Common Issues with Chevrolet Orlando and Their Solutions

By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 20, 2024

1. Common Problems by Year and Model

1.1. 2011-2013 Chevrolet Orlando

The Chevrolet Orlando was first introduced in 2011 and was produced until 2018. The 2011-2013 models of the Chevrolet Orlando are known to have some common problems, which can affect their performance and reliability.

One of the most common issues reported by owners of the 2011-2013 Chevrolet Orlando is with the transmission. Some drivers have reported rough shifting or slipping gears, which can be caused by a variety of issues, including low fluid levels, damaged transmission components, or a faulty transmission control module.

Another issue that has been reported is engine misfires or stalling. This can be caused by a number of factors, including a malfunctioning fuel system, faulty spark plugs, or a clogged air filter. If left unresolved, this problem can cause permanent damage to the engine and other components.

Owners of the 2011-2013 Chevrolet Orlando have also reported problems with the suspension and brakes. Some drivers have experienced uneven tire wear, alignment problems, and suspension noise, while others have reported grinding or squeaking brakes. These issues can be caused by worn brake pads, damaged suspension components, or improper wheel alignment.

Other common issues with the 2011-2013 Chevrolet Orlando include faulty sensors or warning lights, dead batteries, and climate control problems. These issues can be caused by a variety of factors, including faulty electrical components, damaged sensors, or a malfunctioning HVAC system.

To address these common problems with the 2011-2013 Chevrolet Orlando, it is recommended that owners seek professional diagnosis and repair from a qualified mechanic. Regular maintenance and servicing can also help prevent these issues from occurring in the first place, and it is important to follow the manufacturer-recommended maintenance schedule and check and maintain proper fluid levels. By taking proper care of their vehicle, owners of the Chevrolet Orlando can enjoy a reliable and enjoyable driving experience.

1.2. 2014-2016 Chevrolet Orlando

The Chevrolet Orlando was produced between 2011 and 2018, with the 2014-2016 models being the second generation of this compact SUV. While these models were generally reliable, there were still some common problems reported by owners.

One of the most common issues with the 2014-2016 Chevrolet Orlando was related to the electrical system. Some drivers reported problems with the vehicle's ignition switch, which could cause the engine to stall or fail to start. In some cases, this problem was also linked to issues with the car's power steering or airbag system.

Another issue reported by some owners was with the vehicle's transmission. Some drivers reported rough shifting or a delay in gear engagement, which could be caused by a malfunctioning transmission control module or worn transmission components. This issue could be further exacerbated by low transmission fluid levels.

Owners of the 2014-2016 Chevrolet Orlando also reported problems with the fuel system, particularly with the fuel pump. Some drivers experienced a loss of power or a complete engine shutdown due to a faulty fuel pump, which could require expensive repairs.

Other common issues with the 2014-2016 Chevrolet Orlando included problems with the air conditioning system, battery drain issues, and suspension problems. Some drivers also reported issues with the vehicle's audio system, such as the radio not functioning properly or the speakers producing distorted sound.

To address these common problems with the 2014-2016 Chevrolet Orlando, it is important to seek diagnosis and repair from a qualified mechanic. Regular maintenance and servicing can also help prevent these issues from occurring in the first place. It is recommended to follow the manufacturer-recommended maintenance schedule, check and maintain proper fluid levels, and drive the vehicle sensibly to avoid aggressive driving that can put additional strain on the vehicle's components.

1.3. 2017-2018 Chevrolet Orlando

The third and final generation of the Chevrolet Orlando was produced between 2017 and 2018, and while these models were generally reliable, there were still some common problems reported by owners.

One of the most common issues with the 2017-2018 Chevrolet Orlando was related to the vehicle's electrical system. Some drivers reported problems with the car's battery drain, which could be caused by a variety of issues, including a malfunctioning alternator or other electrical components. This problem could result in the vehicle failing to start or experiencing intermittent electrical problems.

Another issue reported by some owners was with the vehicle's suspension system. Some drivers reported noise or vibration coming from the suspension system, which could be caused by worn components or improper installation. This issue could be further exacerbated by rough driving conditions or aggressive driving habits.

Owners of the 2017-2018 Chevrolet Orlando also reported problems with the fuel system, particularly with the fuel injectors. Some drivers experienced a loss of power or difficulty starting the engine due to clogged fuel injectors, which could require professional cleaning or replacement.

Other common issues with the 2017-2018 Chevrolet Orlando included problems with the air conditioning system, issues with the vehicle's braking system, and transmission problems. Some drivers also reported issues with the vehicle's infotainment system, such as slow response times or difficulties connecting to mobile devices.

