst Efficiency Below Threshold (Bank 1)
2.0L Petrol Turbo2.0L, Petrol, 150 HPEngineP0441Evaporative Emission Control System Incorrect Purge Flow
2.0L Petrol Turbo2.0L, Petrol, 150 HPTransmissionP0731Gear 1 Incorrect Ratio
2.0L Petrol Turbo2.0L, Petrol, 150 HPTransmissionP0741Torque Converter Clutch Circuit Performance or Stuck Off
2.4L Petrol2.4L, Petrol, 146 HPFuel SystemP0171System Too Lean (Bank 1)
2.4L Petrol2.4L, Petrol, 146 HPFuel SystemP0172System Too Rich (Bank 1)
2.4L Petrol2.4L, Petrol, 146 HPEngineP0301Cylinder 1 Misfire Detected
2.4L Petrol2.4L, Petrol, 146 HPEngineP0420Catalyst System Efficiency Below Threshold (Bank 1)
2.4L Petrol2.4L, Petrol, 146 HPEngineP0507Idle Control System RPM Higher Than Expected
2.4L Petrol2.4L, Petrol, 146 HPEngineP0606ECM/PCM Processor Fault
2.4L Petrol2.4L, Petrol, 146 HPTransmissionP0732Gear 2 Incorrect Ratio
2.4L Petrol2.4L, Petrol, 146 HPTransmissionP0740Torque Converter Clutch Circuit Malfunction
2.8L Diesel2.8L, Diesel, 148 HPFuel SystemP0087Fuel Rail/System Pressure Too Low
2.8L Diesel2.8L, Diesel, 148 HPFuel SystemP0088Fuel Rail/System Pressure Too High
2.8L Diesel2.8L, Diesel, 148 HPEngineP0299Turbo/Supercharger Underboost
2.8L Diesel2.8L, Diesel, 148 HPEngineP0403Exhaust Gas Recirculation Control Circuit
2.8L Diesel2.8L, Diesel, 148 HPEngineP0670Glow Plug Control Circuit Malfunction
2.8L Diesel2.8L, Diesel, 148 HPEngineP0700Transmission Control System (MIL Request)
2.8L Diesel2.8L, Diesel, 148 HPTransmissionP0733Gear 3 Incorrect Ratio
2.8L Diesel2.8L, Diesel, 148 HPTransmissionP0780Shift Malfunction
2.0L Petrol2.0L, Petrol, 143 HPFuel SystemP0171System Too Lean (Bank 1)
2.0L Petrol2.0L, Petrol, 143 HPFuel SystemP0172System Too Rich (Bank 1)
2.0L Petrol2.0L, Petrol, 143 HPEngineP0300Random/Multiple Cylinder Misfire Detected
2.0L Petrol2.0L, Petrol, 143 HPEngineP0420Catalyst System Efficiency Below Threshold (Bank 1)
2.0L Petrol2.0L, Petrol, 143 HPEngineP0506Idle Control System RPM Lower Than Expected
2.0L Petrol2.0L, Petrol, 143 HPEngineP0601ECM/PCM Memory Error
2.0L Petrol2.0L, Petrol, 143 HPTransmissionP0731Gear 1 Incorrect Ratio
2.0L Petrol2.0L, Petrol, 143 HPTransmissionP0734Gear 4 Incorrect Ratio
2.2L Petrol2.2L, Petrol, 136 HPFuel SystemP0171System Too Lean (Bank 1)
2.2L Petrol2.2L, Petrol, 136 HPFuel SystemP0172System Too Rich (Bank 1)
2.2L Petrol2.2L, Petrol, 136 HPEngineP0303Cylinder 3 Misfire Detected
2.2L Petrol2.2L, Petrol, 136 HPEngineP0327Knock Sensor 1 Circuit Low Input (Bank 1 or Single Sensor)
2.2L Petrol2.2L, Petrol, 136 HPEngineP0441Evaporative Emission Control System Incorrect Purge Flow
2.2L Petrol2.2L, Petrol, 136 HPEngineP0500Vehicle Speed Sensor Malfunction
2.2L Petrol2.2L, Petrol, 136 HPTransmissionP0732Gear 2 Incorrect Ratio
2.2L Petrol2.2L, Petrol, 136 HPTransmissionP0735Gear 5 Incorrect Ratio
2.2L Petrol2.2L, Petrol, 136 HPTransmissionP0750Shift Solenoid A Malfunction
2.2L Petrol2.2L, Petrol, 136 HPTransmissionP0755Shift Solenoid B Malfunction
2.2L Petrol2.2L, Petrol, 136 HPTransmissionP0760Shift Solenoid C Malfunction
2.2L Petrol2.2L, Petrol, 136 HPTransmissionP0765Shift Solenoid D Malfunction
2.2L Petrol2.2L, Petrol, 136 HPEngineP1135Air/Fuel Sensor Heater Circuit Response Malfunction (Bank 1 Sensor 1)
2.2L Petrol2.2L, Petrol, 136 HPEngineP1155Air/Fuel Sensor Heater Circuit Response Malfunction (Bank 2 Sensor 1)
2.2L Petrol2.2L, Petrol, 136 HPEngineP1171Air/Fuel Sensor Circuit Range/Performance (Bank 1 Sensor 1)
2.2L Petrol2.2L, Petrol, 136 HPEngineP1172Air/Fuel Sensor Circuit Range/Performance (Bank 1 Sensor 2)
2.2L Petrol2.2L, Petrol, 136 HPEngineP1300Igniter Circuit Malfunction (Bank 1 or Single Cylinder)
2.2L Petrol2.2L, Petrol, 136 HPEngineP1656OCV Circuit Malfunction (Bank 1)

