Manual for carina AT211
 

Wish anybody could send me an engine manual for
TOYOTA CARINA Si
model AT 211 YEAR NOVEMBER 1998,
ENGINE 7A-FE
1762 CC
MANUAL TRANSMISSION.

I am in Mauritius. My name is Imran Kassim. I purchased my car some 4 years back. I have a problem with the engine. unfortunately the local representative of Toyota has no imported the above mentioned model. One of the 4 cylinders does not operate properly. I need to change the poppet valve and mushroom valve.
the problem is that i don't have the specifications.
Could anybody pse help.
If u can send me a manual I can effect the payment through credit transfer.
my address is
Imran KASSIM
MISSON CROSS RD
OLD GRAND PORT
MAURITIUS
INDIAN OCEAN

thanks for all support.

What specifications do you need? Original part numbers?

Remove the cylinder head but before that, turn the flywheel to TDC or 5 degree and try move the timing belt from the cylinder head without turning the flywheel by loosing the tensor. Make sure that you also see the mark on the tappet pulley that inline to mark on the body of the cylinder head or mark with mark ink or center punch inline if not shown on the body of the cylinder head. Once the head remove, then try measure the valve clearance before removing any valve so you can use the clearance unit when you return the valve. Now you can change any damaged valve.

Hope this piece of message can assist you, please advise if any further assist. :o

search on the net..or you can ask your dealer for it..