To address these common problems with the 2017-2018 Chevrolet Orlando, it is important to seek diagnosis and repair from a qualified mechanic. Regular maintenance and servicing can also help prevent these issues from occurring in the first place. It is recommended to follow the manufacturer-recommended maintenance schedule, check and maintain proper fluid levels, and drive the vehicle sensibly to avoid aggressive driving that can put additional strain on the vehicle's components.

2. Engine-related Issues

2.1. Engine misfires or stalling

One of the most common engine-related issues that drivers of the Chevrolet Orlando may experience is engine misfires or stalling. This problem can occur in any model year or engine type of the Orlando.

Engine misfires occur when one or more cylinders in the engine fail to ignite properly, which can cause the engine to run roughly or even stall. This can be caused by a variety of issues, including faulty spark plugs, ignition coils, or fuel injectors. Other potential causes include a clogged air filter, a malfunctioning oxygen sensor, or a problem with the engine control module.

Stalling, on the other hand, occurs when the engine suddenly shuts off while driving or idling. This can be caused by similar issues as engine misfires, including problems with the spark plugs, ignition coils, or fuel injectors. Other potential causes include a faulty crankshaft position sensor, a dirty throttle body, or a clogged fuel filter.

To address engine misfires or stalling in the Chevrolet Orlando, it is important to seek diagnosis and repair from a qualified mechanic. They can use diagnostic tools to identify the root cause of the issue and recommend the necessary repairs or replacements. Regular maintenance, such as replacing spark plugs and air filters at the manufacturer-recommended intervals, can also help prevent these issues from occurring. Additionally, following safe driving practices, such as avoiding rapid acceleration or hard braking, can help prevent additional strain on the engine and its components.

2.2. Oil leaks or burning oil

Another common engine-related issue that Chevrolet Orlando drivers may experience is oil leaks or burning oil. This problem can be caused by a variety of issues and can occur in any model year or engine type of the Orlando.

Oil leaks can occur due to a variety of reasons, such as worn-out gaskets or seals, a cracked engine block, or a damaged oil pan. Leaks can be identified by checking the oil level and inspecting the engine for visible oil spots or puddles. It is important to address oil leaks promptly, as low oil levels can cause damage to the engine over time.

Burning oil can also be a problem for Chevrolet Orlando drivers. This occurs when oil is consumed by the engine and burns along with fuel, causing blue smoke to come out of the exhaust. Burning oil can be caused by worn-out piston rings or valve seals, which can allow oil to seep into the combustion chamber. Over time, this can lead to decreased engine performance and increased emissions.

To address oil leaks or burning oil in the Chevrolet Orlando, it is important to seek diagnosis and repair from a qualified mechanic. They can inspect the engine for damage and recommend the necessary repairs or replacements. Regular maintenance, such as checking the oil level and replacing the oil and oil filter at the manufacturer-recommended intervals, can also help prevent these issues from occurring. Additionally, avoiding hard acceleration or overloading the vehicle can help reduce the strain on the engine and its components.

2.3. Overheating or coolant leaks

Overheating or coolant leaks are engine-related issues that can affect the Chevrolet Orlando. These problems can be caused by a variety of factors, including worn-out components, low coolant levels, or a malfunctioning thermostat.

If the engine is overheating, it may be due to a lack of coolant or a malfunctioning thermostat that is not allowing coolant to circulate properly. Other potential causes of overheating include a damaged water pump or a clogged radiator. Symptoms of an overheating engine may include steam coming from under the hood, a high engine temperature gauge reading, or a warning light on the dashboard.

Coolant leaks can also occur in the Chevrolet Orlando due to worn-out hoses, gaskets, or radiator tanks. These leaks can cause the engine to lose coolant, which can lead to overheating and potential engine damage. Signs of a coolant leak may include a sweet smell coming from the engine compartment or visible coolant puddles on the ground.

To address overheating or coolant leaks in the Chevrolet Orlando, it is important to have the vehicle inspected by a qualified mechanic. They can identify the cause of the problem and recommend the necessary repairs or replacements. Regular maintenance, such as checking the coolant level and inspecting hoses and gaskets for wear, can also help prevent these issues from occurring. Additionally, avoiding overloading the vehicle or driving in extreme temperatures can help reduce the strain on the engine and its components.

3. Transmission-related Issues

3.1. Rough shifting or slipping gears

Chevrolet Orlando owners may experience rough shifting or slipping gears, which are transmission-related issues that can impact the vehicle's performance and driving experience. These issues can be caused by a number of factors, including low transmission fluid levels, worn-out clutch components, or a malfunctioning transmission control module.

Low transmission fluid levels can cause the transmission to shift roughly or slip gears, as the fluid is necessary for proper operation of the transmission components. Additionally, worn-out clutch components, such as a slipping clutch or worn-out friction plates, can cause the transmission to slip or shift roughly. Malfunctions in the transmission control module can also cause shifting issues, as this module is responsible for regulating the transmission's shifting patterns.