Frequently Asked Questions (FAQ) About Common Issues with Derways Plutus

What are the common engine problems in Derways Plutus?

Some of the common engine problems in Derways Plutus include overheating, oil leaks, failure of sensors, and problems with the ignition system. These problems are often caused by wear and tear, lack of proper maintenance, or the use of low-quality parts.

How can I prevent overheating in my Derways Plutus?

To prevent overheating in your Derways Plutus, make sure to regularly check and top up the coolant levels. Additionally, ensure that the cooling system is free from leaks and blockages. If your car is still overheating, it may be necessary to replace the thermostat, water pump, or radiator.

What are some common transmission problems in Derways Plutus?

Some of the common transmission problems in Derways Plutus include slipping gears, difficulty in shifting, and transmission fluid leaks. These issues may be caused by worn out or damaged transmission components or low-quality transmission fluid.

What can I do if I experience slipping gears in my Derways Plutus?

If you experience slipping gears in your Derways Plutus, it may be necessary to replace the transmission fluid or the transmission filter. Additionally, worn out or damaged transmission components such as the clutch or torque converter may need to be replaced.

What are the common suspension problems in Derways Plutus?

Some of the common suspension problems in Derways Plutus include worn out shocks or struts, damaged or broken suspension components, and problems with wheel alignment. These issues can cause uneven tire wear, poor handling, and a rough ride.

How often should I get my suspension checked in my Derways Plutus?

It is recommended that you get your suspension checked at least once a year or every 12,000 miles to ensure that it is functioning properly. However, if you notice any signs of suspension problems such as uneven tire wear or a rough ride, you should have it checked as soon as possible.

What are some common electrical problems in Derways Plutus?

Some of the common electrical problems in Derways Plutus include battery failure, faulty alternators, problems with the starter motor, and issues with the wiring and fuses. These issues can cause your car to fail to start or can affect the functionality of the car's electronics.

How can I prevent battery failure in my Derways Plutus?

To prevent battery failure in your Derways Plutus, make sure to regularly check the battery's condition and terminals. Additionally, avoid leaving the lights or electronics on when the car is not running, and ensure that the alternator is functioning properly.

What should I do if my check engine light comes on in my Derways Plutus?

If your check engine light comes on in your Derways Plutus, it may indicate a variety of issues such as problems with the emissions system, oxygen sensors, or fuel system. It is recommended that you take your car to a qualified mechanic to diagnose and fix the issue.

When should I seek professional help for issues with my Derways Plutus?

You should seek professional help for issues with your Derways Plutus if you are unable to diagnose or fix the issue yourself, or if the issue is affecting the safety or functionality of your car. Additionally, if you notice any strange or unusual symptoms, such as strange noises or smells, you should have your car checked by a qualified mechanic as soon as possible.

What should I do if I notice fluid leaking from my Derways Plutus?

Fluid leaks can be a serious issue and should be addressed promptly. Depending on the type of fluid and the location of the leak, it could be a problem with the engine, transmission, brakes, or other system. It is recommended to have a mechanic inspect the vehicle as soon as possible to determine the cause of the leak and make necessary repairs.

