Home
Car Specs Opel Monza Monza A1 3.0 E (150 Hp)
Opel Monza A1 3.0 E (150 Hp) Specs
Opel Monza A1 3.0 E (150 Hp) has been in production since 1978 - 1982. Cars comes in Coupe body types and can be suited with Petrol (Gasoline) engine types with a volume of 3L liters, engines produces a power of 150 Hp. The overall dimensions of the car are 4692x1734x1380 mm, and the weight is from 1375 kg.
General data Generation Monza A1 Modification 3.0 E (150 Hp) Start of production 1978 year End of production 1982 year Powertrain Architecture Internal Combustion engine Body type Coupe Seats 4 Doors 3 Fuel Type Petrol (Gasoline) Performance specs Acceleration 0 - 100 km/h (0 - 62 mph) 9.5 sec Maximum speed 198 km/h Weight-to-power ratio 9.2 kg/Hp, 109.1 Hp/tonne Engine technical data Power 150 Hp @ 5200 rpm. Power per litre 50.5 Hp/l Torque 231 Nm @ 3400 rpm. Engine displacement 2969 cm3 Number of cylinders 6 Position of cylinders Inline Cylinder Bore 95 mm Piston Stroke 69.8 mm Compression ratio 9.3 Number of valves per cylinder 2 Fuel System Carburettor Engine aspiration Naturally aspirated engine Valvetrain SOHC Suspension and brakes specs Drivetrain Architecture The Internal combustion engine (ICE) drives the rear wheels of the vehicle. Drive wheel Rear wheel drive Number of Gears (manual transmission) 4 Front brakes Ventilated discs Rear brakes Disc Dimensions Length 4692 mm Width 1734 mm Height 1380 mm Wheelbase 2668 mm Front track 1443 mm Rear (Back) track 1472 mm Ride height 140 mm Drag coefficient (Cd) 0.41 Minimum turning circle (turning diameter) 10.8 m Weights, volume and space Kerb Weight 1375 kg Max. weight 1900 kg Max load 525 kg Trunk (boot) space - minimum 425 l Trunk (boot) space - maximum 765 l Fuel tank capacity 70 l Permitted trailer load with brakes (12%) 1700 kg Permitted trailer load without brakes 700 kg