Symptoms of rough shifting or slipping gears may include a delay in shifting, harsh shifting between gears, or the transmission slipping out of gear. In some cases, the "Check Engine" light may also illuminate on the dashboard.

To address transmission-related issues in the Chevrolet Orlando, it is important to have the vehicle inspected by a qualified mechanic. They can diagnose the issue and recommend the necessary repairs or replacements, such as replacing the transmission fluid or worn-out clutch components. Regular maintenance, such as replacing the transmission fluid at recommended intervals and checking the clutch components for wear, can also help prevent these issues from occurring.

3.2. Transmission fluid leaks or low fluid levels

Another common transmission-related issue in the Chevrolet Orlando is transmission fluid leaks or low fluid levels. Transmission fluid is essential for lubricating and cooling the transmission's internal components, and low fluid levels or leaks can cause significant damage to the transmission over time.

Transmission fluid leaks can be caused by a variety of factors, such as worn-out gaskets or seals, a cracked or damaged transmission pan, or damage to the transmission itself. Low fluid levels can be caused by leaks or by simply not having enough fluid in the system.

Symptoms of transmission fluid leaks or low fluid levels may include difficulty shifting gears, transmission slipping or jerking, or a burning smell coming from the transmission. In some cases, the "Check Engine" light may also illuminate on the dashboard.

To address transmission fluid leaks or low fluid levels in the Chevrolet Orlando, it is important to have the vehicle inspected by a qualified mechanic. They can diagnose the source of the leak and recommend the necessary repairs, such as replacing damaged gaskets or seals, or repairing or replacing a damaged transmission pan. It is also important to regularly check the transmission fluid level and add fluid as necessary to prevent low fluid levels from causing damage to the transmission.

3.3. Unusual noises or vibrations

Unusual noises or vibrations are also common transmission-related issues in the Chevrolet Orlando. These symptoms can be caused by a variety of factors, such as worn-out transmission bearings, damaged gears, or a failing torque converter.

If you notice unusual noises or vibrations coming from the transmission, it is important to have the vehicle inspected by a qualified mechanic as soon as possible. Ignoring these symptoms can lead to further damage to the transmission and more costly repairs.

In some cases, unusual noises or vibrations may be accompanied by difficulty shifting gears or slipping gears, which can indicate a more serious issue with the transmission. It is important to address these symptoms promptly to prevent further damage and to ensure the safety and reliability of the vehicle.

To diagnose and repair unusual noises or vibrations in the Chevrolet Orlando's transmission, a mechanic will typically perform a thorough inspection of the transmission and its internal components. Depending on the root cause of the issue, they may recommend repairs such as replacing worn-out bearings or gears, or repairing or replacing a failing torque converter.

Regular maintenance, such as changing the transmission fluid and filter at the manufacturer-recommended intervals, can help prevent unusual noises or vibrations and other transmission-related issues from occurring in the first place. It is important to follow the manufacturer's recommended maintenance schedule to keep your Chevrolet Orlando's transmission running smoothly and reliably.

4. Electrical Issues

4.1. Dead battery or charging system problems

One common electrical issue that owners of the Chevrolet Orlando may encounter is a dead battery or charging system problems. A dead battery can happen for a variety of reasons, such as leaving the lights or accessories on when the engine is off, or a faulty alternator. Additionally, a faulty charging system can result in an insufficient charge to the battery, leading to stalling, or the car not starting at all.

One potential cause of a dead battery is a faulty alternator. The alternator is responsible for recharging the battery while the car is running, and if it fails, the battery may not receive enough charge to start the car. Another possible cause is leaving the lights or other accessories on when the engine is off, which can drain the battery over time.

If the battery keeps dying, it may be a sign of a charging system problem. A failing charging system may not provide enough charge to the battery, leading to stalling or the car not starting at all. A damaged battery, loose or corroded battery cables, or a faulty voltage regulator can also cause charging system problems.

To diagnose a dead battery or charging system problem, a mechanic may perform a battery test and alternator test to check the charging system's output. The battery may also be tested for its ability to hold a charge.

If a dead battery or charging system problem is identified, the solution may be as simple as replacing the battery or alternator. In some cases, the battery cables may need to be replaced or cleaned, or the voltage regulator may need to be repaired or replaced. Regular maintenance, such as checking the battery terminals for corrosion and keeping the battery charged, can also help prevent these issues from occurring.

4.2. Malfunctioning power windows or locks

Malfunctioning power windows or locks are common electrical issues that Chevrolet Orlando owners may encounter. Power windows and locks are convenient features that allow easy operation and control of a vehicle's windows and locks. However, when these features fail, they can be frustrating and inconvenient.