How often should I change the oil in my Derways Plutus?

The frequency of oil changes can vary depending on the make and model of your vehicle, as well as your driving habits. It is recommended to follow the manufacturer's recommended maintenance schedule, which can typically be found in the owner's manual. As a general rule of thumb, most vehicles require an oil change every 3,000 to 5,000 miles.

What should I do if my Derways Plutus is experiencing poor performance or handling?

Poor performance or handling can be a sign of several issues, including problems with the engine, transmission, suspension, or tires. It is recommended to have a mechanic inspect the vehicle to determine the cause of the issue and make necessary repairs. Additionally, it is important to ensure that the vehicle is properly maintained, including regular oil changes, tire rotations, and suspension inspections.

How can I troubleshoot an issue with the check engine light on my Derways Plutus?

The check engine light can indicate a variety of issues, ranging from minor to major. To troubleshoot the issue, you can first check to see if the gas cap is loose or damaged, as this can sometimes trigger the light. If the gas cap is fine, it is recommended to have a mechanic perform a diagnostic test to determine the cause of the issue and make necessary repairs.

How often should I replace the timing belt on my Derways Plutus?

The timing belt is a critical component of the engine and is responsible for keeping the engine's valves and pistons in sync. It is recommended to follow the manufacturer's recommended maintenance schedule for timing belt replacement, which can typically be found in the owner's manual. As a general rule of thumb, most vehicles require a timing belt replacement every 60,000 to 100,000 miles.

When should I seek professional help for issues with my Derways Plutus?

If you are experiencing issues with your Derways Plutus, it is recommended to seek professional help if you are unable to diagnose or fix the issue on your own. Additionally, if you notice any unusual noises, smells, or performance issues, it is best to have a mechanic inspect the vehicle as soon as possible to prevent further damage or safety issues.

How often should I change the oil in my Derways Plutus?

It is recommended to change the oil in your Derways Plutus every 5,000 to 7,500 miles, or every 6 months, whichever comes first. It is important to follow the manufacturer's guidelines to keep your engine running smoothly and avoid damage.

What type of oil should I use in my Derways Plutus?

The recommended oil for Derways Plutus varies depending on the model and engine type. It is important to consult the owner's manual or a professional mechanic to determine the correct oil for your specific vehicle.

How often should I replace my Derways Plutus timing belt?

The timing belt in your Derways Plutus should be replaced every 60,000 to 100,000 miles, depending on the model and engine type. It is important to follow the manufacturer's guidelines and have the belt replaced in a timely manner to avoid costly engine damage.

What should I do if my Derways Plutus check engine light comes on?

If the check engine light comes on in your Derways Plutus, it is important to have the vehicle inspected by a professional mechanic. The light can indicate a wide range of issues, from minor problems to serious engine damage. Ignoring the check engine light can result in costly repairs and reduced vehicle performance.

What are some common suspension issues in the Derways Plutus?

Some common suspension issues in the Derways Plutus include worn shocks or struts, worn bushings or ball joints, and uneven tire wear. It is important to have the suspension inspected regularly and any necessary repairs made to ensure proper vehicle handling and safety.

How often should I have my Derways Plutus brakes serviced?

It is recommended to have your Derways Plutus brakes serviced every 25,000 miles or as recommended by the manufacturer. Regular brake service can help prevent costly repairs and ensure safe vehicle operation.

What are some common electrical issues in the Derways Plutus?

Some common electrical issues in the Derways Plutus include battery failure, alternator failure, and faulty wiring. It is important to have any electrical issues inspected and repaired by a professional mechanic to avoid damage to the vehicle's electrical system.

How can I troubleshoot poor performance or handling in my Derways Plutus?

Poor performance or handling in your Derways Plutus can be caused by a number of factors, including worn tires, suspension issues, or engine problems. It is important to have the vehicle inspected by a professional mechanic to diagnose and address any underlying issues.

When should I seek professional help with my Derways Plutus issues?

It is recommended to seek professional help with any Derways Plutus issues as soon as possible to avoid further damage or safety risks. It is especially important to seek professional help with issues such as check engine lights or brake problems, as they can have serious consequences if left unaddressed.

How can I troubleshoot a fluid leak issue in my Derways Plutus?