One of the most common causes of power window and lock malfunction is a faulty switch. The switch may become worn out over time or may be damaged due to water exposure. This can cause the window or lock to stop functioning or work intermittently. In some cases, the entire switch assembly may need to be replaced.

Another possible cause of power window and lock malfunction is a broken or damaged window regulator. The regulator is responsible for moving the window up and down, and if it is broken, the window may not move or may move slowly. This can also cause strain on the window motor, which may lead to its failure.

In some cases, a blown fuse or a wiring issue may be the cause of power window and lock malfunction. The fuse is designed to protect the system from power surges and overloads. If the fuse is blown, the system will not receive power and will not function. Wiring issues can also cause problems with the power windows and locks, especially if the wires are frayed, corroded, or damaged.

To resolve power window and lock issues, it is best to take the vehicle to a trusted mechanic or dealership. A qualified technician will be able to diagnose the problem and suggest the best course of action. Depending on the issue, the repair may involve replacing a switch, regulator, motor, fuse, or wiring. Regular maintenance and inspection of the power window and lock system can help prevent issues from occurring and prolong the life of the components.

4.3. Faulty sensors or warning lights

Electrical issues are among the most common problems experienced by vehicle owners, including Chevrolet Orlando owners. Some of the electrical issues that have been reported with the Chevrolet Orlando include faulty sensors and warning lights.

One common problem is the check engine light coming on, indicating that there is a malfunction in the vehicle's systems. This can be caused by a variety of issues, including a faulty sensor or an issue with the vehicle's emissions system. It's important to have the issue diagnosed as soon as possible to prevent further damage to the vehicle.

Another issue that has been reported by some Chevrolet Orlando owners is the malfunction of various warning lights. This can include the ABS warning light, the traction control warning light, or the airbag warning light. When one of these lights comes on, it can indicate a problem with the corresponding system and should be addressed promptly.

In some cases, the issue may be caused by a faulty sensor. For example, a malfunctioning oxygen sensor can cause the check engine light to come on and affect the vehicle's performance. A faulty ABS sensor can cause the ABS warning light to come on and affect the vehicle's braking system.

Overall, if you experience any issues with sensors or warning lights in your Chevrolet Orlando, it's important to have the vehicle diagnosed by a qualified mechanic to identify and address the underlying problem.

5. Suspension and Brake Issues

5.1. Uneven tire wear or alignment problems

One common problem that Chevrolet Orlando owners may encounter is uneven tire wear or alignment issues. If the wheels are not aligned properly, the tires can wear out unevenly, leading to a bumpy and uncomfortable ride. In addition, poor alignment can affect the handling and safety of the vehicle, making it more difficult to control in certain situations.

Another possible cause of uneven tire wear is worn or damaged suspension components. The suspension system is responsible for supporting the weight of the vehicle and providing a smooth ride. If any of the suspension parts, such as the shocks or struts, are worn or damaged, they can cause the vehicle to bounce or sway, leading to uneven tire wear.

To avoid these issues, it's important to have the alignment and suspension of your Chevrolet Orlando checked regularly by a qualified mechanic. They can inspect the vehicle for any worn or damaged components and make the necessary repairs or replacements. Additionally, it's important to rotate your tires on a regular basis to ensure even wear and extend their lifespan.

Another issue that can affect the suspension and brakes of your Chevrolet Orlando is worn brake pads or rotors. These components are responsible for slowing down and stopping the vehicle, and if they are worn or damaged, they can affect the performance of the entire braking system. This can lead to longer stopping distances and reduced control of the vehicle.

To avoid these issues, it's important to have your brake pads and rotors checked regularly by a qualified mechanic. They can inspect the components for any signs of wear or damage and make the necessary replacements. Additionally, it's important to have your brakes serviced regularly to ensure that they are functioning properly and to avoid any potential safety hazards.

5.2. Grinding or squeaking brakes

Another common issue that some Chevrolet Orlando owners have reported is grinding or squeaking brakes. This can be caused by a number of different factors, including worn brake pads, damaged brake rotors, or contaminated brake fluid.

Worn brake pads are a common cause of brake noise, and they should be inspected regularly and replaced if they are worn down to the minimum thickness. Damaged brake rotors can also cause noise, and they may need to be resurfaced or replaced if they are warped or damaged.

Contaminated brake fluid can also cause problems with the brake system, leading to noisy brakes. If the brake fluid is dirty or contaminated, it may need to be flushed and replaced.

In some cases, the noise may be caused by a problem with the brake calipers, such as a sticking piston or worn seals. This can cause uneven wear on the brake pads and rotors, and may require the calipers to be replaced.

Regardless of the cause, any noise or grinding when applying the brakes should be taken seriously and addressed promptly. Not only can it be a sign of a potentially dangerous brake problem, but it can also lead to further damage to the braking system if left unaddressed.

5.3. Suspension noise or bumpy ride

One of the most common suspension and brake issues with the Chevrolet Orlando is suspension noise and a bumpy ride. This can be caused by a variety of factors, including worn out suspension components, damaged shocks or struts, or uneven tire wear.

Worn out suspension components, such as ball joints or tie rod ends, can cause a clunking or banging noise when driving over bumps or uneven roads. Damaged shocks or struts can cause the car to bounce or feel unstable while driving. Uneven tire wear, which can be caused by misaligned wheels, can also contribute to a bumpy ride.

If you experience any of these symptoms, it's important to have your suspension system inspected by a professional mechanic. They can diagnose the exact cause of the problem and recommend the appropriate repairs or replacement parts. Neglecting suspension issues can lead to further damage or even a potential safety hazard while driving.

6. Interior and Exterior Issues

6.1. Faulty climate control or air conditioning

One common issue reported by Chevrolet Orlando owners is problems with their climate control or air conditioning systems. These issues may include poor cooling performance, the air conditioning not working at all, or the system blowing out hot air instead of cold. In some cases, the climate control system may fail to respond to temperature changes or settings, leading to discomfort for the driver and passengers.

There are several potential causes for these issues. One common culprit is a refrigerant leak, which can result in reduced cooling performance or the complete failure of the air conditioning system. Another possible cause is a faulty compressor, which can prevent the system from properly pressurizing and circulating refrigerant.

Other potential causes of climate control or air conditioning problems in the Chevrolet Orlando include a clogged or dirty air filter, a malfunctioning control panel or switch, or a damaged blower motor. In some cases, the issue may be related to electrical problems or a blown fuse.

To diagnose and fix climate control or air conditioning issues in the Chevrolet Orlando, it is important to have the system inspected by a qualified mechanic. The mechanic will typically perform a series of tests to identify the underlying cause of the problem and determine the most effective repair strategy. This may involve repairing or replacing damaged components, cleaning or flushing the system, or recharging the refrigerant. In some cases, more extensive repairs may be necessary, such as replacing the compressor or other major components of the system.

Overall, while issues with climate control or air conditioning can be frustrating for Chevrolet Orlando owners, they are generally fixable with the help of a qualified mechanic. By addressing these issues promptly, drivers can ensure that their vehicles remain comfortable and reliable even in hot or humid weather conditions.

6.2. Interior trim or upholstery problems

The Chevrolet Orlando has had some reported issues related to the interior and exterior of the vehicle. Some owners have experienced problems with the interior trim or upholstery. This includes issues with the fabric or leather upholstery, which can wear prematurely or become damaged. Additionally, some drivers have reported issues with the interior trim, such as cracking or peeling on the dashboard or door panels.

Other interior-related issues reported by owners include problems with the audio system, such as speakers that stop working or malfunctioning radio displays. Additionally, some drivers have reported issues with the climate control system, including the air conditioning not working properly or producing insufficient cool air.

On the exterior of the vehicle, some owners have reported issues with the paint or bodywork. This includes problems with paint that peels or fades prematurely, as well as dents or other damage to the bodywork that can occur in minor accidents.

Overall, while these issues are not extremely common, they do highlight the importance of inspecting the interior and exterior of the vehicle thoroughly before purchasing, and of ensuring that any necessary repairs are carried out promptly to prevent further damage or deterioration.

6.3. Exterior paint or body damage

The Chevrolet Orlando has some reported issues related to the exterior paint and body damage. Some owners have reported that the paint on the car starts to peel or chip off prematurely, which can be an eyesore and lower the value of the vehicle. Additionally, some owners have reported issues with the body of the car, including rusting and corrosion. This can be a serious problem as it can weaken the structure of the vehicle and compromise the safety of passengers.

In some cases, owners have reported issues with the doors not closing properly, which can be a safety hazard if the doors were to unexpectedly open while driving. This can also result in water or air leaks into the cabin, which can cause damage to the interior of the car.

Furthermore, some owners have reported issues with the sunroof, including leaks and malfunctioning parts. The sunroof is a popular feature in the Orlando, so it can be disappointing to have it not function properly.

Overall, while the exterior paint and body damage issues are not extremely common, they can be serious problems that owners should keep an eye out for. It is important to address these issues as soon as possible to prevent further damage to the car and ensure the safety of passengers.

7. Fuel System Issues

7.1. Poor fuel economy or high emissions

The Chevrolet Orlando may experience fuel system issues that can cause poor fuel economy and high emissions. There are several reasons why this might happen, including problems with the fuel injectors, fuel pump, or oxygen sensors. Fuel injectors can become clogged or damaged over time, causing them to spray fuel improperly or not at all, which can cause the engine to run inefficiently. A malfunctioning fuel pump can also cause fuel delivery problems and result in a decrease in fuel efficiency.