The first step is to identify the type of fluid that is leaking. For example, if it's oil, it could be a problem with the oil pan gasket, oil filter, or even the oil pressure sending unit. If it's coolant, it could be a leaky radiator or a failing water pump. Transmission fluid leaks could be caused by a faulty transmission pan gasket, while brake fluid leaks could be due to damaged brake lines or calipers. Once you've identified the type of fluid, take your car to a mechanic to diagnose and fix the issue.

What can I do if my Derways Plutus is not performing as well as it used to?

There are several possible causes for poor performance, including dirty air filters, clogged fuel injectors, worn spark plugs, or even a failing catalytic converter. You should first try to replace the air filter and spark plugs, and clean the fuel injectors to see if that improves performance. If not, you may need to take your car to a mechanic to diagnose and fix the issue.

What should I do if the check engine light comes on in my Derways Plutus?

The check engine light can come on for a variety of reasons, including a loose gas cap, a faulty oxygen sensor, or a failing catalytic converter. You should first check the gas cap to make sure it's properly tightened, as this is a common cause of the check engine light. If that doesn't solve the problem, you can take your car to an auto parts store to have the error code read. From there, you can decide whether to fix the issue yourself or take it to a mechanic.

How often should I change the oil in my Derways Plutus?

The recommended oil change interval for the Derways Plutus is every 5,000 kilometers or every 6 months, whichever comes first. However, if you frequently drive in harsh conditions, such as dusty roads or extreme temperatures, you may need to change your oil more frequently.

What should I do if I notice a strange noise coming from my Derways Plutus?

Strange noises can be caused by a variety of issues, including worn brake pads, a failing water pump, or a loose belt. You should first try to identify where the noise is coming from, and what it sounds like. From there, you can consult your owner's manual or take your car to a mechanic to diagnose and fix the issue.

How often should I replace my Derways Plutus' timing belt?

The timing belt in the Derways Plutus should be replaced every 60,000 kilometers or every 3 years, whichever comes first. Failing to replace the timing belt on schedule can cause severe engine damage, so it's important to follow the recommended maintenance schedule.

How often should I change the oil in my Derways Plutus?

It is recommended to change the oil in your Derways Plutus every 5,000 to 7,500 miles or every six months, whichever comes first. However, this can vary depending on your driving conditions and habits. It's always a good idea to check your owner's manual for specific recommendations.

Can I drive my Derways Plutus with the check engine light on?

It is not recommended to drive your Derways Plutus with the check engine light on, as it indicates that there is an issue with the engine or emissions system that could potentially cause damage if left untreated. It's best to have the issue diagnosed and repaired as soon as possible.

How often should I replace the brake pads on my Derways Plutus?

The brake pads on your Derways Plutus should be replaced every 25,000 to 50,000 miles, depending on your driving habits and conditions. It's important to have your brakes checked regularly by a professional to ensure they are in good working order.

What should I do if my Derways Plutus is overheating?

If your Derways Plutus is overheating, it's important to turn off the engine and let it cool down before attempting any repairs. Check the coolant level and make sure it's at the appropriate level. If the coolant level is low, top it off and check for leaks. If the coolant level is fine, there may be an issue with the radiator or water pump, and it's best to have the vehicle inspected by a professional.

How often should I replace the timing belt on my Derways Plutus?

The timing belt on your Derways Plutus should be replaced every 60,000 to 100,000 miles, depending on the specific model and engine type. It's important to have the timing belt replaced on schedule, as a broken timing belt can cause severe engine damage.

Can I perform maintenance on my Derways Plutus myself?

While some basic maintenance tasks like oil changes and tire rotations can be performed at home, it's recommended to have more complex repairs and maintenance tasks performed by a professional. This ensures that the job is done correctly and prevents any potential safety hazards. Always consult your owner's manual for specific maintenance recommendations and consult a professional mechanic for any concerns or questions.


Brian Wong - Senior Reviews Editor of cars-directory.net

Brian Wong / Author

Brian Wong is an accomplished automotive journalist and editor with a passion for cars. With over a decade of experience in the industry, he has established himself as a trusted voice in the automotive community. Brian has written extensively about a wide range of topics in the field, from the latest trends in car design to innovative safety features and emerging technologies. As a senior reviews editor, he is responsible for test driving and analyzing the latest cars on the market, providing readers with accurate and objective reviews. His articles are widely read and respected for their depth of knowledge and analysis. Brian is committed to staying at the forefront of the latest developments in the automotive industry, and is dedicated to sharing his expertise and insights with his readers.



Updated on February 29, 2024