Oxygen sensors are responsible for measuring the amount of oxygen in the exhaust gases and providing this information to the engine control module, which then adjusts the fuel-air mixture accordingly. If the oxygen sensors are not functioning properly, the engine may run too rich or too lean, which can lead to increased fuel consumption and emissions.

Other factors that can contribute to poor fuel economy include a dirty air filter, worn spark plugs, or a malfunctioning mass airflow sensor. These components are all crucial to the proper operation of the engine and can impact fuel efficiency if not functioning correctly.

It is important to address any fuel system issues as soon as possible to prevent further damage and improve fuel efficiency. Regular maintenance and inspections can help to identify potential issues before they become more serious problems. In addition, proper driving habits, such as avoiding excessive idling and maintaining proper tire pressure, can also help to improve fuel economy and reduce emissions.

7.2. Fuel leaks or clogged fuel injectors

The fuel system of the Chevrolet Orlando is a critical component that ensures proper engine performance and fuel efficiency. However, over time, it can develop problems that affect the vehicle's overall performance. One of the most common fuel system issues in the Chevrolet Orlando is fuel leaks, which can cause safety hazards, including engine fires. Fuel leaks often result from damaged or worn-out fuel lines or a damaged fuel tank. It is essential to address fuel leaks immediately by seeking professional help to prevent potential accidents.

Another common issue with the fuel system of the Chevrolet Orlando is clogged fuel injectors. Fuel injectors play a crucial role in regulating the flow of fuel to the engine, which is necessary for optimal engine performance. When fuel injectors become clogged, they can cause a wide range of problems, including engine misfires, reduced fuel efficiency, and engine stalling. Clogged fuel injectors are often caused by the buildup of dirt, debris, and other contaminants in the fuel system. Regular maintenance, such as fuel system cleaning, can help prevent clogged fuel injectors and improve overall engine performance.

7.3. Fuel pump or fuel filter failures

The fuel pump and fuel filter are critical components of a vehicle's fuel system. In the Chevrolet Orlando, these components can sometimes fail and cause issues for the vehicle's performance. A faulty fuel pump can cause the engine to stall or fail to start. A clogged fuel filter can cause a decrease in engine power, hesitation, and reduced fuel economy.

If the fuel pump or fuel filter is suspected to be the cause of the problem, a mechanic should inspect and test them to determine if they need to be replaced. It is important to use high-quality, OEM parts to ensure proper function and longevity.

In some cases, a failing fuel pump or filter may cause a check engine light to illuminate on the dashboard. If this occurs, the vehicle's onboard diagnostic system can be used to read the error code and pinpoint the issue. Prompt attention to fuel system issues can prevent further damage to the engine and other components.

8. Common Solutions

8.1. Regular maintenance and servicing

Regular maintenance and servicing are crucial to keeping your Chevrolet Orlando running smoothly and avoiding potential issues. Some common maintenance tasks include changing the oil and oil filter, replacing air filters, checking and topping off fluids (such as coolant, brake fluid, and transmission fluid), inspecting and replacing worn-out belts and hoses, and rotating and balancing tires.

It's also important to follow the recommended service schedule for your vehicle, which can be found in your owner's manual. This schedule will outline when certain maintenance tasks should be performed, such as replacing spark plugs, timing belts, and other parts that may wear out over time.

Regular servicing can help catch potential issues before they become major problems, saving you money and preventing breakdowns. Additionally, keeping up with maintenance can help maintain the resale value of your vehicle.

If you do experience any issues with your Chevrolet Orlando, it's important to bring it to a qualified mechanic or dealership for repairs. They will have the knowledge and expertise to diagnose and fix any problems, ensuring that your vehicle is running safely and efficiently.

8.2. Replace faulty components or parts

When it comes to fixing issues with the Chevrolet Orlando, one common solution is to replace any faulty components or parts. This can be done for a wide range of issues, such as faulty sensors, worn-out brake pads, malfunctioning power windows or locks, and more.

Replacing faulty components is often the most effective solution, as it directly addresses the root cause of the problem. It can also prevent the issue from recurring in the future. However, it's important to use high-quality replacement parts and to have the replacement work done by a certified mechanic or technician.

While it may be tempting to try to save money by using cheaper, lower-quality replacement parts or attempting DIY repairs, this can often lead to further complications and more costly repairs in the long run. It's always best to invest in quality replacement parts and to have the work done by a professional who has the expertise and experience to ensure that the repair is done correctly.

8.3. Upgrade to newer or better quality parts

The Chevrolet Orlando is a reliable and practical vehicle that has received positive reviews from drivers and critics alike. However, like any vehicle, it may experience issues with certain components or parts over time. If you find that you are frequently needing to replace a particular part or component, upgrading to a newer or better quality part may be a wise solution.

For example, upgrading to high-performance brake pads may improve braking performance and reduce brake dust. Similarly, installing a high-quality air filter may improve engine performance and fuel efficiency. Upgrading to more durable suspension components, such as shock absorbers or struts, may also improve ride comfort and handling.

When considering an upgrade to newer or better quality parts, it is important to research and select reputable brands with a proven track record of reliability and performance. You should also consult with a qualified mechanic or technician to ensure that the upgraded parts are compatible with your vehicle and properly installed.

In addition to upgrading individual parts, regular maintenance and servicing can also help to prevent issues and extend the lifespan of your vehicle. This may include oil changes, tire rotations, brake inspections, and other routine services recommended by the manufacturer. By staying on top of maintenance and investing in quality parts, you can help keep your Chevrolet Orlando running smoothly for years to come.

9. Prevention and Maintenance Tips

9.1. Follow manufacturer-recommended maintenance schedule

To keep your Chevrolet Orlando in top condition, it is important to follow the manufacturer-recommended maintenance schedule. Regular maintenance can help prevent potential issues and keep your vehicle running smoothly. This schedule typically includes routine tasks such as oil changes, tire rotations, brake inspections, and fluid level checks.

In addition to following the maintenance schedule, it is also important to pay attention to any unusual sounds or behaviors from your vehicle. These could be warning signs of a potential issue that may require attention from a mechanic.

It is also important to use high-quality parts and fluids when performing maintenance on your Chevrolet Orlando. Using low-quality or incorrect parts can lead to further issues down the line.

Regularly washing and waxing the exterior of your vehicle can also help prevent damage and keep it looking its best. Additionally, protecting the interior of your vehicle from excessive wear and tear, such as using seat covers or floor mats, can help maintain its value.

By following these preventative maintenance tips and taking care of your Chevrolet Orlando, you can help ensure a long and reliable lifespan for your vehicle.

9.2. Check and maintain proper fluid levels

Proper fluid levels are essential for the optimal functioning of the Chevrolet Orlando. Regularly checking and maintaining fluid levels is an important preventive maintenance measure that can help prolong the life of the vehicle and prevent major issues. The fluids that need to be checked and maintained include engine oil, transmission fluid, brake fluid, power steering fluid, and coolant.

The engine oil lubricates the engine components and prevents friction and wear. It is important to check the oil level regularly and change it as recommended by the manufacturer. Similarly, the transmission fluid plays a crucial role in the smooth operation of the transmission system. Low or dirty transmission fluid can cause shifting problems, slippage, or even damage the transmission.

The brake fluid is responsible for transmitting the brake pedal pressure to the brake calipers or drums. Low brake fluid can cause brake failure or reduce the effectiveness of the braking system. Power steering fluid helps in the ease of steering, and low or contaminated fluid can cause difficulty in steering.

The coolant or antifreeze regulates the engine temperature and prevents overheating. Low or dirty coolant can cause the engine to overheat, leading to engine damage. It is important to check the coolant level and quality regularly and flush and replace it as recommended by the manufacturer.

Regularly checking and maintaining proper fluid levels can prevent costly repairs and breakdowns and ensure the optimal performance of the Chevrolet Orlando.

9.3. Drive sensibly and avoid aggressive driving

Driving aggressively can cause wear and tear on your Chevrolet Orlando and may lead to expensive repairs. Avoiding rapid acceleration and braking, driving within the speed limit, and anticipating stops can reduce the strain on your vehicle's engine, transmission, brakes, and suspension. Additionally, aggressive driving can also lead to poor fuel efficiency, increasing the frequency of refueling and expenses. By driving sensibly and avoiding aggressive driving, you can extend the lifespan of your vehicle and save money on repairs and fuel costs.

10. Warranty and Recall Information

10.1. Chevrolet Orlando warranty coverage

The Chevrolet Orlando comes with a standard limited warranty that covers the vehicle for 3 years or 36,000 miles, whichever comes first. This includes coverage for repairs or replacement of any defective materials or workmanship in the vehicle's components and parts.

In addition to the standard warranty, Chevrolet also offers extended warranty options for the Orlando. These options include the Chevrolet Protection Plan, which can extend coverage for up to 5 years or 60,000 miles, and the Chevrolet Extended Limited Warranty, which can extend coverage for up to 6 years or 70,000 miles.

It is important to note that the warranty coverage may vary depending on the specific components or parts that need repair or replacement. It is recommended to refer to the Chevrolet Orlando Owner's Manual or contact a Chevrolet dealership for specific warranty information.

In the event of a safety-related defect, Chevrolet may issue a recall for affected vehicles. Owners of affected vehicles will be notified by mail and instructed to bring their vehicle to a Chevrolet dealership for a free repair. It is important to promptly address any recall notices to ensure the safety and performance of the vehicle. Owners can also check for any open recalls by entering their vehicle's VIN number on the National Highway Traffic Safety Administration's website.

10.2. Recall notices and campaigns

Recall notices and campaigns are an important aspect of owning a vehicle, and it's crucial to stay informed about any potential issues that could affect the safety or performance of your car. As such, it's important to regularly check for any recalls or campaigns related to your Chevrolet Orlando.

If there are any safety concerns with your vehicle, the manufacturer may issue a recall to address the issue. This means that they will contact you to bring the vehicle to an authorized dealership for repair or replacement of any faulty parts at no cost to you. In some cases, the manufacturer may also offer a refund or replacement vehicle if the issue cannot be resolved.

In addition to safety recalls, there may be campaigns related to non-safety issues that could affect the performance or reliability of your vehicle. These campaigns may involve a software update, a fix for a non-critical mechanical issue, or an upgrade to a particular component.

To check for any recalls or campaigns related to your Chevrolet Orlando, you can visit the official website of the manufacturer or the National Highway Traffic Safety Administration (NHTSA). You will need to provide your vehicle identification number (VIN) to check for any open recalls or campaigns.

It's important to take any recalls or campaigns seriously and take action as soon as possible. Failing to do so could lead to potential safety hazards or damage to your vehicle. If you receive a recall notice or campaign, it's recommended to contact your local Chevrolet dealership to schedule an appointment for repair or service.

11. Conclusion

11.1. Summary of common issues and solutions

The Chevrolet Orlando, like any other vehicle, is prone to various issues and problems that owners may face during their ownership. However, many of these issues have solutions that can help owners save money and avoid major repairs.

One common issue with the Chevrolet Orlando is suspension noise or a bumpy ride, which can be caused by worn-out shocks, struts, or bushings. Replacing these components can help improve the ride quality and reduce noise. Similarly, faulty climate control or air conditioning can be resolved by replacing the AC compressor, condenser, or evaporator.

Fuel system issues are also common with the Chevrolet Orlando, including poor fuel economy, high emissions, fuel leaks, and clogged fuel injectors. Regular maintenance and servicing, such as fuel filter replacement, can help prevent these issues from occurring. Additionally, upgrading to newer or better quality parts, such as fuel injectors or fuel pumps, can improve fuel efficiency and performance.

To prevent these issues from happening, it's important to follow the manufacturer-recommended maintenance schedule, check and maintain proper fluid levels, and drive sensibly to avoid aggressive driving. By doing so, owners can help prolong the life of their Chevrolet Orlando and avoid costly repairs.

If owners do experience issues with their Chevrolet Orlando, it's important to be aware of the warranty coverage and recall notices and campaigns that may be applicable to their vehicle. This information can be obtained from the manufacturer or dealership.

Overall, the Chevrolet Orlando is a reliable vehicle with common issues that can be resolved through regular maintenance, proper care, and proactive solutions.

11.2. Importance of proper maintenance and repair

Proper maintenance and repair are crucial for the longevity and performance of any vehicle, including the Chevrolet Orlando. Regularly scheduled maintenance and timely repairs can help prevent costly repairs down the road. By following the manufacturer's recommended maintenance schedule, checking and maintaining proper fluid levels, and addressing issues as soon as they arise, drivers can keep their Chevrolet Orlando running smoothly and avoid more significant problems in the future.

It is also important to use high-quality replacement parts when repairing the vehicle. Upgrading to newer or better quality parts can improve the vehicle's overall performance and prevent future issues. Additionally, driving sensibly and avoiding aggressive driving can help reduce wear and tear on the vehicle, as well as improve fuel economy.

Owners should also be aware of any warranty coverage and recall notices related to their Chevrolet Orlando. Keeping up-to-date on recalls and campaigns can help ensure the safety of the vehicle and its occupants.

11.3. Final thoughts and recommendations.

In conclusion, the Chevrolet Orlando is a versatile and reliable vehicle that offers a lot of features for its price range. However, like any vehicle, it can experience common issues such as transmission problems, electrical issues, and fuel system issues. To prevent these issues from happening, it's important to follow the manufacturer-recommended maintenance schedule, regularly check and maintain proper fluid levels, and drive sensibly and avoid aggressive driving.

In case of any issues, it's important to have the vehicle checked and repaired by a certified Chevrolet mechanic to ensure proper diagnosis and repair. It's also important to take advantage of the warranty coverage and recall notices provided by Chevrolet to address any issues that may arise.

Overall, the Chevrolet Orlando is a good vehicle for families and individuals who are looking for a reliable and practical car. With proper maintenance and care, it can last for years and provide a smooth and enjoyable driving experience.

Example List of chevrolet orlando Engine Error Codes and Descriptions

Frequently Asked Questions (FAQ) about Chevrolet Orlando Issues

• Do you have problems with car?
• Write a Review